lkml.org 
[lkml]   [2011]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2] net-forcedeth: Add internal loopback support for forcedeth NICs.
Date
Support enabling/disabling/querying internal loopback mode for
forcedeth NICs using ethtool.

Signed-off-by: Sanjay Hortikar <horti@google.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
---
drivers/net/ethernet/nvidia/forcedeth.c | 156 ++++++++++++++++++++++++++++++-
1 files changed, 155 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index d24c45b..e8a5ae3 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -3003,6 +3003,73 @@ static void nv_update_pause(struct net_device *dev, u32 pause_flags)
}
}

+static void nv_force_linkspeed(struct net_device *dev, int speed, int duplex)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+ u32 phyreg, txreg;
+ int mii_status;
+
+ np->linkspeed = NVREG_LINKSPEED_FORCE|speed;
+ np->duplex = duplex;
+
+ /* see if gigabit phy */
+ mii_status = mii_rw(dev, np->phyaddr, MII_BMSR, MII_READ);
+ if (mii_status & PHY_GIGABIT) {
+ np->gigabit = PHY_GIGABIT;
+ phyreg = readl(base + NvRegSlotTime);
+ phyreg &= ~(0x3FF00);
+ if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_10)
+ phyreg |= NVREG_SLOTTIME_10_100_FULL;
+ else if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_100)
+ phyreg |= NVREG_SLOTTIME_10_100_FULL;
+ else if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_1000)
+ phyreg |= NVREG_SLOTTIME_1000_FULL;
+ writel(phyreg, base + NvRegSlotTime);
+ }
+
+ phyreg = readl(base + NvRegPhyInterface);
+ phyreg &= ~(PHY_HALF|PHY_100|PHY_1000);
+ if (np->duplex == 0)
+ phyreg |= PHY_HALF;
+ if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_100)
+ phyreg |= PHY_100;
+ else if ((np->linkspeed & NVREG_LINKSPEED_MASK) ==
+ NVREG_LINKSPEED_1000)
+ phyreg |= PHY_1000;
+ writel(phyreg, base + NvRegPhyInterface);
+
+ if (phyreg & PHY_RGMII) {
+ if ((np->linkspeed & NVREG_LINKSPEED_MASK) ==
+ NVREG_LINKSPEED_1000)
+ txreg = NVREG_TX_DEFERRAL_RGMII_1000;
+ else
+ txreg = NVREG_TX_DEFERRAL_RGMII_10_100;
+ } else {
+ txreg = NVREG_TX_DEFERRAL_DEFAULT;
+ }
+ writel(txreg, base + NvRegTxDeferral);
+
+ if (np->desc_ver == DESC_VER_1) {
+ txreg = NVREG_TX_WM_DESC1_DEFAULT;
+ } else {
+ if ((np->linkspeed & NVREG_LINKSPEED_MASK) ==
+ NVREG_LINKSPEED_1000)
+ txreg = NVREG_TX_WM_DESC2_3_1000;
+ else
+ txreg = NVREG_TX_WM_DESC2_3_DEFAULT;
+ }
+ writel(txreg, base + NvRegTxWatermark);
+
+ writel(NVREG_MISC1_FORCE | (np->duplex ? 0 : NVREG_MISC1_HD),
+ base + NvRegMisc1);
+ pci_push(base);
+ writel(np->linkspeed, base + NvRegLinkSpeed);
+ pci_push(base);
+
+ return;
+}
+
/**
* nv_update_linkspeed: Setup the MAC according to the link partner
* @dev: Network device to be configured
@@ -3024,11 +3091,25 @@ static int nv_update_linkspeed(struct net_device *dev)
int newls = np->linkspeed;
int newdup = np->duplex;
int mii_status;
+ u32 bmcr;
int retval = 0;
u32 control_1000, status_1000, phyreg, pause_flags, txreg;
u32 txrxFlags = 0;
u32 phy_exp;

+ /* If device loopback is enabled, set carrier on and enable max link
+ * speed.
+ */
+ bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
+ if (bmcr & BMCR_LOOPBACK) {
+ if (netif_running(dev)) {
+ nv_force_linkspeed(dev, NVREG_LINKSPEED_1000, 1);
+ if (!netif_carrier_ok(dev))
+ netif_carrier_on(dev);
+ }
+ return 1;
+ }
+
/* BMSR_LSTATUS is latched, read it twice:
* we want the current value.
*/
@@ -4455,6 +4536,61 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*
return 0;
}

+static int nv_set_loopback(struct net_device *dev, u32 features)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ unsigned long flags;
+ u32 miicontrol;
+ int err, retval = 0;
+
+ spin_lock_irqsave(&np->lock, flags);
+ miicontrol = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
+ if (features & NETIF_F_LOOPBACK) {
+ if (miicontrol & BMCR_LOOPBACK) {
+ spin_unlock_irqrestore(&np->lock, flags);
+ netdev_info(dev, "Loopback already enabled\n");
+ return 0;
+ }
+ nv_disable_irq(dev);
+ /* Turn on loopback mode */
+ miicontrol |= BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
+ err = mii_rw(dev, np->phyaddr, MII_BMCR, miicontrol);
+ if (err) {
+ retval = PHY_ERROR;
+ spin_unlock_irqrestore(&np->lock, flags);
+ phy_init(dev);
+ } else {
+ if (netif_running(dev)) {
+ /* Force 1000 Mbps full-duplex */
+ nv_force_linkspeed(dev, NVREG_LINKSPEED_1000,
+ 1);
+ /* Force link up */
+ netif_carrier_on(dev);
+ }
+ spin_unlock_irqrestore(&np->lock, flags);
+ netdev_info(dev,
+ "Internal PHY loopback mode enabled.\n");
+ }
+ } else {
+ if (!(miicontrol & BMCR_LOOPBACK)) {
+ spin_unlock_irqrestore(&np->lock, flags);
+ netdev_info(dev, "Loopback already disabled\n");
+ return 0;
+ }
+ nv_disable_irq(dev);
+ /* Turn off loopback */
+ spin_unlock_irqrestore(&np->lock, flags);
+ netdev_info(dev, "Internal PHY loopback mode disabled.\n");
+ phy_init(dev);
+ }
+ msleep(500);
+ spin_lock_irqsave(&np->lock, flags);
+ nv_enable_irq(dev);
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ return retval;
+}
+
static u32 nv_fix_features(struct net_device *dev, u32 features)
{
/* vlan is dependent on rx checksum offload */
@@ -4490,6 +4626,13 @@ static int nv_set_features(struct net_device *dev, u32 features)
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
u32 changed = dev->features ^ features;
+ int retval;
+
+ if ((changed & NETIF_F_LOOPBACK) && netif_running(dev)) {
+ retval = nv_set_loopback(dev, features);
+ if (retval != 0)
+ return retval;
+ }

if (changed & NETIF_F_RXCSUM) {
spin_lock_irq(&np->lock);
@@ -5124,6 +5267,12 @@ static int nv_open(struct net_device *dev)

spin_unlock_irq(&np->lock);

+ /* If the loopback feature was set while the device was down, make sure
+ * that it's set correctly now.
+ */
+ if (dev->features & NETIF_F_LOOPBACK)
+ nv_set_loopback(dev, dev->features);
+
return 0;
out_drain:
nv_drain_rxtx(dev);
@@ -5328,6 +5477,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i

dev->features |= dev->hw_features;

+ /* Add loopback capability to the device. */
+ dev->hw_features |= NETIF_F_LOOPBACK;
+
np->pause_flags = NV_PAUSEFRAME_RX_CAPABLE | NV_PAUSEFRAME_RX_REQ | NV_PAUSEFRAME_AUTONEG;
if ((id->driver_data & DEV_HAS_PAUSEFRAME_TX_V1) ||
(id->driver_data & DEV_HAS_PAUSEFRAME_TX_V2) ||
@@ -5603,12 +5755,14 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
dev_info(&pci_dev->dev, "ifname %s, PHY OUI 0x%x @ %d, addr %pM\n",
dev->name, np->phy_oui, np->phyaddr, dev->dev_addr);

- dev_info(&pci_dev->dev, "%s%s%s%s%s%s%s%s%s%sdesc-v%u\n",
+ dev_info(&pci_dev->dev, "%s%s%s%s%s%s%s%s%s%s%sdesc-v%u\n",
dev->features & NETIF_F_HIGHDMA ? "highdma " : "",
dev->features & (NETIF_F_IP_CSUM | NETIF_F_SG) ?
"csum " : "",
dev->features & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX) ?
"vlan " : "",
+ dev->features & (NETIF_F_LOOPBACK) ?
+ "loopback " : "",
id->driver_data & DEV_HAS_POWER_CNTRL ? "pwrctl " : "",
id->driver_data & DEV_HAS_MGMT_UNIT ? "mgmt " : "",
id->driver_data & DEV_NEED_TIMERIRQ ? "timirq " : "",
--
1.7.3.1


\
 
 \ /
  Last update: 2011-11-12 03:41    [W:0.052 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site