lkml.org 
[lkml]   [2011]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/11] MFD: DA9052 MFD core module v8
From
Date
On Thu, 2011-11-03 at 11:44 +0530, Ashish Jangam wrote:
> The DA9052/53 is a highly integrated PMIC subsystem with supply domain
> flexibility to support wide range of high performance application.
>
> It provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery
> control and other functionality.
>
> Signed-off-by: David Dajun Chen <dchen@diasemi.com>
> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
> ---
[...]
> ---
> drivers/mfd/Kconfig | 26 ++
> drivers/mfd/Makefile | 7 +
> drivers/mfd/da9052-core.c | 371 ++++++++++++++++++
> drivers/mfd/da9052-i2c.c | 144 +++++++
> drivers/mfd/da9052-irq.c | 175 +++++++++
> drivers/mfd/da9052-spi.c | 169 ++++++++
> include/linux/mfd/da9052/da9052.h | 154 ++++++++
> include/linux/mfd/da9052/pdata.h | 42 ++
> include/linux/mfd/da9052/reg.h | 777 +++++++++++++++++++++++++++++++++++++
> 9 files changed, 1865 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mfd/da9052-core.c
> create mode 100644 drivers/mfd/da9052-i2c.c
> create mode 100644 drivers/mfd/da9052-irq.c
> create mode 100644 drivers/mfd/da9052-spi.c
> create mode 100644 include/linux/mfd/da9052/da9052.h
> create mode 100644 include/linux/mfd/da9052/pdata.h
> create mode 100644 include/linux/mfd/da9052/reg.h

These three headers are needed by drivers/gpio/gpio-da9052.c. (That file
also needs a fourth header, linux/mfd/da9052/gpio.h, but maybe that's
added by another patch in this series. I didn't check). That file got
added by commit 07bfc91523 ("GPIO: DA9052 GPIO module v3"), and is
included since v3.1.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index f1391c2..268f03b 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -328,6 +328,32 @@ config PMIC_DA903X
> individual components like LCD backlight, voltage regulators,
> LEDs and battery-charger under the corresponding menus.
>
> +config PMIC_DA9052
> + bool
> + select MFD_CORE

And the DA9052 GPIO module currently depends on this Kconfig symbol.

> +config MFD_DA9052_SPI
> + bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
> + select REGMAP_SPI
> + select PMIC_DA9052
> + depends on SPI_MASTER=y
> + help
> + Support for the Dialog Semiconductor DA9052 PMIC
> + when controlled using SPI. This driver provides common support
> + for accessing the device, additional drivers must be enabled in
> + order to use the functionality of the device.
> +
> +config MFD_DA9052_I2C
> + bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
> + select REGMAP_I2C
> + select PMIC_DA9052
> + depends on I2C=y
> + help
> + Support for the Dialog Semiconductor DA9052 PMIC
> + when controlled using I2C. This driver provides common support
> + for accessing the device, additional drivers must be enabled in
> + order to use the functionality of the device.
> +
> config PMIC_ADP5520
> bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
> depends on I2C=y

[...]

So the DA9052 GPIO module that is currently in the mainline tree was
added as unbuildable code, wasn't it?


Paul Bolle



\
 
 \ /
  Last update: 2011-11-18 10:59    [W:0.047 / U:25.476 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site