Messages in this thread | | | Date | Fri, 9 Dec 2011 13:23:33 -0600 | From | Scott Wood <> | Subject | Re: [PATCH 1/2] mtd/nand : set Nand flash page address to FBAR and FPAR correctly |
| |
On 12/09/2011 03:42 AM, shuo.liu@freescale.com wrote: > From: Liu Shuo <b35362@freescale.com> > > If we use the Nand flash chip whose number of pages in a block is greater > than 64(for large page), we must treat the low bit of FBAR as being the > high bit of the page address due to the limitation of FCM, it simply uses > the low 6-bits (for large page) of the combined block/page address as the > FPAR component, rather than considering the actual block size. > > Signed-off-by: Liu Shuo <b35362@freescale.com> > Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> > Signed-off-by: Tang Yuantian <b29983@freescale.com> > Signed-off-by: Li Yang <leoli@freescale.com> > --- > drivers/mtd/nand/fsl_elbc_nand.c | 13 ++++++++++--- > 1 files changed, 10 insertions(+), 3 deletions(-)
Acked-by: Scott Wood <scottwood@freescale.com>
-Scott
| |