lkml.org 
[lkml]   [2011]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH -v2] pciehp: Retrieve link speed after link is trained

During hot plug, board_added will call pciehp_power_on_slot().
But link speed is updated in pciehp_power_on_slot().

We should not update link speed there, because that is too early.

Move updating to pciehp_check_link_status() after making sure link is trained.

-v2: compiling warning that Kenji found.

Signed-off-by: Yinghai Lu <yinghai.lu@oracle.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>

---
drivers/pci/hotplug/pciehp_hpc.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)

Index: linux-2.6/drivers/pci/hotplug/pciehp_hpc.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/pciehp_hpc.c
+++ linux-2.6/drivers/pci/hotplug/pciehp_hpc.c
@@ -294,6 +294,8 @@ int pciehp_check_link_status(struct cont
return retval;
}

+ pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
return retval;
}

@@ -484,7 +486,6 @@ int pciehp_power_on_slot(struct slot * s
u16 slot_cmd;
u16 cmd_mask;
u16 slot_status;
- u16 lnk_status;
int retval = 0;

/* Clear sticky power-fault bit from previous power failures */
@@ -516,14 +517,6 @@ int pciehp_power_on_slot(struct slot * s
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);

- retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
- if (retval) {
- ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
- __func__);
- return retval;
- }
- pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
-
return retval;
}


\
 
 \ /
  Last update: 2011-11-07 16:57    [W:0.052 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site