lkml.org 
[lkml]   [2011]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH] PNP ACPI: Use real gsi
    Date
    From: Yinghai Lu <yinghai@kernel.org>

    In 2.6.35 a lot cleanups in this area (not pnp, but x86 ioapic setup) have
    been introduced.
    On an IBM Xseries (x3850) this caused the machine to freeze around when
    the init userspace process is tried to get started.
    The reason is that the timer interrupt is not set up correctly on this machine.

    I could bisect the issue to one of ioapic cleanups introduced in 2.6.35:
    commit a4384df3e24579d6292a1b3b41d500349948f30b

    While on this machine the problem was an interrupt timer issue,
    there may be other platforms with different interrupt issues relatd to this
    problem. Kernel logs with similar IOAPIC errors inside pnpacpi setup might
    need this patch:
    pnp 00:04: [io 0x02f8-0x02ff]
    IOAPIC[1]: Invalid reference to IRQ 0
    pnp 00:04: [irq 2]
    pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)

    Yinghai came up with this patch which fixes the problem for me.
    Looks like the bisected commit is correct, but the pnp layer has been
    overseen.

    Tested-by: Thomas Renninger <trenn@suse.de>
    CC: Eric W. Biederman <ebiederm@xmission.com>
    CC: bjorn.helgaas@hp.com
    CC: lenb@kernel.org
    CC: stable@kernel.org
    CC: Ingo Molnar <mingo@elte.hu>
    CC: H Peter Anvin <hpa@zytor.com>
    CC: Thomas Gleixner <tglx@linutronix.de>
    Signed-off-by: Thomas Renninger <trenn@suse.de>
    ---
    drivers/pnp/pnpacpi/rsparser.c | 8 ++++++++
    1 files changed, 8 insertions(+), 0 deletions(-)

    diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
    index bbf3edd..dad5da9 100644
    --- a/drivers/pnp/pnpacpi/rsparser.c
    +++ b/drivers/pnp/pnpacpi/rsparser.c
    @@ -106,6 +106,14 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
    return;
    }

    +#ifdef CONFIG_X86_IO_APIC
    + /*
    + * Convert it back to real gsi
    + */
    + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
    + acpi_isa_irq_to_gsi(gsi, &gsi);
    +#endif
    +
    /*
    * in IO-APIC mode, use overrided attribute. Two reasons:
    * 1. BIOS bug in DSDT
    --
    1.7.6.1


    \
     
     \ /
      Last update: 2011-11-04 03:15    [W:0.019 / U:32.608 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site