Messages in this thread | | | Date | Thu, 15 Dec 2011 15:33:05 +0100 | From | Julian Sikorski <> | Subject | Re: bug report: irq 19: nobody cared (try booting with the "irqpoll" option) |
| |
W dniu 15.12.2011 15:30, Julian Sikorski pisze: > Hello list, > > this is happening every time I reboot from suspend on a Clevo P150HM > machine. It has been occuring for a while, but this report is for Fedora > kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16 x86_64 here). > Smolt profile is available here: > > http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6 > > I have the problem itself does not seem to manifest in anything else > except abrt complaining. The trace: > > irq 19: nobody cared (try booting with the "irqpoll" option) > Pid: 0, comm: swapper Not tainted 3.1.5-2.fc16.x86_64 #1 > Call Trace: > <IRQ> [<ffffffff810dc87d>] __report_bad_irq+0x3d/0xe0 > [<ffffffff810dcb3d>] note_interrupt+0x16d/0x220 > [<ffffffff8101a4f3>] ? native_sched_clock+0x13/0x80 > [<ffffffff810da8f9>] handle_irq_event_percpu+0xa9/0x220 > [<ffffffff810daab4>] handle_irq_event+0x44/0x70 > [<ffffffff810dd49f>] handle_fasteoi_irq+0x5f/0xf0 > [<ffffffff810151e9>] handle_irq+0x49/0xa0 > [<ffffffff815db6da>] do_IRQ+0x5a/0xe0 > [<ffffffff815d116e>] common_interrupt+0x6e/0x6e > <EOI> [<ffffffff8130179b>] ? intel_idle+0xcb/0x120 > [<ffffffff8130177d>] ? intel_idle+0xad/0x120 > [<ffffffff814803c6>] cpuidle_idle_call+0xc6/0x280 > [<ffffffff81012225>] cpu_idle+0xc5/0x120 > [<ffffffff815ab0ee>] rest_init+0x72/0x74 > [<ffffffff81b7ec0a>] start_kernel+0x3b5/0x3c0 > [<ffffffff81b7e347>] x86_64_start_reservations+0x132/0x136 > [<ffffffff81b7e140>] ? early_idt_handlers+0x140/0x140 > [<ffffffff81b7e44d>] x86_64_start_kernel+0x102/0x111 > > I am attaching the relevant part of /var/log/messages, please let me > know if other information is needed. Thank you for your help in advance. > > Regards, > Julian > > P.S. > Please keep me CCed, I am not subscribed. I was told that some other files might be useful. Please find attached the output of lspci -vvv and of /proc/interrupts
Julian 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000e8000000-00000000f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f650a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f6508000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 52 Region 0: Memory at f6500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f6400000-f64fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f6300000-f63fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f6200000-f62fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f6100000-f61fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f6507000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at f070 [size=8] Region 1: I/O ports at f060 [size=4] Region 2: I/O ports at f050 [size=8] Region 3: I/O ports at f040 [size=4] Region 4: I/O ports at f020 [size=32] Region 5: Memory at f6506000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f6505000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f000 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation Device 0e31 (rev a1) (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at f0000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at e000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb
01:00.1 Audio device: nVidia Corporation GF104 High Definition Audio Controller (rev a1) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel
02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 5102 Physical Slot: 1-1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 53 Region 0: Memory at f6320000 (32-bit, non-prefetchable) [size=16K] Region 2: I/O ports at d100 [size=128] Region 3: I/O ports at d000 [size=256] Region 4: Memory at f6310000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at f6300000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: jme Kernel modules: jme
03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 5102 Physical Slot: 1-1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at f6326000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01) Subsystem: CLEVO/KAPOK Computer Device 5102 Physical Slot: 1-1 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 0: Memory at f6325000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel modules: sdhci-pci
03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 5102 Physical Slot: 1-1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at f6324000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms
04:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) Subsystem: Intel Corporation Centrino Advanced-N 6230 AGN Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at f6200000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn Kernel modules: iwlagn
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI]) Subsystem: CLEVO/KAPOK Computer Device 5102 Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f6103000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f6102000 (32-bit, non-prefetchable) [size=128] Region 4: Memory at f6101000 (32-bit, non-prefetchable) [size=128] Region 5: Memory at f6100000 (32-bit, non-prefetchable) [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 129 0 0 0 0 0 0 0 IR-IO-APIC-edge timer 1: 3920 0 0 0 0 0 0 0 IR-IO-APIC-edge i8042 8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0 9: 1852 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi acpi 12: 34409 0 0 0 0 0 0 0 IR-IO-APIC-edge i8042 16: 31732 1442 5482 3558 0 0 0 0 IR-IO-APIC-fasteoi ehci_hcd:usb1, nouveau 17: 152 0 40 0 0 0 0 0 IR-IO-APIC-fasteoi snd_hda_intel 18: 0 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi jmb38x_ms:slot0, mmc0 19: 100008 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi firewire_ohci 23: 141 29 0 0 0 0 0 0 IR-IO-APIC-fasteoi ehci_hcd:usb2 40: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0 42: 23619 8738 14883 9851 0 0 0 0 IR-PCI-MSI-edge ahci 43: 1 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 44: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 45: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 46: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 47: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 48: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 49: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 50: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 51: 181759 0 0 0 0 0 0 0 IR-PCI-MSI-edge iwlagn 52: 352 0 0 0 0 0 0 0 IR-PCI-MSI-edge snd_hda_intel 53: 2 0 0 0 0 0 0 0 IR-PCI-MSI-edge p1p1 NMI: 36 112 51 21 167 30 18 10 Non-maskable interrupts LOC: 745620 286150 151131 63431 569325 158704 93468 45004 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 36 112 51 21 167 30 18 10 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RES: 395806 190268 69817 35327 341386 63276 31648 23782 Rescheduling interrupts CAL: 2594 4557 6003 6884 3868 8841 10965 11701 Function call interrupts TLB: 2847 2513 1853 4537 1537 2086 1148 1154 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 8 8 8 8 8 8 8 8 Machine check polls ERR: 0 MIS: 0
| |