lkml.org 
[lkml]   [2011]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] s3c/s3c24xx: arm: leds: Make s3c24xx LEDS driver use gpiolib
Make s3c24xx LEDS driver use gpiolib. Disable using pull-resistor when not
using S3C24XX_LEDF_TRISTATE and enble it when in opposite case.

Signed-off-by: Denis Kuzmenko <linux@solonet.org.ua>
---

Patch is against 3.0.9
Tested on Mini2440 board which implements most complex case where both
S3C24XX_LEDF_ACTLOW and S3C24XX_LEDF_TRISTATE are set

diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index a77771d..63feda8 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -45,23 +45,35 @@ static void s3c24xx_led_set(struct led_classdev *led_cdev,
struct s3c24xx_gpio_led *led = to_gpio(led_cdev);
struct s3c24xx_led_platdata *pd = led->pdata;

- /* there will be a short delay between setting the output and
- * going from output to input when using tristate. */
-
- s3c2410_gpio_setpin(pd->gpio, (value ? 1 : 0) ^
- (pd->flags & S3C24XX_LEDF_ACTLOW));
-
- if (pd->flags & S3C24XX_LEDF_TRISTATE)
- s3c2410_gpio_cfgpin(pd->gpio,
- value ? S3C2410_GPIO_OUTPUT : S3C2410_GPIO_INPUT);
+ /*
+ * ensure value is 0 or 1 to use it with bitwise XOR (^)
+ * (only 100% brightness is supported)
+ */
+ value = value ? 1 : 0;
+
+ if (pd->flags & S3C24XX_LEDF_TRISTATE) {
+ if (value) {
+ /* invert value if S3C24XX_LEDF_ACTLOW is set */
+ value = (pd->flags & S3C24XX_LEDF_ACTLOW) ^ value;
+ gpio_direction_output(pd->gpio, value);
+ } else {
+ gpio_direction_input(pd->gpio);
+ }
+ } else {
+ /* invert value if S3C24XX_LEDF_ACTLOW is set */
+ value = (pd->flags & S3C24XX_LEDF_ACTLOW) ^ value;
+ gpio_set_value(pd->gpio, value);
+ }

}

static int s3c24xx_led_remove(struct platform_device *dev)
{
+ struct s3c24xx_led_platdata *pdata = dev->dev.platform_data;
struct s3c24xx_gpio_led *led = pdev_to_gpio(dev);

led_classdev_unregister(&led->cdev);
+ gpio_free(pdata->gpio);
kfree(led);

return 0;
@@ -76,7 +88,8 @@ static int s3c24xx_led_probe(struct platform_device *dev)
led = kzalloc(sizeof(struct s3c24xx_gpio_led), GFP_KERNEL);
if (led == NULL) {
dev_err(&dev->dev, "No memory for device\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_kzalloc;
}

platform_set_drvdata(dev, led);
@@ -88,15 +101,33 @@ static int s3c24xx_led_probe(struct platform_device *dev)

led->pdata = pdata;

- /* no point in having a pull-up if we are always driving */
+ ret = gpio_request(pdata->gpio, pdata->name);
+ if (ret < 0) {
+ dev_err(&dev->dev, "gpio_request failed\n");
+ goto err_gpio_request;
+ }

if (pdata->flags & S3C24XX_LEDF_TRISTATE) {
- s3c2410_gpio_setpin(pdata->gpio, 0);
- s3c2410_gpio_cfgpin(pdata->gpio, S3C2410_GPIO_INPUT);
+ /*
+ * pull is needed here to protect pin from being left
+ * floating (this is dangerous since pin becomes more
+ * sensitive to ESD)
+ */
+ ret = s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_UP);
+ if (ret)
+ s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_DOWN);
+ /* initially turn off led */
+ ret = gpio_direction_input(pdata->gpio);
} else {
- s3c2410_gpio_pullup(pdata->gpio, 0);
- s3c2410_gpio_setpin(pdata->gpio, 0);
- s3c2410_gpio_cfgpin(pdata->gpio, S3C2410_GPIO_OUTPUT);
+ /* no point in having a pull-up as we are always driving */
+ s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_NONE);
+ /* initially turn off led */
+ ret = gpio_direction_output(pdata->gpio,
+ !!(pdata->flags & S3C24XX_LEDF_ACTLOW));
+ }
+ if (ret < 0) {
+ dev_err(&dev->dev, "can't set gpio direction\n");
+ goto err_gpio_set_direction;
}

/* register our new led device */
@@ -104,11 +135,18 @@ static int s3c24xx_led_probe(struct platform_device *dev)
ret = led_classdev_register(&dev->dev, &led->cdev);
if (ret < 0) {
dev_err(&dev->dev, "led_classdev_register failed\n");
- kfree(led);
- return ret;
+ goto err_led_classdev_register;
}

return 0;
+
+err_led_classdev_register:
+err_gpio_set_direction:
+ gpio_free(pdata->gpio);
+err_gpio_request:
+ kfree(led);
+err_kzalloc:
+ return ret;
}

static struct platform_driver s3c24xx_led_driver = {


\
 
 \ /
  Last update: 2011-11-18 23:41    [W:0.074 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site