lkml.org 
[lkml]   [2011]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: extra large DMA buffer for PCI-E device under UIO
Date

On Nov 18, 2011, at 17:27, Hans J. Koch wrote:

> On Fri, Nov 18, 2011 at 04:16:23PM -0500, Jean-Francois Dagenais wrote:
>> Hello fellow hackers.
>
> Hi. Could you please limit the line length of your mails to something less
> than 80 chars?
hehe, I don't think I have ever managed line length of regular talk in mails I have sent.
I read and write from mail clients that line wrap for me, (mac mail right now, please don't
judge me... I still make contributions to the kernel!! :)
>
>>
>> I am maintaining a UIO based driver for a PCI-E data acquisition device.
>
> Can you post it? No point in discussing non-existent code...
Well, the code does exist, but the driver drive's a pci device which is only found in
a product we sell. The pci ID we use is not registered, and except for this driver, which
is a non-driver really (UIO), the FPGA firmware and the userspace code is proprietary.

I have no problem sharing the code that runs in the kernel and will send a patch for you to
review, but contrary to other contributions I make to w1 or i2c device drivers, I never expect
this code to make it into the mainline. For this reason, as well as the fact it is my very first
kernel code project, it is quite non-conforming to the kernel standards in many respects
(line length, symbol names, etc.)
>
>>
>> I map BAR0 of the device to userspace. I also map two memory areas, one is used to feed instructions to the acquisition device, the other is used autonomously by the PCI device to write the acquired data.
>>
>> The strategy we have been using for those two share memory areas has historically been using pci_alloc_coherent on v2.6.35 x86_64 (limited to 4MB based on my trials) and later, I made use of the VT-d (intel_iommu) to allocate as much as 128MB (an arbitrary limit) which appear contiguous to the PCI device. I use vmalloc_user to allocate 128M, then write all the physically continuous segments in a scatterlist, then use pci_map_sg which works it's way to intel_iommu. The device DMA addresses I get back are contiguous over the whole 128M. Neat! Our VT-d capable devices still use this strategy.
>>
>> This large memory is mission-critical in making the acquisition device autonomous (real-time), yet keep the DMA implementation very simple. Today, we are re-using this device on a CPU architecture that has no IOMMU (intel E6XX/EG20T) and want to avoid creating a scatter-gather scheme between my driver and the FPGA (PCI device).
>>
>> So I went back to the old pci_alloc_coherent method, which although limited to 4 MB, will do for early development phases. Instead of 2.6.35, we are doing preliminary development using 2.6.37 and will probably use 3.1 or more later. The cpu/device shared memory maps (1MB and 4MB) are allocated using pci_alloc_coherent and handed to UIO as physical memory using the dma_addr_t returned by the pci_alloc func.
>>
>> The 1st memory map is written to by CPU and read from device.
>> The 2nd memory map is typically written by the device and read by the CPU, but future features may have the device also read this memory.
>>
>> My initial testing on the atom E6XX show the PCI device failing when trying to read from the first memory map.
>
> Any kernel messages in the logs that could help?
My FPGA engineer is currently instrumenting the firmware to see what is happening.

I guess when we figure why the FPGA cannot read the system RAM, I am still stuck with the small 4MB buffer...
any thoughts how to get way more without the use of a device side IOMMU?
>
> [...]
>
> Thanks,
> Hans
Thanks for your help!
(hope my manual line length management helped you! ;)
/jfd

\
 
 \ /
  Last update: 2011-11-21 16:09    [W:1.248 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site