lkml.org 
[lkml]   [2011]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH] davinci: DA850 EVM: OHCI platform code
    Hello.

    On 20.12.2011 10:36, Manjunathappa, Prakash wrote:

    > From: Ajay Kumar Gupta <ajay.gupta@ti.com>

    It's a good practice to CC the original author of the patch -- which I'm
    doing now...

    > On this board the OHCI port's power control and over-current signals from
    > TPS2065 power switch are connected via GPIO1[15] and GPIO2[1] respectively,

    Ajay, your description seems to be copied unchganged from the analogous
    DA830 EVM patch, and thus doesn't match your patch: GPIO2[4] and GPIO6[13] are
    used apparently. Be more attentive to detail next time please.

    > so we can implement the DA8xx OHCI glue layer's hooks for overriding the
    > root hub port's power and over-current status bits.

    > We also have to properly set up the clocking mode in the CFGCHIP2 register,
    > so that internal 24 MHz reference clock is fed to the USB 2.0 (MUSB) PHY and
    > its output is used to clock the USB 1.1 (OHCI) PHY...

    > Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
    > ---
    > arch/arm/mach-davinci/board-da850-evm.c | 126 +++++++++++++++++++++++++++++++
    > 1 files changed, 126 insertions(+), 0 deletions(-)
    >
    > diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
    > index 6659a90..df74ba5 100644
    > --- a/arch/arm/mach-davinci/board-da850-evm.c
    > +++ b/arch/arm/mach-davinci/board-da850-evm.c
    [...]
    > @@ -734,6 +736,127 @@ static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
    [...]
    > +static int da850_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
    > +{
    > + int irq = gpio_to_irq(ON_BD_USB_OVC);
    > + int error = 0;
    > +
    > + if (handler != NULL) {
    > + da850_evm_usb_ocic_handler = handler;
    > +
    > + error = request_irq(irq, da850_evm_usb_ocic_irq, IRQF_DISABLED |

    IRQF_DISABLED is a nop now -- just remove it.

    WBR, Sergei


    \
     
     \ /
      Last update: 2011-12-20 12:11    [W:0.042 / U:1.252 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site