lkml.org 
[lkml]   [2011]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3]Fix typos in the kernel
where you interested in picking these up or not?

On 09/14/2011 12:52 PM, Justin P. Mattock wrote:
> From: "Justin P. Mattock"<justinmattock@gmail.com>
>
> The below patch fixes some typos that I have found in the kernel.
> Note:not sure if I am able to send this, due to kernel.org being down.
>
> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
>
> ---
> arch/arm/mach-omap2/smartreflex.c | 2 +-
> arch/arm/plat-omap/include/plat/serial.h | 4 ++--
> arch/powerpc/include/asm/io.h | 2 +-
> arch/powerpc/include/asm/keylargo.h | 2 +-
> arch/powerpc/mm/numa.c | 2 +-
> arch/powerpc/platforms/embedded6xx/storcenter.c | 2 +-
> arch/sparc/kernel/smp_64.c | 4 ++--
> drivers/acpi/acpica/hwxface.c | 2 +-
> drivers/base/regmap/regmap.c | 2 +-
> drivers/block/xen-blkback/xenbus.c | 2 +-
> drivers/char/ipmi/ipmi_bt_sm.c | 2 +-
> drivers/edac/ppc4xx_edac.c | 2 +-
> drivers/media/video/zoran/zoran_driver.c | 2 +-
> 13 files changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
> index 34c01a7..f49804f 100644
> --- a/arch/arm/mach-omap2/smartreflex.c
> +++ b/arch/arm/mach-omap2/smartreflex.c
> @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
> * driver register and sr device intializtion API's. Only one call
> * will ultimately succeed.
> *
> - * Currently this function registers interrrupt handler for a particular SR
> + * Currently this function registers interrupt handler for a particular SR
> * if smartreflex class driver is already registered and has
> * requested for interrupts and the SR interrupt line in present.
> */
> diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
> index de3b10c..c457b6a 100644
> --- a/arch/arm/plat-omap/include/plat/serial.h
> +++ b/arch/arm/plat-omap/include/plat/serial.h
> @@ -2,7 +2,7 @@
> * arch/arm/plat-omap/include/mach/serial.h
> *
> * Copyright (C) 2009 Texas Instruments
> - * Addded OMAP4 support- Santosh Shilimkar<santosh.shilimkar@ti.com>
> + * Added OMAP4 support- Santosh Shilimkar<santosh.shilimkar@ti.com>
> *
> * This program is distributed in the hope that it will be useful,
> * but WITHOUT ANY WARRANTY; without even the implied warranty of
> @@ -24,7 +24,7 @@
> *
> * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
> * uncompress code could then partially overwrite itself
> - * 2. We assume printascii is called at least once before paging_init,
> + * 2. We assume print ascii is called at least once before paging_init,
> * and addruart has a chance to read OMAP_UART_INFO
> */
> #define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc)
> diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
> index 45698d5..2fd3645 100644
> --- a/arch/powerpc/include/asm/io.h
> +++ b/arch/powerpc/include/asm/io.h
> @@ -394,7 +394,7 @@ __do_out_asm(_rec_outl, "stwbrx")
> #endif /* CONFIG_PPC32 */
>
> /* The "__do_*" operations below provide the actual "base" implementation
> - * for each of the defined acccessor. Some of them use the out_* functions
> + * for each of the defined accessor. Some of them use the out_* functions
> * directly, some of them still use EEH, though we might change that in the
> * future. Those macros below provide the necessary argument swapping and
> * handling of the IO base for PIO.
> diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h
> index d8520ef..01b1ae4 100644
> --- a/arch/powerpc/include/asm/keylargo.h
> +++ b/arch/powerpc/include/asm/keylargo.h
> @@ -51,7 +51,7 @@
>
> #define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05)
>
> -/* Hrm... this one is only to be used on Pismo. It seeem to also
> +/* Hrm... this one is only to be used on Pismo. It seem's to also
> * control the timebase enable on other machines. Still to be
> * experimented... --BenH.
> */
> diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
> index 2164006..ef2674d 100644
> --- a/arch/powerpc/mm/numa.c
> +++ b/arch/powerpc/mm/numa.c
> @@ -511,7 +511,7 @@ static int of_get_assoc_arrays(struct device_node *memory,
> aa->n_arrays = *prop++;
> aa->array_sz = *prop++;
>
> - /* Now that we know the number of arrrays and size of each array,
> + /* Now that we know the number of arrays and size of each array,
> * revalidate the size of the property read in.
> */
> if (len< (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
> diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
> index 613070e..f1eebca 100644
> --- a/arch/powerpc/platforms/embedded6xx/storcenter.c
> +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
> @@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
> }
>
> /*
> - * Interrupt setup and service. Interrrupts on the turbostation come
> + * Interrupt setup and service. Interrupts on the turbostation come
> * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
> */
> static void __init storcenter_init_IRQ(void)
> diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
> index 4a442c3..0101eea 100644
> --- a/arch/sparc/kernel/smp_64.c
> +++ b/arch/sparc/kernel/smp_64.c
> @@ -840,9 +840,9 @@ static void tsb_sync(void *info)
> struct trap_per_cpu *tp =&trap_block[raw_smp_processor_id()];
> struct mm_struct *mm = info;
>
> - /* It is not valid to test "currrent->active_mm == mm" here.
> + /* It is not valid to test "current->active_mm == mm" here.
> *
> - * The value of "current" is not changed atomically with
> + * The value of "current" is not changed automatically with
> * switch_mm(). But that's OK, we just need to check the
> * current cpu's trap block PGD physical address.
> */
> diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
> index f75f81a..f34ba22 100644
> --- a/drivers/acpi/acpica/hwxface.c
> +++ b/drivers/acpi/acpica/hwxface.c
> @@ -355,7 +355,7 @@ ACPI_EXPORT_SYMBOL(acpi_read_bit_register)
> *
> * PARAMETERS: register_id - ID of ACPI Bit Register to access
> * Value - Value to write to the register, in bit
> - * position zero. The bit is automaticallly
> + * position zero. The bit is automatically
> * shifted to the correct position.
> *
> * RETURN: Status
> diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
> index 0eef4da..d6217d2 100644
> --- a/drivers/base/regmap/regmap.c
> +++ b/drivers/base/regmap/regmap.c
> @@ -309,7 +309,7 @@ static int _regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
>
> /*
> * Some buses flag reads by setting the high bits in the
> - * register addresss; since it's always the high bits for all
> + * register address; since it's always the high bits for all
> * current formats we can do this here rather than in
> * formatting. This may break if we get interesting formats.
> */
> diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
> index 3f129b4..c092368 100644
> --- a/drivers/block/xen-blkback/xenbus.c
> +++ b/drivers/block/xen-blkback/xenbus.c
> @@ -582,7 +582,7 @@ static void frontend_changed(struct xenbus_device *dev,
> case XenbusStateConnected:
> /*
> * Ensure we connect even when two watches fire in
> - * close successsion and we miss the intermediate value
> + * close succession and we miss the intermediate value
> * of frontend_state.
> */
> if (dev->state == XenbusStateConnected)
> diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
> index 3ed20e8..cdd4c09f 100644
> --- a/drivers/char/ipmi/ipmi_bt_sm.c
> +++ b/drivers/char/ipmi/ipmi_bt_sm.c
> @@ -560,7 +560,7 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
> BT_CONTROL(BT_H_BUSY); /* set */
>
> /*
> - * Uncached, ordered writes should just proceeed serially but
> + * Uncached, ordered writes should just proceed serially but
> * some BMCs don't clear B2H_ATN with one hit. Fast-path a
> * workaround without too much penalty to the general case.
> */
> diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
> index 0de7d87..032a9c6 100644
> --- a/drivers/edac/ppc4xx_edac.c
> +++ b/drivers/edac/ppc4xx_edac.c
> @@ -142,7 +142,7 @@
>
> /*
> * The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are
> - * indirectly acccessed and have a base and length defined by the
> + * indirectly accessed and have a base and length defined by the
> * device tree. The base can be anything; however, we expect the
> * length to be precisely two registers, the first for the address
> * window and the second for the data window.
> diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
> index d4d05d2..c624403 100644
> --- a/drivers/media/video/zoran/zoran_driver.c
> +++ b/drivers/media/video/zoran/zoran_driver.c
> @@ -1550,7 +1550,7 @@ static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)
> if (zoran_formats[i].flags& flag&& num++ == fmt->index) {
> strncpy(fmt->description, zoran_formats[i].name,
> sizeof(fmt->description) - 1);
> - /* fmt struct pre-zeroed, so adding '\0' not neeed */
> + /* fmt struct pre-zeroed, so adding '\0' not need */
> fmt->pixelformat = zoran_formats[i].fourcc;
> if (zoran_formats[i].flags& ZORAN_FORMAT_COMPRESSED)
> fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;



\
 
 \ /
  Last update: 2011-10-07 03:31    [from the cache]
©2003-2011 Jasper Spaans