lkml.org 
[lkml]   [2011]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] gpio: Explicitly index samsung_gpio_cfgs
Date
Make it easier to follow the by number references into samsung_gpio_cfgs
by putting the indexes into the code initialising the array, improving
readability a bit. Ideally we wouldn't be using magic array indexes at all
but this is easier than coming up with a better way.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/gpio/gpio-samsung.c | 29 +++++++++++++++++++----------
1 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 6b4d23f..f1c1ecd 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -470,33 +470,42 @@ static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
#endif

static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
- {
+ [0] = {
.cfg_eint = 0x0,
- }, {
+ },
+ [1] = {
.cfg_eint = 0x3,
- }, {
+ },
+ [2] = {
.cfg_eint = 0x7,
- }, {
+ },
+ [3] = {
.cfg_eint = 0xF,
- }, {
+ },
+ [4] = {
.cfg_eint = 0x0,
.set_config = samsung_gpio_setcfg_2bit,
.get_config = samsung_gpio_getcfg_2bit,
- }, {
+ },
+ [5] = {
.cfg_eint = 0x2,
.set_config = samsung_gpio_setcfg_2bit,
.get_config = samsung_gpio_getcfg_2bit,
- }, {
+ },
+ [6] = {
.cfg_eint = 0x3,
.set_config = samsung_gpio_setcfg_2bit,
.get_config = samsung_gpio_getcfg_2bit,
- }, {
+ },
+ [7] = {
.set_config = samsung_gpio_setcfg_2bit,
.get_config = samsung_gpio_getcfg_2bit,
- }, {
+ },
+ [8] = {
.set_pull = exynos4_gpio_setpull,
.get_pull = exynos4_gpio_getpull,
- }, {
+ },
+ [9] = {
.cfg_eint = 0x3,
.set_pull = exynos4_gpio_setpull,
.get_pull = exynos4_gpio_getpull,
--
1.7.7.3


\
 
 \ /
  Last update: 2011-12-07 17:35    [W:0.060 / U:1.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site