lkml.org 
[lkml]   [2011]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Linux 3.1.3
diff --git a/Makefile b/Makefile
index c992cca..d614254 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 1
-SUBLEVEL = 2
+SUBLEVEL = 3
EXTRAVERSION =
NAME = "Divemaster Edition"

diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 742b610..fed957a 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -356,7 +356,7 @@ __secondary_data:
* r13 = *virtual* address to jump to upon completion
*/
__enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 00ff00d..123d72a 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -47,7 +47,7 @@ struct sca_block {
#define KVM_HPAGE_MASK(x) (~(KVM_HPAGE_SIZE(x) - 1))
#define KVM_PAGES_PER_HPAGE(x) (KVM_HPAGE_SIZE(x) / PAGE_SIZE)

-#define CPUSTAT_HOST 0x80000000
+#define CPUSTAT_STOPPED 0x80000000
#define CPUSTAT_WAIT 0x10000000
#define CPUSTAT_ECALL_PEND 0x08000000
#define CPUSTAT_STOP_INT 0x04000000
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index 9e4c841..5a5c084 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -42,7 +42,7 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu)
return -EOPNOTSUPP;
}

- atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+ atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM;
vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL;
vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index c7c5189..0243454 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -132,7 +132,6 @@ static int handle_stop(struct kvm_vcpu *vcpu)
int rc = 0;

vcpu->stat.exit_stop_request++;
- atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
spin_lock_bh(&vcpu->arch.local_int.lock);
if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) {
vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP;
@@ -149,6 +148,8 @@ static int handle_stop(struct kvm_vcpu *vcpu)
}

if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
+ atomic_set_mask(CPUSTAT_STOPPED,
+ &vcpu->arch.sie_block->cpuflags);
vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
rc = -EOPNOTSUPP;
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index c9aeb4b..d4bd4c7 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -224,6 +224,7 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
offsetof(struct _lowcore, restart_psw), sizeof(psw_t));
if (rc == -EFAULT)
exception = 1;
+ atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
break;

case KVM_S390_PROGRAM_INT:
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0cba935..8cdb1bd 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -265,10 +265,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
restore_fp_regs(&vcpu->arch.guest_fpregs);
restore_access_regs(vcpu->arch.guest_acrs);
gmap_enable(vcpu->arch.gmap);
+ atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
}

void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
+ atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
gmap_disable(vcpu->arch.gmap);
save_fp_regs(&vcpu->arch.guest_fpregs);
save_access_regs(vcpu->arch.guest_acrs);
@@ -296,7 +298,9 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)

int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
{
- atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM);
+ atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH |
+ CPUSTAT_SM |
+ CPUSTAT_STOPPED);
vcpu->arch.sie_block->ecb = 6;
vcpu->arch.sie_block->eca = 0xC1002001U;
vcpu->arch.sie_block->fac = (int) (long) facilities;
@@ -421,7 +425,7 @@ static int kvm_arch_vcpu_ioctl_set_initial_psw(struct kvm_vcpu *vcpu, psw_t psw)
{
int rc = 0;

- if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
+ if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED))
rc = -EBUSY;
else {
vcpu->run->psw_mask = psw.mask;
@@ -494,7 +498,7 @@ rerun_vcpu:
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);

- atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+ atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);

BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL);

diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index d6a50c1..2a129bf 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -57,8 +57,8 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
spin_lock(&fi->lock);
if (fi->local_int[cpu_addr] == NULL)
rc = 3; /* not operational */
- else if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
- & CPUSTAT_RUNNING) {
+ else if (!(atomic_read(fi->local_int[cpu_addr]->cpuflags)
+ & CPUSTAT_STOPPED)) {
*reg &= 0xffffffff00000000UL;
rc = 1; /* status stored */
} else {
@@ -212,7 +212,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,

spin_lock_bh(&li->lock);
/* cpu must be in stopped state */
- if (atomic_read(li->cpuflags) & CPUSTAT_RUNNING) {
+ if (!(atomic_read(li->cpuflags) & CPUSTAT_STOPPED)) {
rc = 1; /* incorrect state */
*reg &= SIGP_STAT_INCORRECT_STATE;
kfree(inti);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index bc8729d..78445f4 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -22,6 +22,7 @@
#include <linux/kallsyms.h>
#include <linux/mutex.h>
#include <linux/async.h>
+#include <linux/pm_runtime.h>

#include "base.h"
#include "power/power.h"
@@ -1742,6 +1743,8 @@ void device_shutdown(void)
*/
list_del_init(&dev->kobj.entry);
spin_unlock(&devices_kset->list_lock);
+ /* Disable all device's runtime power management */
+ pm_runtime_disable(dev);

if (dev->bus && dev->bus->shutdown) {
dev_dbg(dev, "shutdown\n");
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 793f796..5693ece 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -127,12 +127,13 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
nid, K(node_page_state(nid, NR_WRITEBACK)),
nid, K(node_page_state(nid, NR_FILE_PAGES)),
nid, K(node_page_state(nid, NR_FILE_MAPPED)),
- nid, K(node_page_state(nid, NR_ANON_PAGES)
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+ nid, K(node_page_state(nid, NR_ANON_PAGES)
+ node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
- HPAGE_PMD_NR
+ HPAGE_PMD_NR),
+#else
+ nid, K(node_page_state(nid, NR_ANON_PAGES)),
#endif
- ),
nid, K(node_page_state(nid, NR_SHMEM)),
nid, node_page_state(nid, NR_KERNEL_STACK) *
THREAD_SIZE / 1024,
@@ -143,13 +144,14 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) +
node_page_state(nid, NR_SLAB_UNRECLAIMABLE)),
nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)),
- nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+ nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
, nid,
K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
- HPAGE_PMD_NR)
+ HPAGE_PMD_NR));
+#else
+ nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)));
#endif
- );
n += hugetlb_report_node_meminfo(nid, buf + n);
return n;
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 542453f..90587de 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2554,10 +2554,18 @@
#define _CURBBASE 0x700c4
#define _CURBPOS 0x700c8

+#define _CURBCNTR_IVB 0x71080
+#define _CURBBASE_IVB 0x71084
+#define _CURBPOS_IVB 0x71088
+
#define CURCNTR(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR)
#define CURBASE(pipe) _PIPE(pipe, _CURABASE, _CURBBASE)
#define CURPOS(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS)

+#define CURCNTR_IVB(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR_IVB)
+#define CURBASE_IVB(pipe) _PIPE(pipe, _CURABASE, _CURBBASE_IVB)
+#define CURPOS_IVB(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS_IVB)
+
/* Display A control */
#define _DSPACNTR 0x70180
#define DISPLAY_PLANE_ENABLE (1<<31)
@@ -3167,6 +3175,7 @@
#define FDI_LINK_TRAIN_NONE_IVB (3<<8)

/* both Tx and Rx */
+#define FDI_COMPOSITE_SYNC (1<<11)
#define FDI_LINK_TRAIN_AUTO (1<<10)
#define FDI_SCRAMBLING_ENABLE (0<<7)
#define FDI_SCRAMBLING_DISABLE (1<<7)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 04411ad..e1340a2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2600,6 +2600,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+ temp |= FDI_COMPOSITE_SYNC;
I915_WRITE(reg, temp | FDI_TX_ENABLE);

reg = FDI_RX_CTL(pipe);
@@ -2607,6 +2608,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
temp &= ~FDI_LINK_TRAIN_AUTO;
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ temp |= FDI_COMPOSITE_SYNC;
I915_WRITE(reg, temp | FDI_RX_ENABLE);

POSTING_READ(reg);
@@ -5758,6 +5760,31 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
I915_WRITE(CURBASE(pipe), base);
}

+static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ bool visible = base != 0;
+
+ if (intel_crtc->cursor_visible != visible) {
+ uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
+ if (base) {
+ cntl &= ~CURSOR_MODE;
+ cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ } else {
+ cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+ cntl |= CURSOR_MODE_DISABLE;
+ }
+ I915_WRITE(CURCNTR_IVB(pipe), cntl);
+
+ intel_crtc->cursor_visible = visible;
+ }
+ /* and commit changes on next vblank */
+ I915_WRITE(CURBASE_IVB(pipe), base);
+}
+
/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
static void intel_crtc_update_cursor(struct drm_crtc *crtc,
bool on)
@@ -5805,11 +5832,16 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
if (!visible && !intel_crtc->cursor_visible)
return;

- I915_WRITE(CURPOS(pipe), pos);
- if (IS_845G(dev) || IS_I865G(dev))
- i845_update_cursor(crtc, base);
- else
- i9xx_update_cursor(crtc, base);
+ if (IS_IVYBRIDGE(dev)) {
+ I915_WRITE(CURPOS_IVB(pipe), pos);
+ ivb_update_cursor(crtc, base);
+ } else {
+ I915_WRITE(CURPOS(pipe), pos);
+ if (IS_845G(dev) || IS_I865G(dev))
+ i845_update_cursor(crtc, base);
+ else
+ i9xx_update_cursor(crtc, base);
+ }

if (visible)
intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index 69822a4..c713691 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -203,6 +203,66 @@ struct saa7164_board saa7164_boards[] = {
.i2c_reg_len = REGLEN_8bit,
} },
},
+ [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+ .name = "Hauppauge WinTV-HVR2200",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .portc = SAA7164_MPEG_ENCODER,
+ .portd = SAA7164_MPEG_ENCODER,
+ .porte = SAA7164_MPEG_VBI,
+ .portf = SAA7164_MPEG_VBI,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x1d,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x05,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1b,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1c,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1e,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x10 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1f,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x12 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ } },
+ },
[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
.name = "Hauppauge WinTV-HVR2250",
.porta = SAA7164_MPEG_DVB,
@@ -426,6 +486,10 @@ struct saa7164_subid saa7164_subids[] = {
.subvendor = 0x0070,
.subdevice = 0x8851,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x8940,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
},
};
const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -469,6 +533,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -549,6 +614,7 @@ void saa7164_card_setup(struct saa7164_dev *dev)
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index f65eab6..d377937 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -475,6 +475,7 @@ int saa7164_dvb_register(struct saa7164_port *port)
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
i2c_bus = &dev->i2c_bus[port->nr + 1];
switch (port->nr) {
case 0:
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 6678bf1..35b6430 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -82,6 +82,7 @@
#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9

#define SAA7164_MAX_UNITS 8
#define SAA7164_TS_NUMBER_OF_LINES 312
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 2d6423c..8563e9a 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -472,7 +472,7 @@ config BMP085
module will be called bmp085.

config PCH_PHUB
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
depends on PCI
help
This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -480,12 +480,13 @@ config PCH_PHUB
processor. The Topcliff has MAC address and Option ROM data in SROM.
This driver can access MAC address and Option ROM data in SROM.

- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for LAPIS Semiconductor's IOH,
+ ML7213/ML7223/ML7831.
+ ML7213 which is for IVI(In-Vehicle Infotainment) use.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.

To compile this driver as a module, choose M here: the module will
be called pch_phub.
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 0fd7e77..ba276ba 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -73,6 +73,9 @@
#define PCI_DEVICE_ID_ROHM_ML7223_mPHUB 0x8012 /* for Bus-m */
#define PCI_DEVICE_ID_ROHM_ML7223_nPHUB 0x8002 /* for Bus-n */

+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801
+
/* SROM ACCESS Macro */
#define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))

@@ -464,7 +467,7 @@ static int pch_phub_write_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data)
int retval;
int i;

- if (chip->ioh_type == 1) /* EG20T */
+ if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/
retval = pch_phub_gbe_serial_rom_conf(chip);
else /* ML7223 */
retval = pch_phub_gbe_serial_rom_conf_mp(chip);
@@ -757,6 +760,22 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
chip->pch_opt_rom_start_address =\
PCH_PHUB_ROM_START_ADDR_ML7223;
chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
+ } else if (id->driver_data == 5) { /* ML7831 */
+ retval = sysfs_create_file(&pdev->dev.kobj,
+ &dev_attr_pch_mac.attr);
+ if (retval)
+ goto err_sysfs_create;
+
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+ if (retval)
+ goto exit_bin_attr;
+
+ /* set the prefech value */
+ iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+ /* set the interrupt delay value */
+ iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+ chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
+ chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;
}

chip->ioh_type = id->driver_data;
@@ -841,6 +860,7 @@ static struct pci_device_id pch_phub_pcidev_id[] = {
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4, },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5, },
{ }
};
MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index cfbddbe..43d073b 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -903,6 +903,6 @@ static void __exit spear_pcie_gadget_exit(void)
}
module_exit(spear_pcie_gadget_exit);

-MODULE_ALIAS("pcie-gadget-spear");
+MODULE_ALIAS("platform:pcie-gadget-spear");
MODULE_AUTHOR("Pratyush Anand");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index e0286cf..7be8b05 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -999,6 +999,7 @@ static int if_spi_host_to_card(struct lbs_private *priv,
spin_unlock_irqrestore(&card->buffer_lock, flags);
break;
default:
+ kfree(packet);
netdev_err(priv->dev, "can't transfer buffer of type %d\n",
type);
err = -EINVAL;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index f82bfeb..0415e47 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -923,6 +923,7 @@ struct rt2x00_dev {
* Powersaving work
*/
struct delayed_work autowakeup_work;
+ struct work_struct sleep_work;

/*
* Data queue arrays for RX, TX, Beacon and ATIM.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 0955c94..9d05f87 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -449,6 +449,23 @@ static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
return NULL;
}

+static void rt2x00lib_sleep(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, sleep_work);
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Check again is powersaving is enabled, to prevent races from delayed
+ * work execution.
+ */
+ if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+ rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+ IEEE80211_CONF_CHANGE_PS);
+}
+
static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct rxdone_entry_desc *rxdesc)
@@ -496,8 +513,7 @@ static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
cam |= (tim_ie->bitmap_ctrl & 0x01);

if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
- rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
- IEEE80211_CONF_CHANGE_PS);
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
}

static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
@@ -1121,6 +1137,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)

INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
+ INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);

/*
* Let the driver probe the device to detect the capabilities.
@@ -1177,6 +1194,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
*/
cancel_work_sync(&rt2x00dev->intf_work);
cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+ cancel_work_sync(&rt2x00dev->sleep_work);
if (rt2x00_is_usb(rt2x00dev)) {
del_timer_sync(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 3382475..c7b6fed 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -38,6 +38,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
@@ -1108,6 +1109,9 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
unique_id++;
}

+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
error = pci_enable_device(pdev);
if (error)
goto out;
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 8c713d3..418ce83 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -3887,6 +3888,10 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h)
dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
return -ENODEV;
}
+
+ pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
err = pci_enable_device(h->pdev);
if (err) {
dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 72273a0..b3c6d95 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -319,11 +319,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
return sdev;

out_device_destroy:
- scsi_device_set_state(sdev, SDEV_DEL);
- transport_destroy_device(&sdev->sdev_gendev);
- put_device(&sdev->sdev_dev);
- scsi_free_queue(sdev->request_queue);
- put_device(&sdev->sdev_gendev);
+ __scsi_remove_device(sdev);
out:
if (display_failure_msg)
printk(ALLOC_FAILURE_MSG, __func__);
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 435f6fa..44fbeba 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -46,6 +46,7 @@ static inline char __dcc_getchar(void)

asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
: "=r" (__c));
+ isb();

return __c;
}
@@ -55,6 +56,7 @@ static inline void __dcc_putchar(char c)
asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
: /* no output register */
: "r" (c));
+ isb();
}

static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4dcb37b..abf6fa4 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1570,7 +1570,7 @@ config SERIAL_IFX6X60
Support for the IFX6x60 modem devices on Intel MID platforms.

config SERIAL_PCH_UART
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
depends on PCI
select SERIAL_CORE
help
@@ -1578,12 +1578,12 @@ config SERIAL_PCH_UART
which is an IOH(Input/Output Hub) for x86 embedded processor.
Enabling PCH_DMA, this PCH UART works as DMA mode.

- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7213, ML7223 and ML7831.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+ for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.

config SERIAL_MSM_SMD
bool "Enable tty device interface for some SMD ports"
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index b46218d..f913ed0 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -256,6 +256,8 @@ enum pch_uart_num_t {
pch_ml7213_uart2,
pch_ml7223_uart0,
pch_ml7223_uart1,
+ pch_ml7831_uart0,
+ pch_ml7831_uart1,
};

static struct pch_uart_driver_data drv_dat[] = {
@@ -268,6 +270,8 @@ static struct pch_uart_driver_data drv_dat[] = {
[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
[pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
[pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
+ [pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
+ [pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
};

static unsigned int default_baud = 9600;
@@ -626,6 +630,7 @@ static void pch_request_dma(struct uart_port *port)
dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
__func__);
dma_release_channel(priv->chan_tx);
+ priv->chan_tx = NULL;
return;
}

@@ -1213,8 +1218,7 @@ static void pch_uart_shutdown(struct uart_port *port)
dev_err(priv->port.dev,
"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);

- if (priv->use_dma_flag)
- pch_free_dma(port);
+ pch_free_dma(port);

free_irq(priv->port.irq, priv);
}
@@ -1278,6 +1282,7 @@ static void pch_uart_set_termios(struct uart_port *port,
if (rtn)
goto out;

+ pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -1550,6 +1555,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
.driver_data = pch_ml7223_uart0},
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
.driver_data = pch_ml7223_uart1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
+ .driver_data = pch_ml7831_uart0},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
+ .driver_data = pch_ml7831_uart1},
{0,},
};

diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index ef925d5..a76c808 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -36,6 +36,7 @@

#include <linux/kmod.h>
#include <linux/nsproxy.h>
+#include <linux/ratelimit.h>

/*
* This guards the refcounted line discipline lists. The lock
@@ -548,15 +549,16 @@ static void tty_ldisc_flush_works(struct tty_struct *tty)
/**
* tty_ldisc_wait_idle - wait for the ldisc to become idle
* @tty: tty to wait for
+ * @timeout: for how long to wait at most
*
* Wait for the line discipline to become idle. The discipline must
* have been halted for this to guarantee it remains idle.
*/
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
+static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
{
- int ret;
+ long ret;
ret = wait_event_timeout(tty_ldisc_idle,
- atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+ atomic_read(&tty->ldisc->users) == 1, timeout);
if (ret < 0)
return ret;
return ret > 0 ? 0 : -EBUSY;
@@ -666,7 +668,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)

tty_ldisc_flush_works(tty);

- retval = tty_ldisc_wait_idle(tty);
+ retval = tty_ldisc_wait_idle(tty, 5 * HZ);

tty_lock();
mutex_lock(&tty->ldisc_mutex);
@@ -763,8 +765,6 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
if (IS_ERR(ld))
return -1;

- WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
-
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
@@ -839,7 +839,7 @@ void tty_ldisc_hangup(struct tty_struct *tty)
tty_unlock();
cancel_work_sync(&tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
-
+retry:
tty_lock();
mutex_lock(&tty->ldisc_mutex);

@@ -848,6 +848,22 @@ void tty_ldisc_hangup(struct tty_struct *tty)
it means auditing a lot of other paths so this is
a FIXME */
if (tty->ldisc) { /* Not yet closed */
+ if (atomic_read(&tty->ldisc->users) != 1) {
+ char cur_n[TASK_COMM_LEN], tty_n[64];
+ long timeout = 3 * HZ;
+ tty_unlock();
+
+ while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
+ timeout = MAX_SCHEDULE_TIMEOUT;
+ printk_ratelimited(KERN_WARNING
+ "%s: waiting (%s) for %s took too long, but we keep waiting...\n",
+ __func__, get_task_comm(cur_n, current),
+ tty_name(tty, tty_n));
+ }
+ mutex_unlock(&tty->ldisc_mutex);
+ goto retry;
+ }
+
if (reset == 0) {

if (!tty_ldisc_reinit(tty, tty->termios->c_line))
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 5112f57..2ffcaa0 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -539,7 +539,6 @@ static void acm_port_down(struct acm *acm)
{
int i;

- mutex_lock(&open_mutex);
if (acm->dev) {
usb_autopm_get_interface(acm->control);
acm_set_control(acm, acm->ctrlout = 0);
@@ -551,14 +550,15 @@ static void acm_port_down(struct acm *acm)
acm->control->needs_remote_wakeup = 0;
usb_autopm_put_interface(acm->control);
}
- mutex_unlock(&open_mutex);
}

static void acm_tty_hangup(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
tty_port_hangup(&acm->port);
+ mutex_lock(&open_mutex);
acm_port_down(acm);
+ mutex_unlock(&open_mutex);
}

static void acm_tty_close(struct tty_struct *tty, struct file *filp)
@@ -569,8 +569,9 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
shutdown */
if (!acm)
return;
+
+ mutex_lock(&open_mutex);
if (tty_port_close_start(&acm->port, tty, filp) == 0) {
- mutex_lock(&open_mutex);
if (!acm->dev) {
tty_port_tty_set(&acm->port, NULL);
acm_tty_unregister(acm);
@@ -582,6 +583,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
acm_port_down(acm);
tty_port_close_end(&acm->port, tty);
tty_port_tty_set(&acm->port, NULL);
+ mutex_unlock(&open_mutex);
}

static int acm_tty_write(struct tty_struct *tty,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a428aa0..210e359 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
USB_PORT_FEAT_C_PORT_LINK_STATE);
}

+ if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+ hub_is_superspeed(hub->hdev)) {
+ need_debounce_delay = true;
+ clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_BH_PORT_RESET);
+ }
/* We can forget about a "removed" device when there's a
* physical disconnect or the connect status changes.
*/
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index d6a8d82..ecf12e1 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -50,15 +50,42 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Logitech Webcam B/C500 */
{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },

+ /* Logitech Webcam C600 */
+ { USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech Webcam Pro 9000 */
{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },

+ /* Logitech Webcam C905 */
+ { USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C210 */
+ { USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C260 */
+ { USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech Webcam C310 */
{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },

+ /* Logitech Webcam C910 */
+ { USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Webcam C160 */
+ { USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech Webcam C270 */
{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },

+ /* Logitech Quickcam Pro 9000 */
+ { USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Quickcam E3500 */
+ { USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
+
+ /* Logitech Quickcam Vision Pro */
+ { USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech Harmony 700-series */
{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5a084b9..6f50491 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -442,7 +442,7 @@ config USB_LANGWELL
gadget drivers to also be dynamically linked.

config USB_EG20T
- tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
+ tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
depends on PCI
select USB_GADGET_DUALSPEED
help
@@ -458,10 +458,11 @@ config USB_EG20T
This driver dose not support interrupt transfer or isochronous
transfer modes.

- This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+ This driver also can be used for LAPIS Semiconductor's ML7213 which is
for IVI(In-Vehicle Infotainment) use.
- ML7213 is companion chip for Intel Atom E6xx series.
- ML7213 is completely compatible for Intel EG20T PCH.
+ ML7831 is for general purpose use.
+ ML7213/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7831 is completely compatible for Intel EG20T PCH.

config USB_CI13XXX_MSM
tristate "MIPS USB CI13xxx for MSM"
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index f96615a..06c40b1 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -363,6 +363,7 @@ struct pch_udc_dev {
#define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808
#define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D
+#define PCI_DEVICE_ID_ML7831_IOH_UDC 0x8808

static const char ep0_string[] = "ep0in";
static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */
@@ -2979,6 +2980,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
.class_mask = 0xffffffff,
},
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
+ .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class_mask = 0xffffffff,
+ },
{ 0 },
};

diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 29bec34..afef3df 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1480,10 +1480,15 @@ iso_stream_schedule (

/* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */

- /* find a uframe slot with enough bandwidth */
- next = start + period;
- for (; start < next; start++) {
-
+ /* find a uframe slot with enough bandwidth.
+ * Early uframes are more precious because full-speed
+ * iso IN transfers can't use late uframes,
+ * and therefore they should be allocated last.
+ */
+ next = start;
+ start += period;
+ do {
+ start--;
/* check schedule: enough space? */
if (stream->highspeed) {
if (itd_slot_ok(ehci, mod, start,
@@ -1496,7 +1501,7 @@ iso_stream_schedule (
start, sched, period))
break;
}
- }
+ } while (start > next);

/* no room in the schedule */
if (start == next) {
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 629a968..a495d48 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -626,7 +626,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
void __iomem *base, *op_reg_base;
u32 hcc_params, cap, val;
u8 offset, cap_length;
- int wait_time, delta, count = 256/4;
+ int wait_time, count = 256/4;

if (!mmio_resource_enabled(pdev, 0))
return;
@@ -672,11 +672,10 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
writel(val, op_reg_base + EHCI_USBCMD);

wait_time = 2000;
- delta = 100;
do {
writel(0x3f, op_reg_base + EHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
+ udelay(100);
+ wait_time -= 100;
val = readl(op_reg_base + EHCI_USBSTS);
if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
break;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 3428528..d718033 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -875,7 +875,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
struct xhci_virt_device *dev;
struct xhci_ep_ctx *ep0_ctx;
struct xhci_slot_ctx *slot_ctx;
- struct xhci_input_control_ctx *ctrl_ctx;
u32 port_num;
struct usb_device *top_dev;

@@ -887,12 +886,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
return -EINVAL;
}
ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
- ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);

- /* 2) New slot context and endpoint 0 context are valid*/
- ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
-
/* 3) Only the control endpoint is valid - one endpoint context */
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
switch (udev->speed) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index dd3eb6f..2c07fff 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -816,23 +816,24 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
struct xhci_ring *ring;
struct xhci_td *cur_td;
int ret, i, j;
+ unsigned long flags;

ep = (struct xhci_virt_ep *) arg;
xhci = ep->xhci;

- spin_lock(&xhci->lock);
+ spin_lock_irqsave(&xhci->lock, flags);

ep->stop_cmds_pending--;
if (xhci->xhc_state & XHCI_STATE_DYING) {
xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
"xHCI as DYING, exiting.\n");
- spin_unlock(&xhci->lock);
+ spin_unlock_irqrestore(&xhci->lock, flags);
return;
}
if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
"exiting.\n");
- spin_unlock(&xhci->lock);
+ spin_unlock_irqrestore(&xhci->lock, flags);
return;
}

@@ -844,11 +845,11 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
xhci->xhc_state |= XHCI_STATE_DYING;
/* Disable interrupts from the host controller and start halting it */
xhci_quiesce(xhci);
- spin_unlock(&xhci->lock);
+ spin_unlock_irqrestore(&xhci->lock, flags);

ret = xhci_halt(xhci);

- spin_lock(&xhci->lock);
+ spin_lock_irqsave(&xhci->lock, flags);
if (ret < 0) {
/* This is bad; the host is not responding to commands and it's
* not allowing itself to be halted. At least interrupts are
@@ -896,7 +897,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
}
}
}
- spin_unlock(&xhci->lock);
+ spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Calling usb_hc_died()\n");
usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
xhci_dbg(xhci, "xHCI host controller is dead.\n");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3770004..67900ff 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -749,7 +749,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
u32 command, temp = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
- int retval;
+ int retval = 0;

/* Wait a bit if either of the roothubs need to settle from the
* transition into bus suspend.
@@ -759,6 +759,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
xhci->bus_state[1].next_statechange))
msleep(100);

+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+
spin_lock_irq(&xhci->lock);
if (xhci->quirks & XHCI_RESET_ON_RESUME)
hibernated = true;
@@ -828,20 +831,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
return retval;
xhci_dbg(xhci, "Start the primary HCD\n");
retval = xhci_run(hcd->primary_hcd);
- if (retval)
- goto failed_restart;
-
- xhci_dbg(xhci, "Start the secondary HCD\n");
- retval = xhci_run(secondary_hcd);
if (!retval) {
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- set_bit(HCD_FLAG_HW_ACCESSIBLE,
- &xhci->shared_hcd->flags);
+ xhci_dbg(xhci, "Start the secondary HCD\n");
+ retval = xhci_run(secondary_hcd);
}
-failed_restart:
hcd->state = HC_STATE_SUSPENDED;
xhci->shared_hcd->state = HC_STATE_SUSPENDED;
- return retval;
+ goto done;
}

/* step 4: set Run/Stop bit */
@@ -860,11 +856,14 @@ failed_restart:
* Running endpoints by ringing their doorbells
*/

- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
-
spin_unlock_irq(&xhci->lock);
- return 0;
+
+ done:
+ if (retval == 0) {
+ usb_hcd_resume_root_hub(hcd);
+ usb_hcd_resume_root_hub(xhci->shared_hcd);
+ }
+ return retval;
}
#endif /* CONFIG_PM */

@@ -2873,6 +2872,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
/* Otherwise, update the control endpoint ring enqueue pointer. */
else
xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+ ctrl_ctx->drop_flags = 0;
+
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);

@@ -2954,7 +2957,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
+ 1;
/* Zero the input context control for later use */
- ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
ctrl_ctx->add_flags = 0;
ctrl_ctx->drop_flags = 0;

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 5cdb9d9..18e875b 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -42,7 +42,7 @@ static int debug;
* Version information
*/

-#define DRIVER_VERSION "v0.6"
+#define DRIVER_VERSION "v0.7"
#define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
#define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
#define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
@@ -380,10 +380,6 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
goto err_out;
}

- /* setup termios */
- if (tty)
- ark3116_set_termios(tty, port, NULL);
-
/* remove any data still left: also clears error state */
ark3116_read_reg(serial, UART_RX, buf);

@@ -406,6 +402,10 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
/* enable DMA */
ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT);

+ /* setup termios */
+ if (tty)
+ ark3116_set_termios(tty, port, NULL);
+
err_out:
kfree(buf);
return result;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f34f6ed..e16394c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2083,13 +2083,19 @@ static void ftdi_set_termios(struct tty_struct *tty,

cflag = termios->c_cflag;

- /* FIXME -For this cut I don't care if the line is really changing or
- not - so just do the change regardless - should be able to
- compare old_termios and tty->termios */
+ if (old_termios->c_cflag == termios->c_cflag
+ && old_termios->c_ispeed == termios->c_ispeed
+ && old_termios->c_ospeed == termios->c_ospeed)
+ goto no_c_cflag_changes;
+
/* NOTE These routines can get interrupted by
ftdi_sio_read_bulk_callback - need to examine what this means -
don't see any problems yet */

+ if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+ (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+ goto no_data_parity_stop_changes;
+
/* Set number of data bits, parity, stop bits */

urb_value = 0;
@@ -2130,6 +2136,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
}

/* Now do the baudrate */
+no_data_parity_stop_changes:
if ((cflag & CBAUD) == B0) {
/* Disable flow control */
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2157,6 +2164,7 @@ static void ftdi_set_termios(struct tty_struct *tty,

/* Set flow control */
/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
+no_c_cflag_changes:
if (cflag & CRTSCTS) {
dbg("%s Setting to CRTSCTS flow control", __func__);
if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 89ae1f6..3a47cbe 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb);
#define HUAWEI_PRODUCT_K4511 0x14CC
#define HUAWEI_PRODUCT_ETS1220 0x1803
#define HUAWEI_PRODUCT_E353 0x1506
+#define HUAWEI_PRODUCT_E173S 0x1C05

#define QUANTA_VENDOR_ID 0x0408
#define QUANTA_PRODUCT_Q101 0xEA02
@@ -316,6 +317,9 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_AC8710 0xfff1
#define ZTE_PRODUCT_AC2726 0xfff5
#define ZTE_PRODUCT_AC8710T 0xffff
+#define ZTE_PRODUCT_MC2718 0xffe8
+#define ZTE_PRODUCT_AD3812 0xffeb
+#define ZTE_PRODUCT_MC2716 0xffed

#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -500,6 +504,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
.reserved = BIT(4),
};

+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+ .sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
+static const struct option_blacklist_info zte_mc2718_z_blacklist = {
+ .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+ .sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
@@ -622,6 +638,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -1043,6 +1060,12 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 614fabc..d44c669 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
- { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3d10d7f..c38b8c0 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
#define ADLINK_VENDOR_ID 0x0b63
#define ADLINK_ND6530_PRODUCT_ID 0x6530

-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID 0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523
-
/* SMART USB Serial Adapter */
#define SMART_VENDOR_ID 0x0b8c
#define SMART_PRODUCT_ID 0x2303
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index fc310f7..0fded39 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -58,7 +58,9 @@

void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
{
- /* Pad the SCSI command with zeros out to 12 bytes
+ /*
+ * Pad the SCSI command with zeros out to 12 bytes. If the
+ * command already is 12 bytes or longer, leave it alone.
*
* NOTE: This only works because a scsi_cmnd struct field contains
* a unsigned char cmnd[16], so we know we have storage available
@@ -66,9 +68,6 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
for (; srb->cmd_len<12; srb->cmd_len++)
srb->cmnd[srb->cmd_len] = 0;

- /* set command length to 12 bytes */
- srb->cmd_len = 12;
-
/* send the command to the transport layer */
usb_stor_invoke_transport(srb, us);
}
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index b238d95..ac28990 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1468,12 +1468,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry
res = NULL;
goto out;
/* This turned out not to be a regular file */
+ case -EISDIR:
case -ENOTDIR:
goto no_open;
case -ELOOP:
if (!(nd->intent.open.flags & O_NOFOLLOW))
goto no_open;
- /* case -EISDIR: */
/* case -EINVAL: */
default:
res = ERR_CAST(inode);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 28b8c3f..5b3d984 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -895,3 +895,35 @@ static int nfs_setlease(struct file *file, long arg, struct file_lock **fl)
file->f_path.dentry->d_name.name, arg);
return -EINVAL;
}
+
+#ifdef CONFIG_NFS_V4
+static int
+nfs4_file_open(struct inode *inode, struct file *filp)
+{
+ /*
+ * NFSv4 opens are handled in d_lookup and d_revalidate. If we get to
+ * this point, then something is very wrong
+ */
+ dprintk("NFS: %s called! inode=%p filp=%p\n", __func__, inode, filp);
+ return -ENOTDIR;
+}
+
+const struct file_operations nfs4_file_operations = {
+ .llseek = nfs_file_llseek,
+ .read = do_sync_read,
+ .write = do_sync_write,
+ .aio_read = nfs_file_read,
+ .aio_write = nfs_file_write,
+ .mmap = nfs_file_mmap,
+ .open = nfs4_file_open,
+ .flush = nfs_file_flush,
+ .release = nfs_file_release,
+ .fsync = nfs_file_fsync,
+ .lock = nfs_lock,
+ .flock = nfs_flock,
+ .splice_read = nfs_file_splice_read,
+ .splice_write = nfs_file_splice_write,
+ .check_flags = nfs_check_flags,
+ .setlease = nfs_setlease,
+};
+#endif /* CONFIG_NFS_V4 */
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index fe12037..679d2f5 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -291,7 +291,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr)
*/
inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->file_inode_ops;
if (S_ISREG(inode->i_mode)) {
- inode->i_fop = &nfs_file_operations;
+ inode->i_fop = NFS_SB(sb)->nfs_client->rpc_ops->file_ops;
inode->i_data.a_ops = &nfs_file_aops;
inode->i_data.backing_dev_info = &NFS_SB(sb)->backing_dev_info;
} else if (S_ISDIR(inode->i_mode)) {
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 85f1690..d4bc9ed9 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -853,6 +853,7 @@ const struct nfs_rpc_ops nfs_v3_clientops = {
.dentry_ops = &nfs_dentry_operations,
.dir_inode_ops = &nfs3_dir_inode_operations,
.file_inode_ops = &nfs3_file_inode_operations,
+ .file_ops = &nfs_file_operations,
.getroot = nfs3_proc_get_root,
.getattr = nfs3_proc_getattr,
.setattr = nfs3_proc_setattr,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 4700fae..2d8a169 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -6267,6 +6267,7 @@ const struct nfs_rpc_ops nfs_v4_clientops = {
.dentry_ops = &nfs4_dentry_operations,
.dir_inode_ops = &nfs4_dir_inode_operations,
.file_inode_ops = &nfs4_file_inode_operations,
+ .file_ops = &nfs4_file_operations,
.getroot = nfs4_proc_get_root,
.getattr = nfs4_proc_getattr,
.setattr = nfs4_proc_setattr,
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index ac40b85..f48125d 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -710,6 +710,7 @@ const struct nfs_rpc_ops nfs_v2_clientops = {
.dentry_ops = &nfs_dentry_operations,
.dir_inode_ops = &nfs_dir_inode_operations,
.file_inode_ops = &nfs_file_inode_operations,
+ .file_ops = &nfs_file_operations,
.getroot = nfs_proc_get_root,
.getattr = nfs_proc_getattr,
.setattr = nfs_proc_setattr,
diff --git a/fs/super.c b/fs/super.c
index 3f56a26..32a81f3 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -61,7 +61,7 @@ static int prune_super(struct shrinker *shrink, struct shrink_control *sc)
return -1;

if (!grab_super_passive(sb))
- return -1;
+ return !sc->nr_to_scan ? 0 : -1;

if (sb->s_op && sb->s_op->nr_cached_objects)
fs_objects = sb->s_op->nr_cached_objects(sb);
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index eaac770..fc0fd15 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -410,6 +410,9 @@ extern const struct inode_operations nfs_file_inode_operations;
extern const struct inode_operations nfs3_file_inode_operations;
#endif /* CONFIG_NFS_V3 */
extern const struct file_operations nfs_file_operations;
+#ifdef CONFIG_NFS_V4
+extern const struct file_operations nfs4_file_operations;
+#endif /* CONFIG_NFS_V4 */
extern const struct address_space_operations nfs_file_aops;
extern const struct address_space_operations nfs_dir_aops;

diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index abd615d..8475f34 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1194,6 +1194,7 @@ struct nfs_rpc_ops {
const struct dentry_operations *dentry_ops;
const struct inode_operations *dir_inode_ops;
const struct inode_operations *file_inode_ops;
+ const struct file_operations *file_ops;

int (*getroot) (struct nfs_server *, struct nfs_fh *,
struct nfs_fsinfo *);
diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h
index 790651b..a83833a 100644
--- a/include/linux/shrinker.h
+++ b/include/linux/shrinker.h
@@ -20,6 +20,7 @@ struct shrink_control {
* 'nr_to_scan' entries and attempt to free them up. It should return
* the number of objects which remain in the cache. If it returns -1, it means
* it cannot do any scanning at this time (eg. there is a risk of deadlock).
+ * The callback must not return -1 if nr_to_scan is zero.
*
* The 'gfpmask' refers to the allocation we are currently trying to
* fulfil.
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index aa57d5d..b5f4742 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -115,7 +115,7 @@ static int misrouted_irq(int irq)
struct irq_desc *desc;
int i, ok = 0;

- if (atomic_inc_return(&irq_poll_active) == 1)
+ if (atomic_inc_return(&irq_poll_active) != 1)
goto out;

irq_poll_cpu = smp_processor_id();
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index fb6931d..d58fd8b 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -137,10 +137,22 @@ static void tt_local_entry_free_ref(struct tt_local_entry *tt_local_entry)
kfree_rcu(tt_local_entry, rcu);
}

+static void tt_global_entry_free_rcu(struct rcu_head *rcu)
+{
+ struct tt_global_entry *tt_global_entry;
+
+ tt_global_entry = container_of(rcu, struct tt_global_entry, rcu);
+
+ if (tt_global_entry->orig_node)
+ orig_node_free_ref(tt_global_entry->orig_node);
+
+ kfree(tt_global_entry);
+}
+
static void tt_global_entry_free_ref(struct tt_global_entry *tt_global_entry)
{
if (atomic_dec_and_test(&tt_global_entry->refcount))
- kfree_rcu(tt_global_entry, rcu);
+ call_rcu(&tt_global_entry->rcu, tt_global_entry_free_rcu);
}

static void tt_local_event(struct bat_priv *bat_priv, const uint8_t *addr,
@@ -686,6 +698,9 @@ void tt_global_del_orig(struct bat_priv *bat_priv,
struct hlist_head *head;
spinlock_t *list_lock; /* protects write access to the hash lists */

+ if (!hash)
+ return;
+
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
list_lock = &hash->list_locks[i];
@@ -999,7 +1014,6 @@ static struct sk_buff *tt_response_fill_table(uint16_t tt_len, uint8_t ttvn,
tt_response = (struct tt_query_packet *)skb_put(skb,
tt_query_size + tt_len);
tt_response->ttvn = ttvn;
- tt_response->tt_data = htons(tt_tot);

tt_change = (struct tt_change *)(skb->data + tt_query_size);
tt_count = 0;
@@ -1025,6 +1039,10 @@ static struct sk_buff *tt_response_fill_table(uint16_t tt_len, uint8_t ttvn,
}
rcu_read_unlock();

+ /* store in the message the number of entries we have successfully
+ * copied */
+ tt_response->tt_data = htons(tt_count);
+
out:
return skb;
}
@@ -1668,6 +1686,8 @@ static void tt_local_reset_flags(struct bat_priv *bat_priv, uint16_t flags)
rcu_read_lock();
hlist_for_each_entry_rcu(tt_local_entry, node,
head, hash_entry) {
+ if (!(tt_local_entry->flags & flags))
+ continue;
tt_local_entry->flags &= ~flags;
atomic_inc(&bat_priv->num_local_tt);
}
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 25bd1db..51a0db7 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -223,22 +223,22 @@ struct socket_packet {

struct tt_local_entry {
uint8_t addr[ETH_ALEN];
+ struct hlist_node hash_entry;
unsigned long last_seen;
uint16_t flags;
atomic_t refcount;
struct rcu_head rcu;
- struct hlist_node hash_entry;
};

struct tt_global_entry {
uint8_t addr[ETH_ALEN];
+ struct hlist_node hash_entry; /* entry in the global table */
struct orig_node *orig_node;
uint8_t ttvn;
uint16_t flags; /* only TT_GLOBAL_ROAM is used */
unsigned long roam_at; /* time at which TT_GLOBAL_ROAM was set */
atomic_t refcount;
struct rcu_head rcu;
- struct hlist_node hash_entry; /* entry in the global table */
};

struct tt_change_node {
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 0bc9888..4e6922f 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -289,6 +289,8 @@ static struct ip6_tnl *ip6_tnl_create(struct net *net, struct ip6_tnl_parm *p)
if ((err = register_netdevice(dev)) < 0)
goto failed_free;

+ strcpy(t->parms.name, dev->name);
+
dev_hold(dev);
ip6_tnl_link(ip6n, t);
return t;
@@ -1397,7 +1399,6 @@ ip6_tnl_dev_init_gen(struct net_device *dev)
struct ip6_tnl *t = netdev_priv(dev);

t->dev = dev;
- strcpy(t->parms.name, dev->name);
dev->tstats = alloc_percpu(struct pcpu_tstats);
if (!dev->tstats)
return -ENOMEM;
@@ -1477,6 +1478,7 @@ static void __net_exit ip6_tnl_destroy_tunnels(struct ip6_tnl_net *ip6n)
static int __net_init ip6_tnl_init_net(struct net *net)
{
struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+ struct ip6_tnl *t = NULL;
int err;

ip6n->tnls[0] = ip6n->tnls_wc;
@@ -1497,6 +1499,10 @@ static int __net_init ip6_tnl_init_net(struct net *net)
err = register_netdev(ip6n->fb_tnl_dev);
if (err < 0)
goto err_register;
+
+ t = netdev_priv(ip6n->fb_tnl_dev);
+
+ strcpy(t->parms.name, ip6n->fb_tnl_dev->name);
return 0;

err_register:
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index fe2c2a7..a961003 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -140,8 +140,9 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
pos++;

/* IEEE80211_RADIOTAP_RATE */
- if (status->flag & RX_FLAG_HT) {
+ if (!rate || status->flag & RX_FLAG_HT) {
/*
+ * Without rate information don't add it. If we have,
* MCS information is a separate field in radiotap,
* added below. The byte here is needed as padding
* for the channel though, so initialise it to 0.
@@ -162,12 +163,14 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
else if (status->flag & RX_FLAG_HT)
put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
pos);
- else if (rate->flags & IEEE80211_RATE_ERP_G)
+ else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
pos);
- else
+ else if (rate)
put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
pos);
+ else
+ put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
pos += 2;

/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index ddeb1b9..fd031e8 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1055,6 +1055,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata,
skb = ieee80211_probereq_get(&local->hw, &sdata->vif,
ssid, ssid_len,
buf, buf_len);
+ if (!skb)
+ goto out;

if (dst) {
mgmt = (struct ieee80211_mgmt *) skb->data;
@@ -1063,6 +1065,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata,
}

IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+ out:
kfree(buf);

return skb;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ea40d54..1308050 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -126,8 +126,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },

- [NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
- .len = NL80211_HT_CAPABILITY_LEN },
+ [NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN },

[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
[NL80211_ATTR_IE] = { .type = NLA_BINARY,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 68a471b..1658eff 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2254,6 +2254,9 @@ void /* __init_or_exit */ regulatory_exit(void)

kfree(last_request);

+ last_request = NULL;
+ dev_set_uevent_suppress(&reg_pdev->dev, true);
+
platform_device_unregister(reg_pdev);

spin_lock_bh(&reg_pending_beacons_lock);
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index c34f730..44f199c 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -297,10 +297,10 @@ static int hdmi_update_eld(struct hdmi_eld *e,
buf + ELD_FIXED_BYTES + mnl + 3 * i);
}

+ e->eld_valid = true;
return 0;

out_fail:
- e->eld_ver = 0;
return -EINVAL;
}

@@ -318,9 +318,6 @@ int snd_hdmi_get_eld(struct hdmi_eld *eld,
int size;
unsigned char *buf;

- if (!eld->eld_valid)
- return -ENOENT;
-
size = snd_hdmi_get_eld_size(codec, nid);
if (size == 0) {
/* wfg: workaround for ASUS P5E-VM HDMI board */
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index c45f3e6..4346ad2 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -236,6 +236,15 @@ static int cs_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
}

+static void cs_update_input_select(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ if (spec->cur_adc)
+ snd_hda_codec_write(codec, spec->cur_adc, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ spec->adc_idx[spec->cur_input]);
+}
+
/*
* Analog capture
*/
@@ -249,6 +258,7 @@ static int cs_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
spec->cur_adc = spec->adc_nid[spec->cur_input];
spec->cur_adc_stream_tag = stream_tag;
spec->cur_adc_format = format;
+ cs_update_input_select(codec);
snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
return 0;
}
@@ -688,10 +698,8 @@ static int change_cur_input(struct hda_codec *codec, unsigned int idx,
spec->cur_adc_stream_tag, 0,
spec->cur_adc_format);
}
- snd_hda_codec_write(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[idx]);
spec->cur_input = idx;
+ cs_update_input_select(codec);
return 1;
}

@@ -972,10 +980,7 @@ static void cs_automic(struct hda_codec *codec)
} else {
spec->cur_input = spec->last_input;
}
-
- snd_hda_codec_write_cache(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[spec->cur_input]);
+ cs_update_input_select(codec);
} else {
if (present)
change_cur_input(codec, spec->automic_idx, 0);
@@ -1072,9 +1077,7 @@ static void init_input(struct hda_codec *codec)
cs_automic(codec);
else {
spec->cur_adc = spec->adc_nid[spec->cur_input];
- snd_hda_codec_write(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[spec->cur_input]);
+ cs_update_input_select(codec);
}
} else {
change_cur_input(codec, spec->cur_input, 1);
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 19cb72d..e287015 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -920,20 +920,23 @@ static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
* the unsolicited response to avoid custom WARs.
*/
int present = snd_hda_pin_sense(codec, pin_nid);
+ bool eld_valid = false;

- memset(eld, 0, sizeof(*eld));
+#ifdef CONFIG_PROC_FS
+ memset(eld, 0, offsetof(struct hdmi_eld, proc_entry));
+#else
+ memset(eld, 0, sizeof(struct hdmi_eld));
+#endif

eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE);
if (eld->monitor_present)
- eld->eld_valid = !!(present & AC_PINSENSE_ELDV);
- else
- eld->eld_valid = 0;
+ eld_valid = !!(present & AC_PINSENSE_ELDV);

printk(KERN_INFO
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+ codec->addr, pin_nid, eld->monitor_present, eld_valid);

- if (eld->eld_valid)
+ if (eld_valid)
if (!snd_hdmi_get_eld(eld, codec, pin_nid))
snd_hdmi_show_eld(eld);


\
 
 \ /
  Last update: 2011-11-27 20:13    [from the cache]
©2003-2011 Jasper Spaans