lkml.org 
[lkml]   [2011]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] USB: ISP1760: Add flags for interrupt polarity and edge/level trigger
Date
On Tuesday 13 December 2011 10:00:10 Greg KH wrote:
> On Tue, Dec 13, 2011 at 10:33:13AM +0100, Alexander Stein wrote:
> > Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
> > ---
> >
> > drivers/usb/host/isp1760-if.c | 4 ++++
> > include/linux/usb/isp1760.h | 2 ++
> > 2 files changed, 6 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/usb/host/isp1760-if.c
> > b/drivers/usb/host/isp1760-if.c index a7dc1e1..0ef9867 100644
> > --- a/drivers/usb/host/isp1760-if.c
> > +++ b/drivers/usb/host/isp1760-if.c
> > @@ -388,6 +388,10 @@ static int __devinit isp1760_plat_probe(struct
> > platform_device *pdev)>
> > devflags |= ISP1760_FLAG_DACK_POL_HIGH;
> >
> > if (priv->dreq_polarity_high)
> >
> > devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
> >
> > + if (priv->interrupt_polarity_high)
> > + devflags |= ISP1760_FLAG_INTR_POL_HIGH;
> > + if (priv->interrupt_edge_triggered)
> > + devflags |= ISP1760_FLAG_INTR_EDGE_TRIG;
> >
> > }
> >
> > hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
> >
> > diff --git a/include/linux/usb/isp1760.h b/include/linux/usb/isp1760.h
> > index de7de53..c5edbc8 100644
> > --- a/include/linux/usb/isp1760.h
> > +++ b/include/linux/usb/isp1760.h
> > @@ -13,6 +13,8 @@ struct isp1760_platform_data {
> >
> > unsigned analog_oc:1; /* Analog overcurrent */
> > unsigned dack_polarity_high:1; /* DACK active high */
> > unsigned dreq_polarity_high:1; /* DREQ active high */
> >
> > + unsigned interrupt_polarity_high:1;
> > + unsigned interrupt_edge_triggered:1;
>
> So you added these, and you check them, but who sets them? What is the
> point of this patch at this point in time?

These platform data bits are set by board configurations, which is completly
optional. So currently maybe noone sets/use it, but in future someone may need
it. Also dreq_polarity_high is also there and I only found board files setting
them to 0... So why not add the feature bits too?

Regards,
Alexander



\
 
 \ /
  Last update: 2011-12-14 08:59    [W:0.085 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site