lkml.org 
[lkml]   [2011]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] MFD: TWL: add power off functionality
Date
TWL family of PMICs, used in master mode, have a power off
functionality. The resulting power off sequence shuts down all the SoC
supplies, LDOs, etc. The sequence is described in the datasheets
chapter "Power-Off Sequence".
Note, that board must be wired correctly for the power off to work as
expected.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
---
drivers/mfd/twl4030-power.c | 42 ++++++++++++++++++++++++++++++++++++++++--
include/linux/i2c/twl.h | 2 ++
2 files changed, 42 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index a764676..d905f51 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -34,7 +34,8 @@
static u8 twl4030_start_script_address = 0x2b;

#define PWR_P1_SW_EVENTS 0x10
-#define PWR_DEVOFF (1<<0)
+#define PWR_DEVOFF (1 << 0)
+#define SEQ_OFFSYNC (1 << 0)

#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b)
@@ -511,12 +512,27 @@ int twl4030_remove_script(u8 flags)
return err;
}

+/*
+ * In master mode, start the power off sequence.
+ * After a successful execution, TWL shuts down the power to the SoC
+ * and all peripherals connected to it.
+ */
+void twl4030_power_off(void)
+{
+ int err;
+
+ err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, PWR_DEVOFF,
+ TWL4030_PM_MASTER_P1_SW_EVENTS);
+ if (err)
+ pr_err("TWL4030 Unable to power off\n");
+}
+
void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
{
int err = 0;
int i;
struct twl4030_resconfig *resconfig;
- u8 address = twl4030_start_script_address;
+ u8 val, address = twl4030_start_script_address;

err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
TWL4030_PM_MASTER_KEY_CFG1,
@@ -548,6 +564,28 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
}
}

+ /* Board has to be wired properly to use this feature */
+ if (twl4030_scripts->use_poweroff && !pm_power_off) {
+ /* Default for SEQ_OFFSYNC is set, lets ensure this */
+ err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &val,
+ TWL4030_PM_MASTER_CFG_P123_TRANSITION);
+ if (err) {
+ pr_warning("TWL4030 Unable to read registers\n");
+
+ } else if (!(val & SEQ_OFFSYNC)) {
+ val |= SEQ_OFFSYNC;
+ err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, val,
+ TWL4030_PM_MASTER_CFG_P123_TRANSITION);
+ if (err) {
+ pr_err("TWL4030 Unable to setup SEQ_OFFSYNC\n");
+ goto relock;
+ }
+ }
+
+ pm_power_off = twl4030_power_off;
+ }
+
+relock:
err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0,
TWL4030_PM_MASTER_PROTECT_KEY);
if (err)
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 114c0f6..78d3465 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -652,10 +652,12 @@ struct twl4030_power_data {
unsigned num;
struct twl4030_resconfig *resource_config;
#define TWL4030_RESCONFIG_UNDEF ((u8)-1)
+ bool use_poweroff; /* Board is wired for TWL poweroff */
};

extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
extern int twl4030_remove_script(u8 flags);
+extern void twl4030_power_off(void);

struct twl4030_codec_data {
unsigned int digimic_delay; /* in ms */
--
1.7.3.4


\
 
 \ /
  Last update: 2011-11-13 10:53    [W:0.121 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site