lkml.org 
[lkml]   [2011]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[027/262] PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823
3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josh Boyer <jwboyer@redhat.com>

commit 3e309cdf07c930f29a4e0f233e47d399bea34c68 upstream.

Commit 15bed0f2f added a quirk for the e823 Ricoh card reader to lower the
base frequency. However, the quirk first checks to see if the proprietary
MMC controller is disabled, and returns if so. On some devices, such as the
Lenovo X220, the MMC controller is already disabled by firmware it seems,
but the frequency change is still needed so sdhci-pci can talk to the cards.
Since the MMC controller is disabled, the frequency fixup was never being run
on these machines.

This moves the e823 check above the MMC controller check so that it always
gets run.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=722509

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/pci/quirks.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struc
/* disable must be done via function #0 */
if (PCI_FUNC(dev->devfn))
return;
-
- pci_read_config_byte(dev, 0xCB, &disable);
-
- if (disable & 0x02)
- return;
-
- pci_read_config_byte(dev, 0xCA, &write_enable);
- pci_write_config_byte(dev, 0xCA, 0x57);
- pci_write_config_byte(dev, 0xCB, disable | 0x02);
- pci_write_config_byte(dev, 0xCA, write_enable);
-
- dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
- dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
-
/*
* RICOH 0xe823 SD/MMC card reader fails to recognize
* certain types of SD/MMC cards. Lowering the SD base
@@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struc

dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
}
+
+ pci_read_config_byte(dev, 0xCB, &disable);
+
+ if (disable & 0x02)
+ return;
+
+ pci_read_config_byte(dev, 0xCA, &write_enable);
+ pci_write_config_byte(dev, 0xCA, 0x57);
+ pci_write_config_byte(dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(dev, 0xCA, write_enable);
+
+ dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+ dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);



\
 
 \ /
  Last update: 2011-11-10 06:31    [W:0.588 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site