lkml.org 
[lkml]   [2011]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: System freezes with high network activity
    Hi,

    attached is the dmesg without the clocksource option.

    the nohz=off *seems* to avoid the problem, I'm testing with NFS and Iperf now.

    Thanks.

    On Fri, Dec 2, 2011 at 8:43 PM, john stultz <johnstul@us.ibm.com> wrote:
    > So, could you attach a full dmesg when you're not using
    > clocksource=jiffies?
    >
    > Also, when not using clocksource=jiffies, does booting with nohz=off
    > change the behavior?
    >
    > thanks
    > -john
    >
    >
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jun 13 04:13:06 UTC 2011
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] NSC Geode by NSC
    [ 0.000000] Cyrix CyrixInstead
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] Transmeta GenuineTMx86
    [ 0.000000] Transmeta TransmetaCPU
    [ 0.000000] UMC UMC UMC UMC
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003def0000 (usable)
    [ 0.000000] BIOS-e820: 000000003def0000 - 000000003defa000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000003defa000 - 000000003df00000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003df00000 - 0000000040000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] DMI present.
    [ 0.000000] last_pfn = 0x3def0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CBFFF write-protect
    [ 0.000000] CC000-DBFFF uncachable
    [ 0.000000] DC000-E3FFF write-back
    [ 0.000000] E4000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 base 003E000000 mask FFFE000000 uncachable
    [ 0.000000] 2 base 00E0000000 mask FFFE000000 write-combining
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01800000
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037000000 page 2M
    [ 0.000000] 0037000000 - 00373fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
    [ 0.000000] RAMDISK: 36f50000 - 3779f668
    [ 0.000000] Allocated new RAMDISK: 00100000 - 0094f668
    [ 0.000000] Move RAMDISK from 0000000036f50000 - 000000003779f667 to 00100000 - 0094f667
    [ 0.000000] ACPI: RSDP 000f7f60 00014 (v00 PTLTD )
    [ 0.000000] ACPI: RSDT 3def619d 00034 (v01 PTLTD RSDT 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 3def9e3e 00074 (v01 SiS 755F 06040000 PTL 000F4240)
    [ 0.000000] ACPI: DSDT 3def61d1 03C6D (v01 PTLTD 755 06040000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 3defafc0 00040
    [ 0.000000] ACPI: SSDT 3def9eb2 000D6 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
    [ 0.000000] ACPI: APIC 3def9f88 00050 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 3def9fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 106MB HIGHMEM available.
    [ 0.000000] 883MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 373fe000
    [ 0.000000] low ram: 0 - 373fe000
    [ 0.000000] node 0 low ram: 00000000 - 373fe000
    [ 0.000000] node 0 bootmap 00009000 - 0000fe80
    [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
    [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    [ 0.000000] #3 [0001000000 - 00014c8bb4] TEXT DATA BSS ==> [0001000000 - 00014c8bb4]
    [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
    [ 0.000000] #5 [00014c9000 - 00014cf190] BRK ==> [00014c9000 - 00014cf190]
    [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    [ 0.000000] #7 [0000100000 - 000094f668] NEW RAMDISK ==> [0000100000 - 000094f668]
    [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
    [ 0.000000] found SMP MP-table at [c00f7fd0] f7fd0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000000 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000373fe
    [ 0.000000] HighMem 0x000373fe -> 0x0003def0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000000 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003def0
    [ 0.000000] On node 0 totalpages: 253583
    [ 0.000000] free_area_init_node: node 0, pgdat c13b08a0, node_mem_map c14d1000
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1736 pages used for memmap
    [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 214 pages used for memmap
    [ 0.000000] HighMem zone: 27164 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x8008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ11 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 24
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bff00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u4194304
    [ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251601
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=UUID=b2b271f0-0002-47e5-91fb-dc897e5ade90 ro ide_core.nohpa=0.0 libata.ignore_hpa=1
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Enabling fast FPU save and restore... done.
    [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
    [ 0.000000] Initializing CPU#0
    [ 0.000000] Initializing HighMem for node 0 (000373fe:0003def0)
    [ 0.000000] Memory: 991696k/1014720k available (2504k kernel code, 22280k reserved, 1313k data, 380k init, 109512k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
    [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
    [ 0.000000] .init : 0xc13bb000 - 0xc141a000 ( 380 kB)
    [ 0.000000] .data : 0xc1272001 - 0xc13ba4c0 (1313 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc1272001 (2504 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] NR_IRQS:1280
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1800.182 MHz processor.
    [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.36 BogoMIPS (lpj=7200728)
    [ 0.008085] Security Framework initialized
    [ 0.008121] SELinux: Disabled at boot.
    [ 0.008157] Mount-cache hash table entries: 512
    [ 0.008324] Initializing cgroup subsys ns
    [ 0.008355] Initializing cgroup subsys cpuacct
    [ 0.008387] Initializing cgroup subsys devices
    [ 0.008417] Initializing cgroup subsys freezer
    [ 0.008447] Initializing cgroup subsys net_cls
    [ 0.008499] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [ 0.008531] CPU: L2 Cache: 128K (64 bytes/line)
    [ 0.008563] mce: CPU supports 5 MCE banks
    [ 0.008612] Performance Events: AMD PMU driver.
    [ 0.008670] ... version: 0
    [ 0.008699] ... bit width: 48
    [ 0.008728] ... generic registers: 4
    [ 0.008757] ... value mask: 0000ffffffffffff
    [ 0.008787] ... max period: 00007fffffffffff
    [ 0.008817] ... fixed-purpose events: 0
    [ 0.008846] ... event mask: 000000000000000f
    [ 0.008877] Checking 'hlt' instruction... OK.
    [ 0.024358] SMP alternatives: switching to UP code
    [ 0.028273] Freeing SMP alternatives: 13k freed
    [ 0.028323] ACPI: Core revision 20090903
    [ 0.036090] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.040249] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.079962] CPU0: Mobile AMD Sempron(tm) Processor 3000+ stepping 02
    [ 0.084001] Brought up 1 CPUs
    [ 0.084001] Total of 1 processors activated (3600.36 BogoMIPS).
    [ 0.084001] CPU0 attaching NULL sched-domain.
    [ 0.084001] devtmpfs: initialized
    [ 0.084001] regulator: core version 0.5
    [ 0.084001] NET: Registered protocol family 16
    [ 0.084001] ACPI: bus type pci registered
    [ 0.084001] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
    [ 0.084001] PCI: Using configuration type 1 for base access
    [ 0.084001] bio: create slab <bio-0> at 0
    [ 0.084001] ACPI: EC: Look up EC in DSDT
    [ 0.096054] ACPI: Interpreter enabled
    [ 0.096091] ACPI: (supports S0 S3 S4 S5)
    [ 0.096229] ACPI: Using IOAPIC for interrupt routing
    [ 0.101725] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.101891] ACPI: No dock devices found.
    [ 0.102950] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 0.103028] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe1ffffff]
    [ 0.103125] pci 0000:00:02.0: Enabling SiS 96x SMBus
    [ 0.103183] pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f]
    [ 0.103210] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
    [ 0.103216] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
    [ 0.103222] pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
    [ 0.103227] pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
    [ 0.103233] pci 0000:00:02.5: reg 20 io port: [0x2000-0x200f]
    [ 0.103264] pci 0000:00:02.6: reg 10 io port: [0x1000-0x10ff]
    [ 0.103270] pci 0000:00:02.6: reg 14 io port: [0x1c00-0x1c7f]
    [ 0.103297] pci 0000:00:02.6: supports D1 D2
    [ 0.103300] pci 0000:00:02.6: PME# supported from D3hot D3cold
    [ 0.103332] pci 0000:00:02.6: PME# disabled
    [ 0.103386] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff]
    [ 0.103392] pci 0000:00:02.7: reg 14 io port: [0x1c80-0x1cff]
    [ 0.103419] pci 0000:00:02.7: supports D1 D2
    [ 0.103421] pci 0000:00:02.7: PME# supported from D3hot D3cold
    [ 0.103453] pci 0000:00:02.7: PME# disabled
    [ 0.103497] pci 0000:00:03.0: reg 10 32bit mmio: [0xe2002000-0xe2002fff]
    [ 0.103532] pci 0000:00:03.1: reg 10 32bit mmio: [0xe2003000-0xe2003fff]
    [ 0.103572] pci 0000:00:03.2: reg 10 32bit mmio: [0xe2004000-0xe2004fff]
    [ 0.103599] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
    [ 0.103631] pci 0000:00:03.2: PME# disabled
    [ 0.103686] pci 0000:00:04.0: reg 10 io port: [0x1800-0x18ff]
    [ 0.103692] pci 0000:00:04.0: reg 14 32bit mmio: [0xe2005000-0xe2005fff]
    [ 0.103710] pci 0000:00:04.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
    [ 0.103723] pci 0000:00:04.0: supports D1 D2
    [ 0.103725] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.103757] pci 0000:00:04.0: PME# disabled
    [ 0.103810] pci 0000:00:06.0: reg 10 32bit mmio: [0x000000-0x000fff]
    [ 0.103824] pci 0000:00:06.0: supports D1 D2
    [ 0.103827] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.103859] pci 0000:00:06.0: PME# disabled
    [ 0.103906] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe2000000-0xe2001fff]
    [ 0.104045] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
    [ 0.104050] pci 0000:01:00.0: reg 14 32bit mmio: [0xe2100000-0xe211ffff]
    [ 0.104055] pci 0000:01:00.0: reg 18 io port: [0xa000-0xa07f]
    [ 0.104070] pci 0000:01:00.0: supports D1 D2
    [ 0.104092] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
    [ 0.104096] pci 0000:00:01.0: bridge 32bit mmio: [0xe2100000-0xe21fffff]
    [ 0.104101] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
    [ 0.104119] pci_bus 0000:00: on NUMA node 0
    [ 0.104124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.111159] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
    [ 0.111498] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
    [ 0.111822] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
    [ 0.112161] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
    [ 0.112506] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
    [ 0.112830] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
    [ 0.113149] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
    [ 0.113519] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
    [ 0.113887] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.113922] vgaarb: loaded
    [ 0.114044] PCI: Using ACPI for IRQ routing
    [ 0.114247] Switching to clocksource tsc
    [ 0.115699] pnp: PnP ACPI init
    [ 0.115761] ACPI: bus type pnp registered
    [ 0.116000] pnp: PnP ACPI: found 8 devices
    [ 0.116000] ACPI: ACPI bus type pnp unregistered
    [ 0.116000] PnPBIOS: Disabled by ACPI PNP
    [ 0.116000] system 00:04: ioport range 0x8000-0x807f has been reserved
    [ 0.116000] system 00:04: ioport range 0x8080-0x80ff has been reserved
    [ 0.116000] system 00:04: ioport range 0x8100-0x811f has been reserved
    [ 0.116000] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
    [ 0.116000] system 00:04: ioport range 0x3f0-0x3f1 has been reserved
    [ 0.116000] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
    [ 0.116000] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
    [ 0.116000] system 00:04: iomem range 0xfee00000-0xfeefffff has been reserved
    [ 0.116000] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
    [ 0.116000] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
    [ 0.116000] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
    [ 0.116000] system 00:04: iomem range 0xfffe0000-0xfffeffff has been reserved
    [ 0.116004] system 00:04: iomem range 0xffff0000-0xffffffff has been reserved
    [ 0.150797] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    [ 0.150831] pci 0000:00:01.0: IO window: 0xa000-0xafff
    [ 0.150863] pci 0000:00:01.0: MEM window: 0xe2100000-0xe21fffff
    [ 0.150896] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
    [ 0.150930] pci 0000:00:06.0: CardBus bridge, secondary bus 0000:02
    [ 0.150961] pci 0000:00:06.0: IO window: 0x002400-0x0024ff
    [ 0.150992] pci 0000:00:06.0: IO window: 0x002800-0x0028ff
    [ 0.151024] pci 0000:00:06.0: PREFETCH window: 0x40000000-0x43ffffff
    [ 0.151056] pci 0000:00:06.0: MEM window: 0x44000000-0x47ffffff
    [ 0.151099] pci 0000:00:06.0: enabling device (0000 -> 0003)
    [ 0.151139] pci 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 0.151174] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    [ 0.151177] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [ 0.151181] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
    [ 0.151184] pci_bus 0000:01: resource 1 mem: [0xe2100000-0xe21fffff]
    [ 0.151187] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
    [ 0.151191] pci_bus 0000:02: resource 0 io: [0x2400-0x24ff]
    [ 0.151194] pci_bus 0000:02: resource 1 io: [0x2800-0x28ff]
    [ 0.151197] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
    [ 0.151201] pci_bus 0000:02: resource 3 mem: [0x44000000-0x47ffffff]
    [ 0.151241] NET: Registered protocol family 2
    [ 0.151368] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.151842] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.153096] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.153783] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.153816] TCP reno registered
    [ 0.153961] NET: Registered protocol family 1
    [ 0.582296] pci 0000:01:00.0: Boot video device
    [ 0.582357] Unpacking initramfs...
    [ 0.849451] Freeing initrd memory: 8509k freed
    [ 0.859652] Simple Boot Flag at 0x38 set to 0x1
    [ 0.859971] audit: initializing netlink socket (disabled)
    [ 0.860018] type=2000 audit(1322856932.857:1): initialized
    [ 0.863795] highmem bounce pool size: 64 pages
    [ 0.863831] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.865414] VFS: Disk quotas dquot_6.5.2
    [ 0.865522] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.865629] msgmni has been set to 1740
    [ 0.865922] alg: No test for stdrng (krng)
    [ 0.866023] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.866057] io scheduler noop registered
    [ 0.866087] io scheduler anticipatory registered
    [ 0.866116] io scheduler deadline registered
    [ 0.866182] io scheduler cfq registered (default)
    [ 0.866385] isapnp: Scanning for PnP cards...
    [ 1.219694] isapnp: No Plug & Play device found
    [ 1.221203] Linux agpgart interface v0.103
    [ 1.221289] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
    [ 1.222639] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
    [ 1.222768] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 1.223091] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.223126] serial 0000:00:02.6: PCI INT C disabled
    [ 1.223247] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.225482] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.225517] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.225660] mice: PS/2 mouse device common for all mice
    [ 1.225750] rtc_cmos 00:02: RTC can wake from S4
    [ 1.225820] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.225873] rtc0: alarms up to one year, y3k, 114 bytes nvram
    [ 1.225917] cpuidle: using governor ladder
    [ 1.225947] cpuidle: using governor menu
    [ 1.225979] No iBFT detected.
    [ 1.226412] TCP cubic registered
    [ 1.226591] NET: Registered protocol family 10
    [ 1.227452] Mobile IPv6
    [ 1.227482] NET: Registered protocol family 17
    [ 1.227533] Using IPI No-Shortcut mode
    [ 1.227667] PM: Resume from disk failed.
    [ 1.227685] registered taskstats version 1
    [ 1.227917] rtc_cmos 00:02: setting system clock to 2011-12-02 20:15:34 UTC (1322856934)
    [ 1.227980] Initalizing network drop monitor service
    [ 1.228042] Freeing unused kernel memory: 380k freed
    [ 1.228531] Write protecting the kernel text: 2508k
    [ 1.228614] Write protecting the kernel read-only data: 904k
    [ 1.250534] <30>udevd[47]: starting version 172
    [ 1.257017] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.454602] SCSI subsystem initialized
    [ 1.483818] sis900.c: v1.08.10 Apr. 2 2006
    [ 1.483897] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 1.488579] usbcore: registered new interface driver usbfs
    [ 1.488826] usbcore: registered new interface driver hub
    [ 1.489107] usbcore: registered new device driver usb
    [ 1.499745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.500124] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
    [ 1.505691] 0000:00:04.0: Using transceiver found at address 13 as default
    [ 1.532562] sisfb: Video ROM found
    [ 1.533330] sisfb: Video RAM at 0xe8000000, mapped to 0xf7e80000, size 32768k
    [ 1.533362] sisfb: MMIO at 0xe2100000, mapped to 0xf7e40000, size 128k
    [ 1.533393] sisfb: Memory heap starting at 32160K, size 32K
    [ 1.533439] sisfb: Detected SiS302LV video bridge
    [ 1.593962] sisfb: Detected 1024x768 flat panel
    [ 1.593966] sisfb: Detected LCD PDC1 0x00 (for LCD=CRT1)
    [ 1.672565] sisfb: CRT1 DDC supported
    [ 1.672595] sisfb: CRT1 DDC level: 2
    [ 1.826616] sisfb: Monitor range H 24-83KHz, V 50-76Hz, Max. dotclock 170MHz
    [ 1.826654] sisfb: Default mode is 1024x768x16 (75Hz)
    [ 1.826689] sisfb: Initial vbflags 0x8000012
    [ 1.827827] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 19, 00:16:36:04:cf:d6
    [ 1.827918] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [ 1.827974] ehci_hcd 0000:00:03.2: EHCI Host Controller
    [ 1.828061] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
    [ 1.828137] ehci_hcd 0000:00:03.2: cache line size of 64 is not supported
    [ 1.828156] ehci_hcd 0000:00:03.2: irq 23, io mem 0xe2004000
    [ 1.834823] libata version 3.00 loaded.
    [ 1.840046] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
    [ 1.840126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.840157] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.840191] usb usb1: Product: EHCI Host Controller
    [ 1.840221] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
    [ 1.840251] usb usb1: SerialNumber: 0000:00:03.2
    [ 1.840408] usb usb1: configuration #1 chosen from 1 choice
    [ 1.840473] hub 1-0:1.0: USB hub found
    [ 1.840512] hub 1-0:1.0: 6 ports detected
    [ 1.842024] pata_sis 0000:00:02.5: version 0.5.2
    [ 1.842051] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.853698] thermal LNXTHERM:01: registered as thermal_zone0
    [ 1.853743] ACPI: Thermal Zone [THRM] (58 C)
    [ 1.854095] scsi0 : pata_sis
    [ 1.855750] scsi1 : pata_sis
    [ 1.856030] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
    [ 1.856062] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
    [ 2.443778] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.443825] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 2.443850] ohci_hcd 0000:00:03.0: OHCI Host Controller
    [ 2.443868] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
    [ 2.443901] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000
    [ 2.446858] Console: switching to colour frame buffer device 128x48
    [ 2.449960] sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
    [ 2.449963] fb0: SiS 760 frame buffer device version 1.8.9
    [ 2.449965] sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
    [ 2.456176] ata1.00: HPA unlocked: 268435455 -> 312581808, native 312581808
    [ 2.456236] ata1.00: ATA-6: ST9160821A, 3.ALD, max UDMA/100
    [ 2.456276] ata1.00: 312581808 sectors, multi 16: LBA48
    [ 2.472313] ata1.00: configured for UDMA/100
    [ 2.472474] scsi 0:0:0:0: Direct-Access ATA ST9160821A 3.AL PQ: 0 ANSI: 5
    [ 2.496049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    [ 2.496104] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 2.496151] usb usb2: Product: OHCI Host Controller
    [ 2.496185] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
    [ 2.496225] usb usb2: SerialNumber: 0000:00:03.0
    [ 2.496369] usb usb2: configuration #1 chosen from 1 choice
    [ 2.496441] hub 2-0:1.0: USB hub found
    [ 2.496482] hub 2-0:1.0: 3 ports detected
    [ 2.496590] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 2.496664] ohci_hcd 0000:00:03.1: OHCI Host Controller
    [ 2.496781] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
    [ 2.496919] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000
    [ 2.552037] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [ 2.552154] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 2.552260] usb usb3: Product: OHCI Host Controller
    [ 2.552353] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
    [ 2.552452] usb usb3: SerialNumber: 0000:00:03.1
    [ 2.552763] usb usb3: configuration #1 chosen from 1 choice
    [ 2.552955] hub 3-0:1.0: USB hub found
    [ 2.553060] hub 3-0:1.0: 3 ports detected
    [ 2.636217] ata2.00: ATAPI: Slimtype DVDRW SOSW-833S, VRS2, max UDMA/33
    [ 2.652634] ata2.00: configured for UDMA/33
    [ 2.653637] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SOSW-833S VRS2 PQ: 0 ANSI: 5
    [ 2.672391] b43-pci-bridge 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 2.687256] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.687436] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.687531] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.687553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.687823] sda:
    [ 2.688774] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 2.689055] scsi 1:0:0:0: Attached scsi generic sg1 type 5
    [ 2.695426] sda1 sda2 sda3 sda4
    [ 2.708016] usb 1-4: new high speed USB device using ehci_hcd and address 3
    [ 2.725488] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.732116] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0b.0
    [ 2.840892] usb 1-4: New USB device found, idVendor=152d, idProduct=2338
    [ 2.841023] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
    [ 2.841130] usb 1-4: Product: USB to ATA/ATAPI bridge
    [ 2.841223] usb 1-4: Manufacturer: JMicron
    [ 2.841311] usb 1-4: SerialNumber: 000000000000
    [ 2.841534] usb 1-4: configuration #1 chosen from 1 choice
    [ 2.853634] Initializing USB Mass Storage driver...
    [ 2.854053] scsi2 : SCSI emulation for USB Mass Storage devices
    [ 2.854636] usbcore: registered new interface driver usb-storage
    [ 2.854783] USB Mass Storage support registered.
    [ 2.856747] usb-storage: device found at 3
    [ 2.856751] usb-storage: waiting for device to settle before scanning
    [ 3.016025] usb 2-2: new low speed USB device using ohci_hcd and address 2
    [ 3.239859] usb 2-2: New USB device found, idVendor=1a2c, idProduct=0002
    [ 3.239987] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 3.240097] usb 2-2: Product: USB Keykoard
    [ 3.240186] usb 2-2: Manufacturer: USB
    [ 3.240411] usb 2-2: configuration #1 chosen from 1 choice
    [ 3.260732] usbcore: registered new interface driver hiddev
    [ 3.267520] input: USB USB Keykoard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input1
    [ 3.268050] generic-usb 0003:1A2C:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:03.0-2/input0
    [ 7.856295] usb-storage: device scan complete
    [ 9.851963] scsi 2:0:0:0: Direct-Access ST950032 5AS PQ: 0 ANSI: 2 CCS
    [ 9.853597] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [ 12.560322] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 12.561190] sd 2:0:0:0: [sdb] Write Protect is off
    [ 12.561288] sd 2:0:0:0: [sdb] Mode Sense: 28 00 00 00
    [ 12.561291] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 12.562814] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 12.562936] sdb: sdb1
    [ 12.700712] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 12.700841] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 13.272670] /tmp/buildd/linux-2.6-2.6.32/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
    [ 13.272887] generic-usb 0003:1A2C:0002.0002: timeout initializing reports
    [ 13.273146] input: USB USB Keykoard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/input/input2
    [ 13.273346] generic-usb 0003:1A2C:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:03.0-2/input1
    [ 13.273567] usbcore: registered new interface driver usbhid
    [ 13.273666] usbhid: v2.6:USB HID core driver
    [ 13.506385] PM: Starting manual resume from disk
    [ 13.506508] PM: Resume from partition 8:4
    [ 13.506510] PM: Checking hibernation image.
    [ 13.508419] PM: Error -22 checking image file
    [ 13.508421] PM: Resume from disk failed.
    [ 13.721670] EXT4-fs (sda2): mounted filesystem with ordered data mode
    [ 15.294222] <30>udevd[266]: starting version 172
    [ 15.666363] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [ 15.669244] ACPI: Lid Switch [LID]
    [ 15.669462] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 15.669580] ACPI: Power Button [PWRB]
    [ 15.669743] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    [ 15.669858] ACPI: Sleep Button [SLPB]
    [ 15.670010] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [ 15.670118] ACPI: Power Button [PWRF]
    [ 15.767070] ACPI: Battery Slot [BAT1] (battery present)
    [ 15.768531] ACPI: AC Adapter [ACAD] (on-line)
    [ 15.801205] Marking TSC unstable due to TSC halts in idle
    [ 15.801476] processor LNXCPU:00: registered as cooling_device0
    [ 15.809072] Switching to clocksource acpi_pm
    [ 15.963087] yenta_cardbus 0000:00:06.0: CardBus bridge found [1025:0083]
    [ 15.963228] yenta_cardbus 0000:00:06.0: Using CSCINT to route CSC interrupts to PCI
    [ 15.963337] yenta_cardbus 0000:00:06.0: Routing CardBus interrupts to PCI
    [ 15.963442] yenta_cardbus 0000:00:06.0: TI: mfunc 0x00521d22, devctl 0x64
    [ 16.056224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 16.087536] ACPI: WMI: Mapper loaded
    [ 16.193069] yenta_cardbus 0000:00:06.0: ISA IRQ mask 0x06f8, PCI irq 19
    [ 16.193202] yenta_cardbus 0000:00:06.0: Socket status: 30000006
    [ 16.247795] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [ 16.250634] acer-wmi: Acer Laptop ACPI-WMI Extras
    [ 16.250761] acer-wmi: No or unsupported WMI interface, unable to load
    [ 16.448490] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
    [ 16.449426] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 16.563486] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
    [ 16.565348] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
    [ 16.566124] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    [ 16.566790] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    [ 16.567558] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    [ 16.655309] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0
    [ 16.690726] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 17.958951] Adding 1012084k swap on /dev/sda4. Priority:-1 extents:1 across:1012084k
    [ 18.447701] loop: module loaded
    [ 20.312617] kjournald starting. Commit interval 5 seconds
    [ 20.312884] EXT3 FS on sda1, internal journal
    [ 20.312985] EXT3-fs: mounted filesystem with ordered data mode.
    [ 20.508748] EXT4-fs (sda3): mounted filesystem with ordered data mode
    [ 22.648592] RPC: Registered udp transport module.
    [ 22.648710] RPC: Registered tcp transport module.
    [ 22.648801] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 22.716383] Slow work thread pool: Starting up
    [ 22.716559] Slow work thread pool: Ready
    [ 22.716738] FS-Cache: Loaded
    [ 22.830414] FS-Cache: Netfs 'nfs' registered for caching
    [ 22.872615] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [ 23.044914] eth0: Media Link On 100mbps full-duplex
    [ 30.438147] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 30.882421] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00)
    [ 30.882642] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
    [ 30.882769] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
    [ 30.882894] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13
    [ 30.933252] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 30.948879] NFSD: starting 90-second grace period
    [ 32.020370] eth0: no IPv6 routers present
    \
     
     \ /
      Last update: 2011-12-02 21:57    [W:0.061 / U:0.400 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site