lkml.org 
[lkml]   [2011]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] e100: power down PHY if WOL is not enabled
Date
Since the interface will not be used after being put down and WOL is disabled,
just power it off.
When bring up the interface, power on the PHY.

Signed-off-by: Jiang Wang <Jiang.Wang@riverbed.com>
---
drivers/net/ethernet/intel/e100.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 5a2fdf7..9824e0a 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1449,6 +1449,14 @@ static int e100_phy_init(struct nic *nic)
netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
"phy_addr = %d\n", nic->mii.phy_id);

+ /* Make sure power to the PHY is enabled */
+ if (!(nic->flags & wol_magic)) {
+ uint16_t phy_data;
+ phy_data = mdio_read(nic->netdev, nic->mii.phy_id, MII_BMCR);
+ phy_data &= ~BMCR_PDOWN;
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, phy_data);
+ }
+
/* Get phy ID */
id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
@@ -2261,6 +2269,15 @@ static void e100_down(struct nic *nic)
napi_disable(&nic->napi);
netif_stop_queue(nic->netdev);
e100_hw_reset(nic);
+
+ /* If wake on LAN is not enabled, power down the PHY */
+ if (!(nic->flags & wol_magic)) {
+ uint16_t phy_data;
+ phy_data = mdio_read(nic->netdev, nic->mii.phy_id, MII_BMCR);
+ phy_data |= BMCR_PDOWN;
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, phy_data);
+ }
+
free_irq(nic->pdev->irq, nic->netdev);
del_timer_sync(&nic->watchdog);
netif_carrier_off(nic->netdev);
--
1.7.1


\
 
 \ /
  Last update: 2011-12-14 20:33    [from the cache]
©2003-2011 Jasper Spaans