[lkml]   [2011]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [lm-sensors] Hardware running hot and without the fan
On Thu, 3 Nov 2011 08:06:41 -0700, Guenter Roeck wrote:
> You should be able to set the fan speed by writing into the fanX_input
> and/or fanX_output sysfs attributes. You find those
> in /sys/class/hwmon/hwmon0/device (assuming there is only one hwmon
> device).

Note that fanX_input is always a read-only file, so writing to it isn't
going to do anything.

fanX_output is not a standard attribute for hwmon devices, it shouldn't
be there in the first place... The applesmc driver doesn't see to
follow the standard interface, so it's probably best to not assume too

Jean Delvare

 \ /
  Last update: 2011-11-03 17:41    [W:0.073 / U:15.092 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site