Messages in this thread |  | | Date | Wed, 7 Dec 2011 18:58:17 +0800 | | From | Shawn Guo <> | | Subject | Re: [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec_stop() |
| |
On Wed, Dec 07, 2011 at 11:42:28AM +0100, Lothar Waßmann wrote: > Hi, > > Shawn Guo writes: > > On Tue, Dec 06, 2011 at 11:27:14AM +0100, Lothar Waßmann wrote: > > > Additionally to setting the ETHER_EN bit in FEC_ECNTRL the MII/RMII > > > setting in FEC_R_CNTRL needs to be preserved to keep the MII interface > > > > s/MII/RMII? From what I see from imx28 and imx6q RM, the reset state > > for this setting is MII mode. > > > > > functional. > > > > > > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> > > > --- > > > drivers/net/ethernet/freescale/fec.c | 5 ++++- > > > 1 files changed, 4 insertions(+), 1 deletions(-) > > > > I assume this is fixing a problem you are seeing on imx28 only. > > Do you see the problem on imx53/51? > > > No. i.MX53 uses the RMII gasket which is not affected by resetting the > controller. And imMX51 does not support RMII at all. > > > > > > > diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c > > > index 11534b9..ab0afb5 100644 > > > --- a/drivers/net/ethernet/freescale/fec.c > > > +++ b/drivers/net/ethernet/freescale/fec.c > > > @@ -515,6 +515,7 @@ fec_stop(struct net_device *ndev) > > > struct fec_enet_private *fep = netdev_priv(ndev); > > > const struct platform_device_id *id_entry = > > > platform_get_device_id(fep->pdev); > > > + u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8); > > > > This bit is only available on ENET (imx28 and imx6q). Do we want to > > do the same thing for FEC (imx25/27/35/51/53)? > > > No. AFAICT that's not necessary there. > So you need to check it's actually running on ENET before accessing the bit.
-- Regards, Shawn
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |