lkml.org 
[lkml]   [2011]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mv_sas: OCZ RevoDrive3 & zDrive R4 support
Date
From: "Robin H. Johnson" <robbat2@gentoo.org>

In the OCZ RevoDrive3/zDrive R4 series, the "OCZ SuperScale Storage
Controller" with "Virtualized Controller Architecture 2.0" really seems
to be a Marvell 88SE9485 part, with OCZ firmware/BIOS.

Developed and tested on OCZ RevoDrive3 120GB [PCI 1b85:1021]

Should work on:
- OCZ RevoDrive3 (2x SandForce 2281)
- OCZ RevoDrive3 X2 (4x SandForce 2281)
- OCZ zDrive R4 CM84 (4x SandForce 2281)
- OCZ zDrive R4 CM88 (8x SandForce 2281)
- OCZ zDrive R4 RM84 (4x SandForce 2582)
- OCZ zDrive R4 RM88 (8x SandForce 2582)

All of this because a friend recently bought a OCZ RevoDrive3 and was
bitten by the lack of Linux support.

Notes from testing:
-------------------
- SMART works.
- VPD Device Identification is "OCZ-REVODRIVE3"
- Thin provisioning/TRIM seems to be implemented as WRITE SAME UNMAP,
with deterministic (non-zero) read after TRIM, but I'm not sure if it
works 100% in my testing.
- Some of the tuning in the firmware seems to ensure much better
performance when in a RAID0 setup than using the two devices
seperately.

I have not tested booting from the SSD, because all of this was
developed and tested remotely from the actual hardware.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Thanks-To: Gordon Pritchard <gordp@sfu.ca>
---
drivers/scsi/mvsas/mv_init.c | 10 ++++++++++
include/linux/pci_ids.h | 2 ++
2 files changed, 12 insertions(+), 0 deletions(-)

Tested and cleaned up now :-). Please apply.

diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 4e9af66..b88315a 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -723,6 +723,16 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = {
.class_mask = 0,
.driver_data = chip_9485,
},
+ { PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */
+ { PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1041), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1042), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1043), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1044), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1080), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1083), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */
+ { PCI_VDEVICE(OCZ, 0x1084), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */

{ } /* terminate list */
};
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ae96bbe..3fe46e9 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2868,3 +2868,5 @@

#define PCI_VENDOR_ID_XEN 0x5853
#define PCI_DEVICE_ID_XEN_PLATFORM 0x0001
+
+#define PCI_VENDOR_ID_OCZ 0x1b85
--
1.7.7


\
 
 \ /
  Last update: 2011-10-09 05:49    [W:0.065 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site