lkml.org 
[lkml]   [2011]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    SubjectRe: [PATCH 3/4] mmc: Logging neatening
    From
    2011/11/16 Joe Perches <joe@perches.com>:
    > Coalesce formats.
    > Align arguments.
    > Add pr_fmt, remove prefixes from format strings.
    > Neaten DBG uses, rearrange argument order.
    >
    > Signed-off-by: Joe Perches <joe@perches.com>
    > ---
    >  drivers/mmc/card/mmc_test.c    |   49 +++++-------
    >  drivers/mmc/core/core.c        |   52 ++++++------
    >  drivers/mmc/core/host.c        |    3 +-
    >  drivers/mmc/core/mmc.c         |   22 ++---
    >  drivers/mmc/core/mmc_ops.c     |    5 +-
    >  drivers/mmc/core/sd.c          |   25 +++---
    >  drivers/mmc/core/sdio_bus.c    |    2 +
    >  drivers/mmc/core/sdio_io.c     |   14 ++--
    >  drivers/mmc/core/sdio_irq.c    |   10 ++-
    >  drivers/mmc/host/at91_mci.c    |    3 +-
    >  drivers/mmc/host/au1xmmc.c     |   35 ++++----
    >  drivers/mmc/host/bfin_sdh.c    |    3 +-
    >  drivers/mmc/host/dw_mmc.c      |   16 ++--
    >  drivers/mmc/host/mmc_spi.c     |    9 +-
    >  drivers/mmc/host/mmci.c        |    3 +-
    >  drivers/mmc/host/mvsdio.c      |   33 ++++----
    >  drivers/mmc/host/omap_hsmmc.c  |   11 +--
    >  drivers/mmc/host/sdhci-pci.c   |   17 ++---
    >  drivers/mmc/host/sdhci-pxav3.c |    7 +-
    >  drivers/mmc/host/sdhci.c       |  175 ++++++++++++++++++---------------------
    >  drivers/mmc/host/sdricoh_cs.c  |   12 ++--
    >  drivers/mmc/host/tifm_sd.c     |    9 +-
    >  drivers/mmc/host/via-sdmmc.c   |   22 +++---
    >  drivers/mmc/host/vub300.c      |   54 ++++++-------
    >  drivers/mmc/host/wbsd.c        |    5 +-
    >  25 files changed, 277 insertions(+), 319 deletions(-)
    >
    > diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
    > index b038c4a..f079555 100644
    > --- a/drivers/mmc/card/mmc_test.c
    > +++ b/drivers/mmc/card/mmc_test.c
    > @@ -9,6 +9,8 @@
    >  * your option) any later version.
    >  */
    >
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/mmc/core.h>
    >  #include <linux/mmc/card.h>
    >  #include <linux/mmc/host.h>
    > @@ -251,8 +253,7 @@ static int mmc_test_wait_busy(struct mmc_test_card *test)
    >                if (!busy && mmc_test_busy(&cmd)) {
    >                        busy = 1;
    >                        if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
    > -                               pr_info("%s: Warning: Host did not "
    > -                                       "wait for busy state to end.\n",
    > +                               pr_info("%s: Warning: Host did not wait for busy state to end\n",
    >                                        mmc_hostname(test->card->host));
    >                }
    >        } while (mmc_test_busy(&cmd));
    > @@ -553,12 +554,11 @@ static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes,
    >        rate = mmc_test_rate(bytes, &ts);
    >        iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
    >
    > -       pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
    > -                        "seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
    > -                        mmc_hostname(test->card->host), sectors, sectors >> 1,
    > -                        (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
    > -                        (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
    > -                        iops / 100, iops % 100);
    > +       pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
    > +               mmc_hostname(test->card->host), sectors, sectors >> 1,
    > +               (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
    > +               (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
    > +               iops / 100, iops % 100);
    >
    >        mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops);
    >  }
    > @@ -579,14 +579,12 @@ static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes,
    >        rate = mmc_test_rate(tot, &ts);
    >        iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
    >
    > -       pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
    > -                        "%lu.%09lu seconds (%u kB/s, %u KiB/s, "
    > -                        "%u.%02u IOPS, sg_len %d)\n",
    > -                        mmc_hostname(test->card->host), count, sectors, count,
    > -                        sectors >> 1, (sectors & 1 ? ".5" : ""),
    > -                        (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
    > -                        rate / 1000, rate / 1024, iops / 100, iops % 100,
    > -                        test->area.sg_len);
    > +       pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS, sg_len %d)\n",
    > +               mmc_hostname(test->card->host), count, sectors, count,
    > +               sectors >> 1, (sectors & 1 ? ".5" : ""),
    > +               (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
    > +               rate / 1000, rate / 1024, iops / 100, iops % 100,
    > +               test->area.sg_len);
    >
    >        mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops);
    >  }
    > @@ -1410,7 +1408,7 @@ static int mmc_test_multi_read_high(struct mmc_test_card *test)
    >  static int mmc_test_no_highmem(struct mmc_test_card *test)
    >  {
    >        pr_info("%s: Highmem not configured - test skipped\n",
    > -              mmc_hostname(test->card->host));
    > +               mmc_hostname(test->card->host));
    >        return 0;
    >  }
    >
    > @@ -1437,7 +1435,7 @@ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz,
    >        }
    >        if (err)
    >                pr_info("%s: Failed to map sg list\n",
    > -                      mmc_hostname(test->card->host));
    > +                       mmc_hostname(test->card->host));
    >        return err;
    >  }
    >
    > @@ -2709,8 +2707,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
    >                if (mmc_test_cases[i].prepare) {
    >                        ret = mmc_test_cases[i].prepare(test);
    >                        if (ret) {
    > -                               pr_info("%s: Result: Prepare "
    > -                                       "stage failed! (%d)\n",
    > +                               pr_info("%s: Result: Prepare stage failed! (%d)\n",
    >                                        mmc_hostname(test->card->host),
    >                                        ret);
    >                                continue;
    > @@ -2747,13 +2744,11 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
    >                                mmc_hostname(test->card->host));
    >                        break;
    >                case RESULT_UNSUP_HOST:
    > -                       pr_info("%s: Result: UNSUPPORTED "
    > -                               "(by host)\n",
    > +                       pr_info("%s: Result: UNSUPPORTED (by host)\n",
    >                                mmc_hostname(test->card->host));
    >                        break;
    >                case RESULT_UNSUP_CARD:
    > -                       pr_info("%s: Result: UNSUPPORTED "
    > -                               "(by card)\n",
    > +                       pr_info("%s: Result: UNSUPPORTED (by card)\n",
    >                                mmc_hostname(test->card->host));
    >                        break;
    >                default:
    > @@ -2768,8 +2763,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
    >                if (mmc_test_cases[i].cleanup) {
    >                        ret = mmc_test_cases[i].cleanup(test);
    >                        if (ret) {
    > -                               pr_info("%s: Warning: Cleanup "
    > -                                       "stage failed! (%d)\n",
    > +                               pr_info("%s: Warning: Cleanup stage failed! (%d)\n",
    >                                        mmc_hostname(test->card->host),
    >                                        ret);
    >                        }
    > @@ -2778,8 +2772,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
    >
    >        mmc_release_host(test->card->host);
    >
    > -       pr_info("%s: Tests completed.\n",
    > -               mmc_hostname(test->card->host));
    > +       pr_info("%s: Tests completed\n", mmc_hostname(test->card->host));
    >  }
    >
    >  static void mmc_test_free_result(struct mmc_card *card)
    > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
    > index 54d6a13..39e1311 100644
    > --- a/drivers/mmc/core/core.c
    > +++ b/drivers/mmc/core/core.c
    > @@ -10,6 +10,9 @@
    >  * it under the terms of the GNU General Public License version 2 as
    >  * published by the Free Software Foundation.
    >  */
    > +
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/module.h>
    >  #include <linux/init.h>
    >  #include <linux/interrupt.h>
    > @@ -153,22 +156,22 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
    >                led_trigger_event(host->led, LED_OFF);
    >
    >                pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
    > -                       mmc_hostname(host), cmd->opcode, err,
    > -                       cmd->resp[0], cmd->resp[1],
    > -                       cmd->resp[2], cmd->resp[3]);
    > +                        mmc_hostname(host), cmd->opcode, err,
    > +                        cmd->resp[0], cmd->resp[1],
    > +                        cmd->resp[2], cmd->resp[3]);
    >
    >                if (mrq->data) {
    >                        pr_debug("%s:     %d bytes transferred: %d\n",
    > -                               mmc_hostname(host),
    > -                               mrq->data->bytes_xfered, mrq->data->error);
    > +                                mmc_hostname(host),
    > +                                mrq->data->bytes_xfered, mrq->data->error);
    >                }
    >
    >                if (mrq->stop) {
    >                        pr_debug("%s:     (CMD%u): %d: %08x %08x %08x %08x\n",
    > -                               mmc_hostname(host), mrq->stop->opcode,
    > -                               mrq->stop->error,
    > -                               mrq->stop->resp[0], mrq->stop->resp[1],
    > -                               mrq->stop->resp[2], mrq->stop->resp[3]);
    > +                                mmc_hostname(host), mrq->stop->opcode,
    > +                                mrq->stop->error,
    > +                                mrq->stop->resp[0], mrq->stop->resp[1],
    > +                                mrq->stop->resp[2], mrq->stop->resp[3]);
    >                }
    >
    >                if (mrq->done)
    > @@ -193,12 +196,11 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
    >                 mrq->cmd->arg, mrq->cmd->flags);
    >
    >        if (mrq->data) {
    > -               pr_debug("%s:     blksz %d blocks %d flags %08x "
    > -                       "tsac %d ms nsac %d\n",
    > -                       mmc_hostname(host), mrq->data->blksz,
    > -                       mrq->data->blocks, mrq->data->flags,
    > -                       mrq->data->timeout_ns / 1000000,
    > -                       mrq->data->timeout_clks);
    > +               pr_debug("%s:     blksz %d blocks %d flags %08x tsac %d ms nsac %d\n",
    > +                        mmc_hostname(host), mrq->data->blksz,
    > +                        mrq->data->blocks, mrq->data->flags,
    > +                        mrq->data->timeout_ns / 1000000,
    > +                        mrq->data->timeout_clks);
    >        }
    >
    >        if (mrq->stop) {
    > @@ -842,8 +844,7 @@ static inline void mmc_set_ios(struct mmc_host *host)
    >  {
    >        struct mmc_ios *ios = &host->ios;
    >
    > -       pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
    > -               "width %u timing %u\n",
    > +       pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
    >                 mmc_hostname(host), ios->clock, ios->bus_mode,
    >                 ios->power_mode, ios->chip_select, ios->vdd,
    >                 ios->bus_width, ios->timing);
    > @@ -1310,8 +1311,7 @@ void mmc_power_off(struct mmc_host *host)
    >                                 notify_type, timeout);
    >
    >                if (err && err != -EBADMSG)
    > -                       pr_err("Device failed to respond within %d poweroff "
    > -                              "time. Forcefully powering down the device\n",
    > +                       pr_err("Device failed to respond within %d poweroff time. Forcefully powering down the device.\n",
    >                               timeout);
    >
    >                /* Set the card state to no notification after the poweroff */
    > @@ -1642,8 +1642,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
    >        cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
    >        err = mmc_wait_for_cmd(card->host, &cmd, 0);
    >        if (err) {
    > -               pr_err("mmc_erase: group start error %d, "
    > -                      "status %#x\n", err, cmd.resp[0]);
    > +               pr_err("mmc_erase: group start error %d, status %#x\n",
    > +                      err, cmd.resp[0]);
    >                err = -EIO;
    >                goto out;
    >        }
    > @@ -1688,7 +1688,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
    >                err = mmc_wait_for_cmd(card->host, &cmd, 0);
    >                if (err || (cmd.resp[0] & 0xFDF92000)) {
    >                        pr_err("error %d requesting status %#x\n",
    > -                               err, cmd.resp[0]);
    > +                              err, cmd.resp[0]);
    >                        err = -EIO;
    >                        goto out;
    >                }
    > @@ -2245,7 +2245,7 @@ int mmc_flush_cache(struct mmc_card *card)
    >                                EXT_CSD_FLUSH_CACHE, 1, 0);
    >                if (err)
    >                        pr_err("%s: cache flush error %d\n",
    > -                                       mmc_hostname(card->host), err);
    > +                              mmc_hostname(card->host), err);
    >        }
    >
    >        return err;
    > @@ -2275,9 +2275,9 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
    >                                        EXT_CSD_CACHE_CTRL, enable, 0);
    >                if (err)
    >                        pr_err("%s: cache %s error %d\n",
    > -                                       mmc_hostname(card->host),
    > -                                       enable ? "on" : "off",
    > -                                       err);
    > +                              mmc_hostname(card->host),
    > +                              enable ? "on" : "off",
    > +                              err);
    >                else
    >                        card->ext_csd.cache_ctrl = enable;
    >        }
    > diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
    > index 835e86a..7f963c0 100644
    > --- a/drivers/mmc/core/host.c
    > +++ b/drivers/mmc/core/host.c
    > @@ -94,8 +94,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
    >        unsigned long flags;
    >
    >        if (!freq) {
    > -               pr_debug("%s: frequency set to 0 in disable function, "
    > -                        "this means the clock is already disabled.\n",
    > +               pr_debug("%s: frequency set to 0 in disable function, this means the clock is already disabled\n",
    >                         mmc_hostname(host));
    >                return;
    >        }
    > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
    > index bbd7adb..f6db788 100644
    > --- a/drivers/mmc/core/mmc.c
    > +++ b/drivers/mmc/core/mmc.c
    > @@ -196,8 +196,8 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
    >         */
    >        ext_csd = kmalloc(512, GFP_KERNEL);
    >        if (!ext_csd) {
    > -               pr_err("%s: could not allocate a buffer to "
    > -                       "receive the ext_csd.\n", mmc_hostname(card->host));
    > +               pr_err("%s: could not allocate a buffer to receive the ext_csd\n",
    > +                      mmc_hostname(card->host));
    >                return -ENOMEM;
    >        }
    >
    > @@ -218,10 +218,8 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
    >                 * stored in their CSD.
    >                 */
    >                if (card->csd.capacity == (4096 * 512)) {
    > -                       pr_err("%s: unable to read EXT_CSD "
    > -                               "on a possible high capacity card. "
    > -                               "Card will be ignored.\n",
    > -                               mmc_hostname(card->host));
    > +                       pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
    > +                              mmc_hostname(card->host));
    >                } else {
    >                        pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
    >                                mmc_hostname(card->host));
    > @@ -251,9 +249,9 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
    >        card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
    >        if (card->csd.structure == 3) {
    >                if (card->ext_csd.raw_ext_csd_structure > 2) {
    > -                       pr_err("%s: unrecognised EXT_CSD structure "
    > -                               "version %d\n", mmc_hostname(card->host),
    > -                                       card->ext_csd.raw_ext_csd_structure);
    > +                       pr_err("%s: unrecognised EXT_CSD structure version %d\n",
    > +                              mmc_hostname(card->host),
    > +                              card->ext_csd.raw_ext_csd_structure);
    >                        err = -EINVAL;
    >                        goto out;
    >                }
    > @@ -984,8 +982,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
    >                        err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
    >                                                    ext_csd);
    >                        if (err)
    > -                               pr_err("%s: power class selection to "
    > -                                      "bus width %d failed\n",
    > +                               pr_err("%s: power class selection to bus width %d failed\n",
    >                                       mmc_hostname(card->host),
    >                                       1 << bus_width);
    >
    > @@ -1015,8 +1012,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
    >                        err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
    >                                                    ext_csd);
    >                        if (err)
    > -                               pr_err("%s: power class selection to "
    > -                                      "bus width %d ddr %d failed\n",
    > +                               pr_err("%s: power class selection to bus width %d ddr %d failed\n",
    >                                       mmc_hostname(card->host),
    >                                       1 << bus_width, ddr);
    >
    > diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
    > index 32deb3e..7c7388c 100644
    > --- a/drivers/mmc/core/mmc_ops.c
    > +++ b/drivers/mmc/core/mmc_ops.c
    > @@ -569,9 +569,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
    >
    >        err = mmc_wait_for_cmd(card->host, &cmd, 0);
    >        if (err) {
    > -               pr_warn("%s: error %d interrupting operation. "
    > -                       "HPI command response %#x\n", mmc_hostname(card->host),
    > -                       err, cmd.resp[0]);
    > +               pr_warn("%s: error %d interrupting operation. HPI command response %#x\n",
    > +                       mmc_hostname(card->host), err, cmd.resp[0]);
    >                return err;
    >        }
    >        if (status)
    > diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
    > index 52a1563..1492b7b 100644
    > --- a/drivers/mmc/core/sd.c
    > +++ b/drivers/mmc/core/sd.c
    > @@ -10,6 +10,8 @@
    >  * published by the Free Software Foundation.
    >  */
    >
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/err.h>
    >  #include <linux/slab.h>
    >  #include <linux/stat.h>
    > @@ -283,9 +285,8 @@ static int mmc_read_switch(struct mmc_card *card)
    >
    >        status = kmalloc(64, GFP_KERNEL);
    >        if (!status) {
    > -               pr_err("%s: could not allocate a buffer for "
    > -                       "switch capabilities.\n",
    > -                       mmc_hostname(card->host));
    > +               pr_err("%s: could not allocate a buffer for switch capabilities\n",
    > +                      mmc_hostname(card->host));
    >                return -ENOMEM;
    >        }
    >
    > @@ -299,7 +300,7 @@ static int mmc_read_switch(struct mmc_card *card)
    >                if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
    >                        goto out;
    >
    > -               pr_warn("%s: problem reading Bus Speed modes.\n",
    > +               pr_warn("%s: problem reading Bus Speed modes\n",
    >                        mmc_hostname(card->host));
    >                err = 0;
    >
    > @@ -381,8 +382,8 @@ int mmc_sd_switch_hs(struct mmc_card *card)
    >
    >        status = kmalloc(64, GFP_KERNEL);
    >        if (!status) {
    > -               pr_err("%s: could not allocate a buffer for "
    > -                       "switch capabilities.\n", mmc_hostname(card->host));
    > +               pr_err("%s: could not allocate a buffer for switch capabilities\n",
    > +                      mmc_hostname(card->host));
    >                return -ENOMEM;
    >        }
    >
    > @@ -391,7 +392,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
    >                goto out;
    >
    >        if ((status[16] & 0xF) != 1) {
    > -               pr_warn("%s: Problem switching card into high-speed mode!\n",
    > +               pr_warn("%s: problem switching card into high-speed mode!\n",
    >                        mmc_hostname(card->host));
    >                err = 0;
    >        } else {
    > @@ -456,7 +457,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
    >                return err;
    >
    >        if ((status[15] & 0xF) != drive_strength) {
    > -               pr_warn("%s: Problem setting drive strength!\n",
    > +               pr_warn("%s: problem setting drive strength!\n",
    >                        mmc_hostname(card->host));
    >                return 0;
    >        }
    > @@ -535,7 +536,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
    >                return err;
    >
    >        if ((status[16] & 0xF) != card->sd_bus_speed)
    > -               pr_warn("%s: Problem setting bus speed mode!\n",
    > +               pr_warn("%s: problem setting bus speed mode!\n",
    >                        mmc_hostname(card->host));
    >        else {
    >                mmc_set_timing(card->host, timing);
    > @@ -597,7 +598,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
    >                return err;
    >
    >        if (((status[15] >> 4) & 0x0F) != current_limit)
    > -               pr_warn("%s: Problem setting current limit!\n",
    > +               pr_warn("%s: problem setting current limit!\n",
    >                        mmc_hostname(card->host));
    >
    >        return 0;
    > @@ -619,8 +620,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
    >
    >        status = kmalloc(64, GFP_KERNEL);
    >        if (!status) {
    > -               pr_err("%s: could not allocate a buffer for "
    > -                       "switch capabilities.\n", mmc_hostname(card->host));
    > +               pr_err("%s: could not allocate a buffer for switch capabilities\n",
    > +                      mmc_hostname(card->host));
    >                return -ENOMEM;
    >        }
    >
    > diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
    > index 3d82f12..57ce052 100644
    > --- a/drivers/mmc/core/sdio_bus.c
    > +++ b/drivers/mmc/core/sdio_bus.c
    > @@ -11,6 +11,8 @@
    >  * SDIO function driver model
    >  */
    >
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/device.h>
    >  #include <linux/err.h>
    >  #include <linux/export.h>
    > diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
    > index 8f6f5ac..7c87732 100644
    > --- a/drivers/mmc/core/sdio_io.c
    > +++ b/drivers/mmc/core/sdio_io.c
    > @@ -9,6 +9,8 @@
    >  * your option) any later version.
    >  */
    >
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/export.h>
    >  #include <linux/mmc/host.h>
    >  #include <linux/mmc/card.h>
    > @@ -65,7 +67,7 @@ int sdio_enable_func(struct sdio_func *func)
    >        BUG_ON(!func);
    >        BUG_ON(!func->card);
    >
    > -       pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func));
    > +       pr_debug("Enabling device %s...\n", sdio_func_id(func));
    >
    >        ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, &reg);
    >        if (ret)
    > @@ -90,12 +92,12 @@ int sdio_enable_func(struct sdio_func *func)
    >                        goto err;
    >        }
    >
    > -       pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func));
    > +       pr_debug("Enabled device %s\n", sdio_func_id(func));
    >
    >        return 0;
    >
    >  err:
    > -       pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func));
    > +       pr_debug("Failed to enable device %s\n", sdio_func_id(func));
    >        return ret;
    >  }
    >  EXPORT_SYMBOL_GPL(sdio_enable_func);
    > @@ -115,7 +117,7 @@ int sdio_disable_func(struct sdio_func *func)
    >        BUG_ON(!func);
    >        BUG_ON(!func->card);
    >
    > -       pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func));
    > +       pr_debug("Disabling device %s...\n", sdio_func_id(func));
    >
    >        ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, &reg);
    >        if (ret)
    > @@ -127,12 +129,12 @@ int sdio_disable_func(struct sdio_func *func)
    >        if (ret)
    >                goto err;
    >
    > -       pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func));
    > +       pr_debug("Disabled device %s\n", sdio_func_id(func));
    >
    >        return 0;
    >
    >  err:
    > -       pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func));
    > +       pr_debug("Failed to disable device %s\n", sdio_func_id(func));
    >        return -EIO;
    >  }
    >  EXPORT_SYMBOL_GPL(sdio_disable_func);
    > diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
    > index bc9e67a..533d0e5 100644
    > --- a/drivers/mmc/core/sdio_irq.c
    > +++ b/drivers/mmc/core/sdio_irq.c
    > @@ -13,6 +13,8 @@
    >  * your option) any later version.
    >  */
    >
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/kernel.h>
    >  #include <linux/sched.h>
    >  #include <linux/kthread.h>
    > @@ -47,7 +49,7 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
    >        ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
    >        if (ret) {
    >                pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
    > -                      mmc_card_id(card), ret);
    > +                        mmc_card_id(card), ret);
    >                return ret;
    >        }
    >
    > @@ -233,10 +235,10 @@ int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
    >        BUG_ON(!func);
    >        BUG_ON(!func->card);
    >
    > -       pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
    > +       pr_debug("Enabling IRQ for %s...\n", sdio_func_id(func));
    >
    >        if (func->irq_handler) {
    > -               pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
    > +               pr_debug("IRQ for %s already in use\n", sdio_func_id(func));
    >                return -EBUSY;
    >        }
    >
    > @@ -276,7 +278,7 @@ int sdio_release_irq(struct sdio_func *func)
    >        BUG_ON(!func);
    >        BUG_ON(!func->card);
    >
    > -       pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
    > +       pr_debug("Disabling IRQ for %s...\n", sdio_func_id(func));
    >
    >        if (func->irq_handler) {
    >                func->irq_handler = NULL;
    > diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
    > index f437c3e..d63f453 100644
    > --- a/drivers/mmc/host/at91_mci.c
    > +++ b/drivers/mmc/host/at91_mci.c
    > @@ -968,8 +968,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
    >                if (at91mci_is_mci1rev2xx())
    >                        mmc->caps |= MMC_CAP_4_BIT_DATA;
    >                else
    > -                       dev_warn(&pdev->dev, "4 wire bus mode not supported"
    > -                               " - using 1 wire\n");
    > +                       dev_warn(&pdev->dev, "4 wire bus mode not supported - using 1 wire\n");
    >        }
    >
    >        host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE,
    > diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
    > index dbd0c8a..cfd325d 100644
    > --- a/drivers/mmc/host/au1xmmc.c
    > +++ b/drivers/mmc/host/au1xmmc.c
    > @@ -32,6 +32,8 @@
    >  * (the low to high transition will not occur).
    >  */
    >
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/module.h>
    >  #include <linux/init.h>
    >  #include <linux/platform_device.h>
    > @@ -54,10 +56,11 @@
    >  /* #define DEBUG */
    >
    >  #ifdef DEBUG
    > -#define DBG(fmt, idx, args...) \
    > -       pr_debug("au1xmmc(%d): DEBUG: " fmt, idx, ##args)
    > +#define DBG(idx, fmt, ...)                                     \
    > +       pr_debug("(%d): DEBUG: " fmt, idx, ##__VA_ARGS__)
    >  #else
    > -#define DBG(fmt, idx, args...) do {} while (0)
    > +#define DBG(idx, fmt, ...)                                     \
    > +       no_printk(fmt, ##__VA_ARGS__)
    >  #endif
    >
    >  /* Hardware definitions */
    > @@ -277,8 +280,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
    >                mmccmd |= SD_CMD_RT_3;
    >                break;
    >        default:
    > -               pr_info("au1xmmc: unhandled response type %02x\n",
    > -                       mmc_resp_type(cmd));
    > +               pr_info("unhandled response type %02x\n", mmc_resp_type(cmd));
    >                return -EINVAL;
    >        }
    >
    > @@ -478,19 +480,19 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
    >                        break;
    >
    >                if (status & SD_STATUS_RC) {
    > -                       DBG("RX CRC Error [%d + %d].\n", host->pdev->id,
    > -                                       host->pio.len, count);
    > +                       DBG(host->pdev->id, "RX CRC Error [%d + %d]\n",
    > +                           host->pio.len, count);
    >                        break;
    >                }
    >
    >                if (status & SD_STATUS_RO) {
    > -                       DBG("RX Overrun [%d + %d]\n", host->pdev->id,
    > -                                       host->pio.len, count);
    > +                       DBG(host->pdev->id, "RX Overrun [%d + %d]\n",
    > +                           host->pio.len, count);
    >                        break;
    >                }
    >                else if (status & SD_STATUS_RU) {
    > -                       DBG("RX Underrun [%d + %d]\n", host->pdev->id,
    > -                                       host->pio.len,  count);
    > +                       DBG(host->pdev->id, "RX Underrun [%d + %d]\n",
    > +                           host->pio.len, count);
    >                        break;
    >                }
    >
    > @@ -835,8 +837,7 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
    >                        au1xmmc_receive_pio(host);
    >
    >        } else if (status & 0x203F3C70) {
    > -                       DBG("Unhandled status %8.8x\n", host->pdev->id,
    > -                               status);
    > +                       DBG(host->pdev->id, "Unhandled status %8.8x\n", status);
    >        }
    >
    >        au_writel(status, HOST_STATUS(host));
    > @@ -1050,7 +1051,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
    >        if (has_dbdma()) {
    >                ret = au1xmmc_dbdma_init(host);
    >                if (ret)
    > -                       pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
    > +                       pr_info("DBDMA init failed; using PIO\n");
    >        }
    >
    >  #ifdef CONFIG_LEDS_CLASS
    > @@ -1075,8 +1076,8 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
    >
    >        platform_set_drvdata(pdev, host);
    >
    > -       pr_info(DRIVER_NAME ": MMC Controller %d set up at %8.8X"
    > -               " (mode=%s)\n", pdev->id, host->iobase,
    > +       pr_info("MMC Controller %d set up at %8.8X (mode=%s)\n",
    > +               pdev->id, host->iobase,
    >                host->flags & HOST_F_DMA ? "dma" : "pio");
    >
    >        return 0;       /* all ok */
    > @@ -1206,7 +1207,7 @@ static int __init au1xmmc_init(void)
    >                */
    >                memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
    >                if (!memid)
    > -                       pr_err("au1xmmc: cannot add memory dbdma\n");
    > +                       pr_err("cannot add memory dbdma\n");
    >        }
    >        return platform_driver_register(&au1xmmc_driver);
    >  }
    > diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
    > index 0371bf5..780a1eb 100644
    > --- a/drivers/mmc/host/bfin_sdh.c
    > +++ b/drivers/mmc/host/bfin_sdh.c
    > @@ -162,8 +162,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
    >                        host->sg_cpu[i].cfg = dma_cfg;
    >                        host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
    >                        host->sg_cpu[i].x_modify = 4;
    > -                       dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
    > -                               "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
    > +                       dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
    >                                i, host->sg_cpu[i].start_addr,
    >                                host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
    >                                host->sg_cpu[i].x_modify);
    > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
    > index 3aaeb08..5d34c01 100644
    > --- a/drivers/mmc/host/dw_mmc.c
    > +++ b/drivers/mmc/host/dw_mmc.c
    > @@ -554,8 +554,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
    >                        div = (host->bus_hz  / slot->clock) >> 1;
    >
    >                dev_info(&slot->mmc->class_dev,
    > -                        "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
    > -                        " div = %d)\n", slot->id, host->bus_hz, slot->clock,
    > +                        "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
    > +                        slot->id, host->bus_hz, slot->clock,
    >                         div ? ((host->bus_hz / div) >> 1) : host->bus_hz, div);
    >
    >                /* disable clock */
    > @@ -942,8 +942,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
    >                                        data->error = -ETIMEDOUT;
    >                                } else {
    >                                        dev_err(&host->pdev->dev,
    > -                                               "data FIFO error "
    > -                                               "(status=%08x)\n",
    > +                                               "data FIFO error (status=%08x)\n",
    >                                                status);
    >                                        data->error = -EIO;
    >                                }
    > @@ -1776,8 +1775,8 @@ static void dw_mci_init_dma(struct dw_mci *host)
    >
    >        if (host->dma_ops->init) {
    >                if (host->dma_ops->init(host)) {
    > -                       dev_err(&host->pdev->dev, "%s: Unable to initialize "
    > -                               "DMA Controller.\n", __func__);
    > +                       dev_err(&host->pdev->dev, "%s: Unable to initialize DMA Controller\n",
    > +                               __func__);
    >                        goto no_dma;
    >                }
    >        } else {
    > @@ -1985,9 +1984,8 @@ static int dw_mci_probe(struct platform_device *pdev)
    >                   DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
    >        mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
    >
    > -       dev_info(&pdev->dev, "DW MMC controller at irq %d, "
    > -                "%d bit host data width, "
    > -                "%u deep fifo\n",
    > +       dev_info(&pdev->dev,
    > +       "DW MMC controller at irq %d, %d bit host data width, %u deep fifo\n",
    >                 irq, width, fifo_size);
    I think that tab is needed this "DW MMC controller at irq ...." ?
    >        if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
    >                dev_info(&pdev->dev, "Internal DMAC interrupt fix enabled.\n");
    > diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
    > index 92946b8..f77899f 100644
    > --- a/drivers/mmc/host/mmc_spi.c
    > +++ b/drivers/mmc/host/mmc_spi.c
    > @@ -860,9 +860,9 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
    >
    >                be16_to_cpus(&scratch->crc_val);
    >                if (scratch->crc_val != crc) {
    > -                       dev_dbg(&spi->dev, "read - crc error: crc_val=0x%04x, "
    > -                                       "computed=0x%04x len=%d\n",
    > -                                       scratch->crc_val, crc, t->len);
    > +                       dev_dbg(&spi->dev,
    > +                               "read - crc error: crc_val=0x%04x, computed=0x%04x len=%d\n",
    > +                               scratch->crc_val, crc, t->len);
    >                        return -EILSEQ;
    >                }
    >        }
    > @@ -1253,8 +1253,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
    >                                mres = spi_setup(host->spi);
    >                                if (mres < 0)
    >                                        dev_dbg(&host->spi->dev,
    > -                                               "switch back to SPI mode 3"
    > -                                               " failed\n");
    > +                                               "switch back to SPI mode 3 failed\n");
    >                        }
    >                }
    >
    > diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
    > index 0ea9935..33b3cd1 100644
    > --- a/drivers/mmc/host/mmci.c
    > +++ b/drivers/mmc/host/mmci.c
    > @@ -1229,8 +1229,7 @@ static int __devinit mmci_probe(struct amba_device *dev,
    >                        host->mmc->ocr_avail = (u32) mask;
    >                        if (plat->ocr_mask)
    >                                dev_warn(&dev->dev,
    > -                                "Provided ocr_mask/setpower will not be used "
    > -                                "(using regulator instead)\n");
    > +"Provided ocr_mask/setpower will not be used (using regulator instead)\n");
    >                }
    >        }
    >  #endif
    > diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
    > index 211a495..93012a0 100644
    > --- a/drivers/mmc/host/mvsdio.c
    > +++ b/drivers/mmc/host/mvsdio.c
    > @@ -84,9 +84,9 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
    >                        hw_state = mvsd_read(MVSD_HW_STATE);
    >                        count++;
    >                } while (!(hw_state & (1 << 13)));
    > -               dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit "
    > -                                  "(hw=0x%04x, count=%d, jiffies=%ld)\n",
    > -                                  hw_state, count, jiffies - (t - HZ));
    > +               dev_dbg(host->dev,
    > +"*** wait for FIFO_EMPTY bit (hw=0x%04x, count=%d, jiffies=%ld)\n",
    > +                       hw_state, count, jiffies - (t - HZ));
    >        }
    >
    >        /* If timeout=0 then maximum timeout index is used. */
    > @@ -117,10 +117,9 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
    >                host->pio_size = data->blocks * data->blksz;
    >                host->pio_ptr = sg_virt(data->sg);
    >                if (!nodma)
    > -                       pr_debug("%s: fallback to PIO for data "
    > -                                         "at 0x%p size %d\n",
    > -                                         mmc_hostname(host->mmc),
    > -                                         host->pio_ptr, host->pio_size);
    > +                       pr_debug("%s: fallback to PIO for data at 0x%p size %d\n",
    > +                                mmc_hostname(host->mmc),
    > +                                host->pio_ptr, host->pio_size);
    >                return 1;
    >        } else {
    >                dma_addr_t phys_addr;
    > @@ -489,9 +488,9 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
    >        if (irq_handled)
    >                return IRQ_HANDLED;
    >
    > -       pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
    > -                       "pio=%d\n", mmc_hostname(host->mmc), intr_status,
    > -                       host->intr_en, host->pio_size);
    > +       pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
    > +              mmc_hostname(host->mmc), intr_status,
    > +              host->intr_en, host->pio_size);
    >        return IRQ_NONE;
    >  }
    >
    > @@ -505,13 +504,13 @@ static void mvsd_timeout_timer(unsigned long data)
    >        spin_lock_irqsave(&host->lock, flags);
    >        mrq = host->mrq;
    >        if (mrq) {
    > -               pr_err("%s: Timeout waiting for hardware interrupt.\n",
    > -                               mmc_hostname(host->mmc));
    > -               pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
    > -                               "intr_en=0x%04x\n", mmc_hostname(host->mmc),
    > -                               mvsd_read(MVSD_HW_STATE),
    > -                               mvsd_read(MVSD_NOR_INTR_STATUS),
    > -                               mvsd_read(MVSD_NOR_INTR_EN));
    > +               pr_err("%s: Timeout waiting for hardware interrupt\n",
    > +                      mmc_hostname(host->mmc));
    > +               pr_err("%s: hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
    > +                      mmc_hostname(host->mmc),
    > +                      mvsd_read(MVSD_HW_STATE),
    > +                      mvsd_read(MVSD_NOR_INTR_STATUS),
    > +                      mvsd_read(MVSD_NOR_INTR_EN));
    >
    >                host->mrq = NULL;
    >
    > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
    > index 1455bd6..dd5159b 100644
    > --- a/drivers/mmc/host/omap_hsmmc.c
    > +++ b/drivers/mmc/host/omap_hsmmc.c
    > @@ -1264,9 +1264,8 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
    >        host->reqs_blocked = 0;
    >        if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
    >                if (host->protect_card) {
    > -                       pr_info("%s: cover is closed, "
    > -                                        "card is now accessible\n",
    > -                                        mmc_hostname(host->mmc));
    > +                       pr_info("%s: cover is closed, card is now accessible\n",
    > +                               mmc_hostname(host->mmc));
    >                        host->protect_card = 0;
    >                }
    >        } else {
    > @@ -1967,8 +1966,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
    >
    >                if (host->got_dbclk)
    >                        if (clk_enable(host->dbclk) != 0)
    > -                               dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
    > -                                                       " clk failed\n");
    > +                               dev_dbg(mmc_dev(host->mmc), "Enabling debounce clk failed\n");
    >        }
    >
    >        /* Since we do only SG emulation, we can have as many segs
    > @@ -2169,8 +2167,7 @@ static int omap_hsmmc_suspend(struct device *dev)
    >                                                        host->slot_id);
    >                        if (ret) {
    >                                dev_dbg(mmc_dev(host->mmc),
    > -                                       "Unable to handle MMC board"
    > -                                       " level suspend\n");
    > +                                       "Unable to handle MMC board level suspend\n");
    >                                host->suspended = 0;
    >                                return ret;
    >                        }
    > diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
    > index 6878a94..67c5751 100644
    > --- a/drivers/mmc/host/sdhci-pci.c
    > +++ b/drivers/mmc/host/sdhci-pci.c
    > @@ -460,8 +460,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
    >
    >                if (sd_dev) {
    >                        pci_dev_put(sd_dev);
    > -                       dev_info(&chip->pdev->dev, "Refusing to bind to "
    > -                               "secondary interface.\n");
    > +                       dev_info(&chip->pdev->dev, "Refusing to bind to secondary interface\n");
    >                        return -ENODEV;
    >                }
    >        }
    > @@ -628,10 +627,10 @@ static int syskt_probe_slot(struct sdhci_pci_slot *slot)
    >
    >        u8 board_rev = readb(slot->host->ioaddr + SYSKT_BOARD_REV);
    >        u8  chip_rev = readb(slot->host->ioaddr + SYSKT_CHIP_REV);
    > -       dev_info(&slot->chip->pdev->dev, "SysKonnect CardBus2SDIO, "
    > -                                        "board rev %d.%d, chip rev %d.%d\n",
    > -                                        board_rev >> 4, board_rev & 0xf,
    > -                                        chip_rev >> 4,  chip_rev & 0xf);
    > +       dev_info(&slot->chip->pdev->dev,
    > +                "SysKonnect CardBus2SDIO, board rev %d.%d, chip rev %d.%d\n",
    > +                board_rev >> 4, board_rev & 0xf,
    > +                chip_rev >> 4,  chip_rev & 0xf);
    >        if (chip_rev >= 0x20)
    >                slot->host->quirks |= SDHCI_QUIRK_FORCE_DMA;
    >
    > @@ -925,8 +924,7 @@ static int sdhci_pci_enable_dma(struct sdhci_host *host)
    >        if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) &&
    >                ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
    >                (host->flags & SDHCI_USE_SDMA)) {
    > -               dev_warn(&pdev->dev, "Will use DMA mode even though HW "
    > -                       "doesn't fully claim to support it.\n");
    > +               dev_warn(&pdev->dev, "Will use DMA mode even though HW doesn't fully claim to support it\n");
    >        }
    >
    >        ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
    > @@ -1202,8 +1200,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
    >        }
    >
    >        if (pci_resource_len(pdev, bar) != 0x100) {
    > -               dev_err(&pdev->dev, "Invalid iomem size. You may "
    > -                       "experience problems.\n");
    > +               dev_err(&pdev->dev, "Invalid iomem size. You may experience problems.\n");
    >        }
    >
    >        if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
    > diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
    > index 15673a7..0d8f061 100644
    > --- a/drivers/mmc/host/sdhci-pxav3.c
    > +++ b/drivers/mmc/host/sdhci-pxav3.c
    > @@ -82,11 +82,8 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
    >                        && power_mode == MMC_POWER_ON) {
    >
    >                dev_dbg(mmc_dev(host->mmc),
    > -                               "%s: slot->power_mode = %d,"
    > -                               "ios->power_mode = %d\n",
    > -                               __func__,
    > -                               pxa->power_mode,
    > -                               power_mode);
    > +                               "%s: slot->power_mode = %d, ios->power_mode = %d\n",
    > +                               __func__, pxa->power_mode, power_mode);
    >
    >                /* set we want notice of when 74 clocks are sent */
    >                tmp = readw(host->ioaddr + SD_CE_ATA_2);
    > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
    > index d146bff..d31c31d 100644
    > --- a/drivers/mmc/host/sdhci.c
    > +++ b/drivers/mmc/host/sdhci.c
    > @@ -13,6 +13,8 @@
    >  *     - JMicron (hardware and technical support)
    >  */
    >
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/delay.h>
    >  #include <linux/highmem.h>
    >  #include <linux/io.h>
    > @@ -32,8 +34,8 @@
    >
    >  #define DRIVER_NAME "sdhci"
    >
    > -#define DBG(f, x...) \
    > -       pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
    > +#define DBG(fmt, ...)                                          \
    > +       pr_debug("[%s()]: " fmt, __func__, ##__VA_ARGS__)
    >
    >  #if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
    >        defined(CONFIG_MMC_SDHCI_MODULE))
    > @@ -68,51 +70,51 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
    >
    >  static void sdhci_dumpregs(struct sdhci_host *host)
    >  {
    > -       pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
    > -               mmc_hostname(host->mmc));
    > -
    > -       pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version:  0x%08x\n",
    > -               sdhci_readl(host, SDHCI_DMA_ADDRESS),
    > -               sdhci_readw(host, SDHCI_HOST_VERSION));
    > -       pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt:  0x%08x\n",
    > -               sdhci_readw(host, SDHCI_BLOCK_SIZE),
    > -               sdhci_readw(host, SDHCI_BLOCK_COUNT));
    > -       pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
    > -               sdhci_readl(host, SDHCI_ARGUMENT),
    > -               sdhci_readw(host, SDHCI_TRANSFER_MODE));
    > -       pr_debug(DRIVER_NAME ": Present:  0x%08x | Host ctl: 0x%08x\n",
    > -               sdhci_readl(host, SDHCI_PRESENT_STATE),
    > -               sdhci_readb(host, SDHCI_HOST_CONTROL));
    > -       pr_debug(DRIVER_NAME ": Power:    0x%08x | Blk gap:  0x%08x\n",
    > -               sdhci_readb(host, SDHCI_POWER_CONTROL),
    > -               sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
    > -       pr_debug(DRIVER_NAME ": Wake-up:  0x%08x | Clock:    0x%08x\n",
    > -               sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
    > -               sdhci_readw(host, SDHCI_CLOCK_CONTROL));
    > -       pr_debug(DRIVER_NAME ": Timeout:  0x%08x | Int stat: 0x%08x\n",
    > -               sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
    > -               sdhci_readl(host, SDHCI_INT_STATUS));
    > -       pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
    > -               sdhci_readl(host, SDHCI_INT_ENABLE),
    > -               sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
    > -       pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
    > -               sdhci_readw(host, SDHCI_ACMD12_ERR),
    > -               sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
    > -       pr_debug(DRIVER_NAME ": Caps:     0x%08x | Caps_1:   0x%08x\n",
    > -               sdhci_readl(host, SDHCI_CAPABILITIES),
    > -               sdhci_readl(host, SDHCI_CAPABILITIES_1));
    > -       pr_debug(DRIVER_NAME ": Cmd:      0x%08x | Max curr: 0x%08x\n",
    > -               sdhci_readw(host, SDHCI_COMMAND),
    > -               sdhci_readl(host, SDHCI_MAX_CURRENT));
    > -       pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
    > -               sdhci_readw(host, SDHCI_HOST_CONTROL2));
    > +       pr_debug("=========== REGISTER DUMP (%s)===========\n",
    > +                mmc_hostname(host->mmc));
    > +
    > +       pr_debug("Sys addr: 0x%08x | Version:  0x%08x\n",
    > +                sdhci_readl(host, SDHCI_DMA_ADDRESS),
    > +                sdhci_readw(host, SDHCI_HOST_VERSION));
    > +       pr_debug("Blk size: 0x%08x | Blk cnt:  0x%08x\n",
    > +                sdhci_readw(host, SDHCI_BLOCK_SIZE),
    > +                sdhci_readw(host, SDHCI_BLOCK_COUNT));
    > +       pr_debug("Argument: 0x%08x | Trn mode: 0x%08x\n",
    > +                sdhci_readl(host, SDHCI_ARGUMENT),
    > +                sdhci_readw(host, SDHCI_TRANSFER_MODE));
    > +       pr_debug("Present:  0x%08x | Host ctl: 0x%08x\n",
    > +                sdhci_readl(host, SDHCI_PRESENT_STATE),
    > +                sdhci_readb(host, SDHCI_HOST_CONTROL));
    > +       pr_debug("Power:    0x%08x | Blk gap:  0x%08x\n",
    > +                sdhci_readb(host, SDHCI_POWER_CONTROL),
    > +                sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
    > +       pr_debug("Wake-up:  0x%08x | Clock:    0x%08x\n",
    > +                sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
    > +                sdhci_readw(host, SDHCI_CLOCK_CONTROL));
    > +       pr_debug("Timeout:  0x%08x | Int stat: 0x%08x\n",
    > +                sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
    > +                sdhci_readl(host, SDHCI_INT_STATUS));
    > +       pr_debug("Int enab: 0x%08x | Sig enab: 0x%08x\n",
    > +                sdhci_readl(host, SDHCI_INT_ENABLE),
    > +                sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
    > +       pr_debug("AC12 err: 0x%08x | Slot int: 0x%08x\n",
    > +                sdhci_readw(host, SDHCI_ACMD12_ERR),
    > +                sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
    > +       pr_debug("Caps:     0x%08x | Caps_1:   0x%08x\n",
    > +                sdhci_readl(host, SDHCI_CAPABILITIES),
    > +                sdhci_readl(host, SDHCI_CAPABILITIES_1));
    > +       pr_debug("Cmd:      0x%08x | Max curr: 0x%08x\n",
    > +                sdhci_readw(host, SDHCI_COMMAND),
    > +                sdhci_readl(host, SDHCI_MAX_CURRENT));
    > +       pr_debug("Host ctl2: 0x%08x\n",
    > +                sdhci_readw(host, SDHCI_HOST_CONTROL2));
    >
    >        if (host->flags & SDHCI_USE_ADMA)
    > -               pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
    > -                      readl(host->ioaddr + SDHCI_ADMA_ERROR),
    > -                      readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
    > +               pr_debug("ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
    > +                        readl(host->ioaddr + SDHCI_ADMA_ERROR),
    > +                        readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
    >
    > -       pr_debug(DRIVER_NAME ": ===========================================\n");
    > +       pr_debug("===========================================\n");
    >  }
    >
    >  /*****************************************************************************\
    > @@ -417,7 +419,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
    >                        break;
    >        }
    >
    > -       DBG("PIO transfer complete.\n");
    > +       DBG("PIO transfer complete\n");
    >  }
    >
    >  static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
    > @@ -745,9 +747,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
    >                if (unlikely(broken)) {
    >                        for_each_sg(data->sg, sg, data->sg_len, i) {
    >                                if (sg->length & 0x3) {
    > -                                       DBG("Reverting to PIO because of "
    > -                                               "transfer size (%d)\n",
    > -                                               sg->length);
    > +                                       DBG("Reverting to PIO because of transfer size (%d)\n",
    > +                                           sg->length);
    >                                        host->flags &= ~SDHCI_REQ_USE_DMA;
    >                                        break;
    >                                }
    > @@ -780,8 +781,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
    >                if (unlikely(broken)) {
    >                        for_each_sg(data->sg, sg, data->sg_len, i) {
    >                                if (sg->offset & 0x3) {
    > -                                       DBG("Reverting to PIO because of "
    > -                                               "bad alignment\n");
    > +                                       DBG("Reverting to PIO because of bad alignment\n");
    >                                        host->flags &= ~SDHCI_REQ_USE_DMA;
    >                                        break;
    >                                }
    > @@ -972,8 +972,8 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
    >
    >        while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
    >                if (timeout == 0) {
    > -                       pr_err("%s: Controller never released "
    > -                               "inhibit bit(s).\n", mmc_hostname(host->mmc));
    > +                       pr_err("%s: Controller never released inhibit bit(s)\n",
    > +                              mmc_hostname(host->mmc));
    >                        sdhci_dumpregs(host);
    >                        cmd->error = -EIO;
    >                        tasklet_schedule(&host->finish_tasklet);
    > @@ -1154,8 +1154,8 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
    >        while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
    >                & SDHCI_CLOCK_INT_STABLE)) {
    >                if (timeout == 0) {
    > -                       pr_err("%s: Internal clock never "
    > -                               "stabilised.\n", mmc_hostname(host->mmc));
    > +                       pr_err("%s: Internal clock never stabilised\n",
    > +                              mmc_hostname(host->mmc));
    >                        sdhci_dumpregs(host);
    >                        return;
    >                }
    > @@ -1592,8 +1592,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
    >                if (!(ctrl & SDHCI_CTRL_VDD_180))
    >                        return 0;
    >                else {
    > -                       pr_info(DRIVER_NAME ": Switching to 3.3V "
    > -                               "signalling voltage failed\n");
    > +                       pr_info("Switching to 3.3V signalling voltage failed\n");
    >                        return -EIO;
    >                }
    >        } else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
    > @@ -1651,8 +1650,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
    >                pwr |= SDHCI_POWER_ON;
    >                sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
    >
    > -               pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
    > -                       "voltage failed, retrying with S18R set to 0\n");
    > +               pr_info("Switching to 1.8V signalling voltage failed, retrying with S18R set to 0\n");
    >                return -EAGAIN;
    >        } else
    >                /* No signal voltage switch required */
    > @@ -1774,10 +1772,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
    >                spin_lock(&host->lock);
    >
    >                if (!host->tuning_done) {
    > -                       pr_info(DRIVER_NAME ": Timeout waiting for "
    > -                               "Buffer Read Ready interrupt during tuning "
    > -                               "procedure, falling back to fixed sampling "
    > -                               "clock\n");
    > +                       pr_info("Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n");
    >                        ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
    >                        ctrl &= ~SDHCI_CTRL_TUNED_CLK;
    >                        ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
    > @@ -1804,9 +1799,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
    >                sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
    >        } else {
    >                if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
    > -                       pr_info(DRIVER_NAME ": Tuning procedure"
    > -                               " failed, falling back to fixed sampling"
    > -                               " clock\n");
    > +                       pr_info("Tuning procedure failed, falling back to fixed sampling clock\n");
    >                        err = -EIO;
    >                }
    >        }
    > @@ -2010,8 +2003,8 @@ static void sdhci_timeout_timer(unsigned long data)
    >        spin_lock_irqsave(&host->lock, flags);
    >
    >        if (host->mrq) {
    > -               pr_err("%s: Timeout waiting for hardware "
    > -                       "interrupt.\n", mmc_hostname(host->mmc));
    > +               pr_err("%s: Timeout waiting for hardware interrupt\n",
    > +                      mmc_hostname(host->mmc));
    >                sdhci_dumpregs(host);
    >
    >                if (host->data) {
    > @@ -2056,9 +2049,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
    >        BUG_ON(intmask == 0);
    >
    >        if (!host->cmd) {
    > -               pr_err("%s: Got command interrupt 0x%08x even "
    > -                       "though no command operation was in progress.\n",
    > -                       mmc_hostname(host->mmc), (unsigned)intmask);
    > +               pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress\n",
    > +                      mmc_hostname(host->mmc), (unsigned)intmask);
    >                sdhci_dumpregs(host);
    >                return;
    >        }
    > @@ -2087,8 +2079,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
    >         */
    >        if (host->cmd->flags & MMC_RSP_BUSY) {
    >                if (host->cmd->data)
    > -                       DBG("Cannot wait for busy signal when also "
    > -                               "doing a data transfer");
    > +                       DBG("Cannot wait for busy signal when also doing a data transfer\n");
    >                else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
    >                        return;
    >
    > @@ -2156,9 +2147,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
    >                        }
    >                }
    >
    > -               pr_err("%s: Got data interrupt 0x%08x even "
    > -                       "though no data operation was in progress.\n",
    > -                       mmc_hostname(host->mmc), (unsigned)intmask);
    > +               pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress\n",
    > +                      mmc_hostname(host->mmc), (unsigned)intmask);
    >                sdhci_dumpregs(host);
    >
    >                return;
    > @@ -2204,10 +2194,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
    >                                ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
    >                                SDHCI_DEFAULT_BOUNDARY_SIZE;
    >                        host->data->bytes_xfered = dmanow - dmastart;
    > -                       DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
    > -                               " next 0x%08x\n",
    > -                               mmc_hostname(host->mmc), dmastart,
    > -                               host->data->bytes_xfered, dmanow);
    > +                       DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
    > +                           mmc_hostname(host->mmc), dmastart,
    > +                           host->data->bytes_xfered, dmanow);
    >                        sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
    >                }
    >
    > @@ -2250,7 +2239,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
    >        }
    >
    >        DBG("*** %s got interrupt: 0x%08x\n",
    > -               mmc_hostname(host->mmc), intmask);
    > +           mmc_hostname(host->mmc), intmask);
    >
    >        if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
    >                u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
    > @@ -2548,9 +2537,8 @@ int sdhci_add_host(struct sdhci_host *host)
    >        host->version = (host->version & SDHCI_SPEC_VER_MASK)
    >                                >> SDHCI_SPEC_VER_SHIFT;
    >        if (host->version > SDHCI_SPEC_300) {
    > -               pr_err("%s: Unknown controller version (%d). "
    > -                       "You may experience problems.\n", mmc_hostname(mmc),
    > -                       host->version);
    > +               pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
    > +                      mmc_hostname(mmc), host->version);
    >        }
    >
    >        caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
    > @@ -2631,8 +2619,8 @@ int sdhci_add_host(struct sdhci_host *host)
    >        if (host->max_clk == 0 || host->quirks &
    >                        SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
    >                if (!host->ops->get_max_clock) {
    > -                       pr_err("%s: Hardware doesn't specify base clock "
    > -                              "frequency.\n", mmc_hostname(mmc));
    > +                       pr_err("%s: Hardware doesn't specify base clock frequency\n",
    > +                              mmc_hostname(mmc));
    >                        return -ENODEV;
    >                }
    >                host->max_clk = host->ops->get_max_clock(host);
    > @@ -2677,8 +2665,8 @@ int sdhci_add_host(struct sdhci_host *host)
    >                        host->timeout_clk = host->ops->get_timeout_clock(host);
    >                } else if (!(host->quirks &
    >                                SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
    > -                       pr_err("%s: Hardware doesn't specify timeout clock "
    > -                              "frequency.\n", mmc_hostname(mmc));
    > +                       pr_err("%s: Hardware doesn't specify timeout clock frequency\n",
    > +                              mmc_hostname(mmc));
    >                        return -ENODEV;
    >                }
    >        }
    > @@ -2845,8 +2833,8 @@ int sdhci_add_host(struct sdhci_host *host)
    >                mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
    >
    >        if (mmc->ocr_avail == 0) {
    > -               pr_err("%s: Hardware doesn't report any "
    > -                       "support voltages.\n", mmc_hostname(mmc));
    > +               pr_err("%s: Hardware doesn't report any support voltages\n",
    > +                      mmc_hostname(mmc));
    >                return -ENODEV;
    >        }
    >
    > @@ -2994,8 +2982,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
    >                host->flags |= SDHCI_DEVICE_DEAD;
    >
    >                if (host->mrq) {
    > -                       pr_err("%s: Controller removed during "
    > -                               " transfer!\n", mmc_hostname(host->mmc));
    > +                       pr_err("%s: Controller removed during transfer!\n",
    > +                              mmc_hostname(host->mmc));
    >
    >                        host->mrq->cmd->error = -ENOMEDIUM;
    >                        tasklet_schedule(&host->finish_tasklet);
    > @@ -3053,9 +3041,8 @@ EXPORT_SYMBOL_GPL(sdhci_free_host);
    >
    >  static int __init sdhci_drv_init(void)
    >  {
    > -       pr_info(DRIVER_NAME
    > -               ": Secure Digital Host Controller Interface driver\n");
    > -       pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
    > +       pr_info("Secure Digital Host Controller Interface driver\n");
    > +       pr_info("Copyright(c) Pierre Ossman\n");
    >
    >        return 0;
    >  }
    > diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
    > index 7009f17..1e30245 100644
    > --- a/drivers/mmc/host/sdricoh_cs.c
    > +++ b/drivers/mmc/host/sdricoh_cs.c
    > @@ -310,8 +310,8 @@ static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
    >
    >        /* transfer data */
    >        if (data && cmd->error == 0) {
    > -               dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i "
    > -                       "sg length %i\n", data->blksz, data->blocks,
    > +               dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i sg length %i\n",
    > +                       data->blksz, data->blocks,
    >                        data->sg_len, data->sg->length);
    >
    >                /* enter data reading mode */
    > @@ -330,8 +330,8 @@ static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
    >                        kunmap(page);
    >                        flush_dcache_page(page);
    >                        if (result) {
    > -                               dev_err(dev, "sdricoh_request: cmd %i "
    > -                                       "block transfer failed\n", cmd->opcode);
    > +                               dev_err(dev, "sdricoh_request: cmd %i block transfer failed\n",
    > +                                       cmd->opcode);
    >                                cmd->error = result;
    >                                break;
    >                        } else
    > @@ -476,8 +476,8 @@ static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev)
    >  {
    >        struct pci_dev *pci_dev = NULL;
    >
    > -       dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
    > -               " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
    > +       dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device %s %s ...\n",
    > +                pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
    >
    >        /* search pci cardbus bridge that contains the mmc controller */
    >        /* the io region is already claimed by yenta_socket... */
    > diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
    > index 55d6c60..d432597 100644
    > --- a/drivers/mmc/host/tifm_sd.c
    > +++ b/drivers/mmc/host/tifm_sd.c
    > @@ -787,9 +787,9 @@ static void tifm_sd_abort(unsigned long data)
    >  {
    >        struct tifm_sd *host = (struct tifm_sd*)data;
    >
    > -       pr_err("%s : card failed to respond for a long period of time "
    > -              "(%x, %x)\n",
    > -              dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags);
    > +       pr_err("%s : card failed to respond for a long period of time (%x, %x)\n",
    > +              dev_name(&host->dev->dev),
    > +              host->req->cmd->opcode, host->cmd_flags);
    >
    >        tifm_eject(host->dev);
    >  }
    > @@ -803,8 +803,7 @@ static void tifm_sd_ios(struct mmc_host *mmc, struct mmc_ios *ios)
    >
    >        spin_lock_irqsave(&sock->lock, flags);
    >
    > -       dev_dbg(&sock->dev, "ios: clock = %u, vdd = %x, bus_mode = %x, "
    > -               "chip_select = %x, power_mode = %x, bus_width = %x\n",
    > +       dev_dbg(&sock->dev, "ios: clock = %u, vdd = %x, bus_mode = %x, chip_select = %x, power_mode = %x, bus_width = %x\n",
    >                ios->clock, ios->vdd, ios->bus_mode, ios->chip_select,
    >                ios->power_mode, ios->bus_width);
    >
    > diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
    > index 4b83c43..dc479b0 100644
    > --- a/drivers/mmc/host/via-sdmmc.c
    > +++ b/drivers/mmc/host/via-sdmmc.c
    > @@ -8,6 +8,8 @@
    >  * your option) any later version.
    >  */
    >
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/pci.h>
    >  #include <linux/module.h>
    >  #include <linux/dma-mapping.h>
    > @@ -838,8 +840,7 @@ static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
    >        BUG_ON(intmask == 0);
    >
    >        if (!host->cmd) {
    > -               pr_err("%s: Got command interrupt 0x%x even "
    > -                      "though no command operation was in progress.\n",
    > +               pr_err("%s: Got command interrupt 0x%x even though no command operation was in progress\n",
    >                       mmc_hostname(host->mmc), intmask);
    >                return;
    >        }
    > @@ -941,8 +942,8 @@ static void via_sdc_timeout(unsigned long ulongdata)
    >        spin_lock_irqsave(&sdhost->lock, flags);
    >
    >        if (sdhost->mrq) {
    > -               pr_err("%s: Timeout waiting for hardware interrupt."
    > -                      "cmd:0x%x\n", mmc_hostname(sdhost->mmc),
    > +               pr_err("%s: Timeout waiting for hardware interrupt.cmd:0x%x\n",
    > +                      mmc_hostname(sdhost->mmc),
    >                       sdhost->mrq->cmd->opcode);
    >
    >                if (sdhost->data) {
    > @@ -1091,8 +1092,7 @@ static int __devinit via_sd_probe(struct pci_dev *pcidev,
    >        u8  gatt;
    >        int ret;
    >
    > -       pr_info(DRV_NAME
    > -               ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
    > +       pr_info("VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
    >                pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
    >                (int)pcidev->revision);
    >
    > @@ -1192,8 +1192,8 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
    >        mmiowb();
    >
    >        if (sdhost->mrq) {
    > -               pr_err("%s: Controller removed during "
    > -                       "transfer\n", mmc_hostname(sdhost->mmc));
    > +               pr_err("%s: Controller removed during transfer\n",
    > +                      mmc_hostname(sdhost->mmc));
    >
    >                /* make sure all DMA is stopped */
    >                writel(VIA_CRDR_DMACTRL_SFTRST,
    > @@ -1225,8 +1225,7 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
    >        pci_release_regions(pcidev);
    >        pci_disable_device(pcidev);
    >
    > -       pr_info(DRV_NAME
    > -               ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
    > +       pr_info("VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
    >                pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
    >  }
    >
    > @@ -1339,8 +1338,7 @@ static struct pci_driver via_sd_driver = {
    >
    >  static int __init via_sd_drv_init(void)
    >  {
    > -       pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver "
    > -               "(C) 2008 VIA Technologies, Inc.\n");
    > +       pr_info("VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.\n");
    >
    >        return pci_register_driver(&via_sd_driver);
    >  }
    > diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
    > index e8f6e65..1908a25 100644
    > --- a/drivers/mmc/host/vub300.c
    > +++ b/drivers/mmc/host/vub300.c
    > @@ -35,6 +35,9 @@
    >  *             bits and driver data fields reflect that limit by using
    >  *             u8, u16, u32
    >  */
    > +
    > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    > +
    >  #include <linux/kernel.h>
    >  #include <linux/errno.h>
    >  #include <linux/init.h>
    > @@ -1257,9 +1260,8 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
    >                        }
    >                } else {
    >                        dev_err(&vub300->udev->dev,
    > -                               "not enough memory for xfer buffer to send"
    > -                               " INTERRUPT_PSEUDOCODE for %s %s\n", fw->data,
    > -                               vub300->vub_name);
    > +                               "not enough memory for xfer buffer to send INTERRUPT_PSEUDOCODE for %s %s\n",
    > +                               fw->data, vub300->vub_name);
    >                        strncpy(vub300->vub_name,
    >                                "SDIO interrupt pseudocode download failed",
    >                                sizeof(vub300->vub_name));
    > @@ -1304,9 +1306,8 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
    >                        }
    >                } else {
    >                        dev_err(&vub300->udev->dev,
    > -                               "not enough memory for xfer buffer to send"
    > -                               " TRANSFER_PSEUDOCODE for %s %s\n", fw->data,
    > -                               vub300->vub_name);
    > +                               "not enough memory for xfer buffer to send TRANSFER_PSEUDOCODE for %s %s\n",
    > +                               fw->data, vub300->vub_name);
    >                        strncpy(vub300->vub_name,
    >                                "SDIO transfer pseudocode download failed",
    >                                sizeof(vub300->vub_name));
    > @@ -2002,11 +2003,11 @@ static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
    >                                USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
    >                                0x00, 0x00, buf, buf_array_size, HZ);
    >        if (retval != 8) {
    > -               dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
    > -                       " %dkHz failed with retval=%d\n", kHzClock, retval);
    > +               dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED %dkHz failed with retval=%d\n",
    > +                       kHzClock, retval);
    >        } else {
    > -               dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED"
    > -                       " %dkHz\n", kHzClock);
    > +               dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED %dkHz\n",
    > +                       kHzClock);
    >        }
    >  }
    >
    > @@ -2251,8 +2252,7 @@ static int vub300_probe(struct usb_interface *interface,
    >                                        endpoint->bEndpointAddress;
    >                        } else {
    >                                dev_warn(&vub300->udev->dev,
    > -                                        "ignoring"
    > -                                        " unexpected bulk_in endpoint");
    > +                                        "ignoring unexpected bulk_in endpoint\n");
    >                        }
    >                } else if (usb_endpoint_is_bulk_out(endpoint)) {
    >                        if (!vub300->cmnd_out_ep) {
    > @@ -2263,20 +2263,18 @@ static int vub300_probe(struct usb_interface *interface,
    >                                        endpoint->bEndpointAddress;
    >                        } else {
    >                                dev_warn(&vub300->udev->dev,
    > -                                        "ignoring"
    > -                                        " unexpected bulk_out endpoint");
    > +                                        "ignoring unexpected bulk_out endpoint\n");
    >                        }
    >                } else {
    >                        dev_warn(&vub300->udev->dev,
    > -                                "vub300 ignoring EndPoint(%d) %02X", i,
    > -                                endpoint->bEndpointAddress);
    > +                                "vub300 ignoring EndPoint(%d) %02X\n",
    > +                                i, endpoint->bEndpointAddress);
    >                }
    >        }
    >        if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
    >            vub300->data_inp_ep && vub300->data_out_ep) {
    >                dev_info(&vub300->udev->dev,
    > -                        "vub300 %s packets"
    > -                        " using EndPoints %02X %02X %02X %02X\n",
    > +                        "vub300 %s packets using EndPoints %02X %02X %02X %02X\n",
    >                         vub300->large_usb_packets ? "LARGE" : "SMALL",
    >                         vub300->cmnd_out_ep, vub300->cmnd_res_ep,
    >                         vub300->data_out_ep, vub300->data_inp_ep);
    > @@ -2341,13 +2339,11 @@ static int vub300_probe(struct usb_interface *interface,
    >        add_timer(&vub300->inactivity_timer);
    >        if (vub300->card_present)
    >                dev_info(&vub300->udev->dev,
    > -                        "USB vub300 remote SDIO host controller[%d]"
    > -                        "connected with SD/SDIO card inserted\n",
    > +                        "USB vub300 remote SDIO host controller[%d]connected with SD/SDIO card inserted\n",
    >                         interface_to_InterfaceNumber(interface));
    >        else
    >                dev_info(&vub300->udev->dev,
    > -                        "USB vub300 remote SDIO host controller[%d]"
    > -                        "connected with no SD/SDIO card inserted\n",
    > +                        "USB vub300 remote SDIO host controller[%d]connected with no SD/SDIO card inserted\n",
    >                         interface_to_InterfaceNumber(interface));
    >        mmc_add_host(mmc);
    >        return 0;
    > @@ -2381,8 +2377,8 @@ static void vub300_disconnect(struct usb_interface *interface)
    >                        vub300->interface = NULL;
    >                        kref_put(&vub300->kref, vub300_delete);
    >                        mmc_remove_host(mmc);
    > -                       pr_info("USB vub300 remote SDIO host controller[%d]"
    > -                               " now disconnected", ifnum);
    > +                       pr_info("USB remote SDIO host controller[%d] now disconnected\n",
    > +                               ifnum);
    >                        return;
    >                }
    >        }
    > @@ -2448,29 +2444,29 @@ static int __init vub300_init(void)
    >  {                              /* NOT irq */
    >        int result;
    >
    > -       pr_info("VUB300 Driver rom wait states = %02X irqpoll timeout = %04X",
    > +       pr_info("Driver rom wait states = %02X irqpoll timeout = %04X\n",
    >                firmware_rom_wait_states, 0x0FFFF & firmware_irqpoll_timeout);
    >        cmndworkqueue = create_singlethread_workqueue("kvub300c");
    >        if (!cmndworkqueue) {
    > -               pr_err("not enough memory for the REQUEST workqueue");
    > +               pr_err("not enough memory for the REQUEST workqueue\n");
    >                result = -ENOMEM;
    >                goto out1;
    >        }
    >        pollworkqueue = create_singlethread_workqueue("kvub300p");
    >        if (!pollworkqueue) {
    > -               pr_err("not enough memory for the IRQPOLL workqueue");
    > +               pr_err("not enough memory for the IRQPOLL workqueue\n");
    >                result = -ENOMEM;
    >                goto out2;
    >        }
    >        deadworkqueue = create_singlethread_workqueue("kvub300d");
    >        if (!deadworkqueue) {
    > -               pr_err("not enough memory for the EXPIRED workqueue");
    > +               pr_err("not enough memory for the EXPIRED workqueue\n");
    >                result = -ENOMEM;
    >                goto out3;
    >        }
    >        result = usb_register(&vub300_driver);
    >        if (result) {
    > -               pr_err("usb_register failed. Error number %d", result);
    > +               pr_err("usb_register failed. Error number %d\n", result);
    >                goto out4;
    >        }
    >        return 0;
    > diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
    > index deaed8c..7536b50 100644
    > --- a/drivers/mmc/host/wbsd.c
    > +++ b/drivers/mmc/host/wbsd.c
    > @@ -721,9 +721,8 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
    >                 * Any leftover data?
    >                 */
    >                if (count) {
    > -                       pr_err("%s: Incomplete DMA transfer. "
    > -                               "%d bytes left.\n",
    > -                               mmc_hostname(host->mmc), count);
    > +                       pr_err("%s: Incomplete DMA transfer. %d bytes left.\n",
    > +                              mmc_hostname(host->mmc), count);
    >
    >                        if (!data->error)
    >                                data->error = -EIO;
    > --
    > 1.7.6.405.gc1be0
    >
    > --
    > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    > the body of a message to majordomo@vger.kernel.org
    > More majordomo info at  http://vger.kernel.org/majordomo-info.html
    > Please read the FAQ at  http://www.tux.org/lkml/
    >
    \
     
     \ /
      Last update: 2011-11-16 02:51    [W:0.219 / U:153.128 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site