lkml.org 
[lkml]   [2011]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 1/2] leds: bd2802: Use gpio_request_one()
From
Date
Use gpio_request_one() instead of multiple gpiolib calls.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/leds/leds-bd2802.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 10e40971..591cbdf 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -688,8 +688,7 @@ static int __devinit bd2802_probe(struct i2c_client *client,
i2c_set_clientdata(client, led);

/* Configure RESET GPIO (L: RESET, H: RESET cancel) */
- gpio_request(pdata->reset_gpio, "RGB_RESETB");
- gpio_direction_output(pdata->reset_gpio, 1);
+ gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB");

/* Tacss = min 0.1ms */
udelay(100);
--
1.7.5.4




\
 
 \ /
  Last update: 2011-12-01 09:39    [W:0.047 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site