lkml.org 
[lkml]   [2011]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/i915: By default, enable RC6 on IVB and SNB when reasonable
From
Date
On Wed, 2011-11-23 at 15:39 +0100, Daniel Vetter wrote:
> At least for the dmar+gfx+semaphores hang I can reproduce, just disabling
> dmar with intel_iommu=igfx_off is not good enough and iirc the same holds
> for the dmar+rc6 hangs reported.

Um... let me restate that for clarity (and partly for Rajesh's benefit).

The DMAR associated with the integrated graphics is *disabled*.
Turned off. Not active. Ever.

You have a problem when you enable the *other* DMAR units in the system,
which should not be affecting the graphics device in any way.

When you do this, you see 'hangs' with semaphores and RC6. Is there a
better description of these 'hangs' somewhere? Is the hardware
completely locked?

These hangs go away when you disable the DMAR units. Again, that is the
*other* DMAR units in the system that have nothing to do with graphics.

While I'm getting quite used to DMAR-related errata, this one does make
me stop and think 'wtf?'. It just seems so incongruous that disabling an
*unrelated* IOMMU would make the problem go away, and it makes me wonder
if it's actually a timing-related issue which is always there, but
something about the use of DMAR for network/disk/etc. makes it more
likely to trigger?

We definitely need the hardware folks to get to the bottom of this one.

--
dwmw2
[unhandled content-type:application/x-pkcs7-signature]
\
 
 \ /
  Last update: 2011-11-23 16:07    [W:0.076 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site