lkml.org 
[lkml]   [2011]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/16] mtd/docg3: add OOB layout to mtdinfo
Date
Add OOB layout description for docg3, so that userspace can
use this information to setup the data for write_oob().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

---
Since V1: added ECC oobavail field for OOB auto placement
---
drivers/mtd/devices/docg3.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 6eca7f6..27c4fea 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -63,6 +63,20 @@
*
*/

+/**
+ * struct docg3_oobinfo - DiskOnChip G3 OOB layout
+ * @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC)
+ * @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
+ * @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
+ * @oobavail: 8 available bytes remaining after ECC toll
+ */
+static struct nand_ecclayout docg3_oobinfo = {
+ .eccbytes = 8,
+ .eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
+ .oobfree = {{0, 7}, {15, 1} },
+ .oobavail = 8,
+};
+
static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
{
u8 val = readb(docg3->base + reg);
@@ -973,6 +987,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
mtd->write_oob = NULL;
mtd->sync = NULL;
mtd->block_isbad = doc_block_isbad;
+ mtd->ecclayout = &docg3_oobinfo;
}

/**
--
1.7.5.4


\
 
 \ /
  Last update: 2011-11-10 09:09    [from the cache]
©2003-2011 Jasper Spaans