lkml.org 
[lkml]   [2011]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] mtd/nand : set correct length to FBCR for a non-full-page write
Date
From: Liu Shuo <b35362@freescale.com>

When we do a non-full-page write, the length be set to FBCR should
not be 'elbc_fcm_ctrl->index', it should be 'elbc_fcm_ctrl->index -
elbc_fcm_ctrl->column'.

Signed-off-by: Liu Shuo <b35362@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
---
drivers/mtd/nand/fsl_elbc_nand.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 6fce7da..d634c5f 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -474,7 +474,8 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
*/
if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
- out_be32(&lbc->fbcr, elbc_fcm_ctrl->index);
+ out_be32(&lbc->fbcr,
+ elbc_fcm_ctrl->index - elbc_fcm_ctrl->column);
else
out_be32(&lbc->fbcr, 0);

--
1.7.1



\
 
 \ /
  Last update: 2011-12-04 06:51    [W:1.997 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site