lkml.org 
[lkml]   [2011]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[05/53] [media] saa7164: Add support for another HVR2200 hardware revision
3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Jago <tony@hammertelecom.com.au>

commit 62dd28d0c659db29bdb89cfe9f0aefe42f0adfe9 upstream.

Hauppauge have released a new model rev, sub id 8940, this adds
support.

[stoth@kernellabs.com: I modified Tony's patch slightly in relation to the
card numbering in saa7164.h, appending rather than inserting the new card
- normal practise]
Signed-off-by: Tony Jago <tony@hammertelecom.com.au>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/media/video/saa7164/saa7164-cards.c | 66 ++++++++++++++++++++++++++++
drivers/media/video/saa7164/saa7164-dvb.c | 1
drivers/media/video/saa7164/saa7164.h | 1
3 files changed, 68 insertions(+)

--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -203,6 +203,66 @@ struct saa7164_board saa7164_boards[] =
.i2c_reg_len = REGLEN_8bit,
} },
},
+ [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+ .name = "Hauppauge WinTV-HVR2200",
+ .porta = SAA7164_MPEG_DVB,
+ .portb = SAA7164_MPEG_DVB,
+ .portc = SAA7164_MPEG_ENCODER,
+ .portd = SAA7164_MPEG_ENCODER,
+ .porte = SAA7164_MPEG_VBI,
+ .portf = SAA7164_MPEG_VBI,
+ .chiprev = SAA7164_CHIP_REV3,
+ .unit = {{
+ .id = 0x1d,
+ .type = SAA7164_UNIT_EEPROM,
+ .name = "4K EEPROM",
+ .i2c_bus_nr = SAA7164_I2C_BUS_0,
+ .i2c_bus_addr = 0xa0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x04,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x05,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1b,
+ .type = SAA7164_UNIT_TUNER,
+ .name = "TDA18271-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0xc0 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1c,
+ .type = SAA7164_UNIT_ANALOG_DEMODULATOR,
+ .name = "TDA8290-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x84 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1e,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-1",
+ .i2c_bus_nr = SAA7164_I2C_BUS_1,
+ .i2c_bus_addr = 0x10 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ }, {
+ .id = 0x1f,
+ .type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+ .name = "TDA10048-2",
+ .i2c_bus_nr = SAA7164_I2C_BUS_2,
+ .i2c_bus_addr = 0x12 >> 1,
+ .i2c_reg_len = REGLEN_8bit,
+ } },
+ },
[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
.name = "Hauppauge WinTV-HVR2250",
.porta = SAA7164_MPEG_DVB,
@@ -426,6 +486,10 @@ struct saa7164_subid saa7164_subids[] =
.subvendor = 0x0070,
.subdevice = 0x8851,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x8940,
+ .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
},
};
const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -469,6 +533,7 @@ void saa7164_gpio_setup(struct saa7164_d
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -549,6 +614,7 @@ void saa7164_card_setup(struct saa7164_d
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -475,6 +475,7 @@ int saa7164_dvb_register(struct saa7164_
case SAA7164_BOARD_HAUPPAUGE_HVR2200:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+ case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
i2c_bus = &dev->i2c_bus[port->nr + 1];
switch (port->nr) {
case 0:
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -83,6 +83,7 @@
#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4 9

#define SAA7164_MAX_UNITS 8
#define SAA7164_TS_NUMBER_OF_LINES 312



\
 
 \ /
  Last update: 2011-11-23 01:45    [W:0.130 / U:3.376 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site