lkml.org 
[lkml]   [2011]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux-next-20110923: warning kernel/rcutree.c:1833
On Thu, Oct 06, 2011 at 02:11:28PM +0200, Frederic Weisbecker wrote:
> On Wed, Oct 05, 2011 at 05:58:58PM -0700, Paul E. McKenney wrote:
> > On Mon, Oct 03, 2011 at 09:30:36AM -0700, Paul E. McKenney wrote:
> > > On Mon, Oct 03, 2011 at 03:03:48PM +0200, Frederic Weisbecker wrote:
> > > > On Sun, Oct 02, 2011 at 05:32:47PM -0700, Paul E. McKenney wrote:
> > > > > > > -void rcu_irq_enter(void)
> > > > > > > +int rcu_is_cpu_idle(void)
> > > > > > > {
> > > > > > > - rcu_exit_nohz();
> > > > > > > + return (atomic_read(&__get_cpu_var(rcu_dynticks).dynticks) & 0x1) == 0;
> > > > > > > }
> > > > > >
> > > > > > So that's not used in this patch but it's interesting for me
> > > > > > to backport "rcu: Detect illegal rcu dereference in extended quiescent state".
> > > > >
> > > > > Yep, that is why it is there.
> > > >
> > > > Ok.
> > > >
> > > > >
> > > > > > The above should be read from a preempt disabled section though
> > > > > > (remember "rcu: Fix preempt-unsafe debug check of rcu extended quiescent state")
> > > > >
> > > > > Yes, and that is why the last line of the header comment reads "The
> > > > > caller must have at least disabled preemption." Disabling preemption
> > > > > is not necessary in Tiny RCU because there is no other CPU for the task
> > > > > to go to. (Right?)
> > > >
> > > > Right.
> > > >
> > > > > > Those functions should probably lay in a separate patch. But I don't mind
> > > > > > much keeping the things as is and use these APIs in my next patches though.
> > > > > > I'll just fix the preempt enabled thing above.
> > > > >
> > > > > Or were you saying that you wish to make calls to rcu_is_cpu_idle()
> > > > > that have preemption enabled?
> > > >
> > > > Yeah. That's going to be called from places like rcu_read_lock_held()
> > > > and things like this that don't need to disable preemption themselves.
> > > >
> > > > Would be better to disable preemption from that function.
> > >
> > > Hmmm... This might be a good use for the "drive-by" per-CPU access
> > > functions.
> > >
> > > No, that doesn't work. We could pick up the pointer, switch to another
> > > CPU, the original CPU could run a task that blocks before we start running,
> > > and then we could incorrectly decide that we were running in idle context,
> > > issuing a spurious warning. This approach would only work in environments
> > > that (unlike the Linux kernel) mapped all the per-CPU variables to the
> > > same virtual address on all CPUs. (DYNIX/ptx did this, but this leads
> > > to other problems, like being unable to reasonably access other CPUs'
> > > variables. Double mapping has other issues on some architectures.)
> > >
> > > OK, agreed. I will make this function disable preemption.
> > >
> > > > > And I can split the patch easily enough while keeping the diff the same,
> > > > > so you should be able to do your porting on top of the existing code.
> > > >
> > > > No I'm actually pretty fine with the current state. Whether that's defined
> > > > in this patch or a following one is actually not important.
> > >
> > > Fair enough!
> >
> > And here is an update that might handle an irq entry/exit miscounting
> > problem. Thanks to Arjan van de Ven for pointing out that my earlier
> > approach would in fact miscount irq entries/exits in face of things like
> > upcalls to user-mode helpers.
>
> I'm not sure what you mean. How could the current state miscount in user-mode?

It appears that some sorts of upcalls to userspace can have an irq_exit()
without a matching irq_enter(), as shown by the stack trace below. This
splat was generated by some code in rcu_idle_enter() that complains when
a non-idle task tries to become idle.

One possibility that I am considering is to have ____call_usermodehelper()
set a task-structure flag just before the call to kernel_execve(), and
to have rcu_idle_enter() check that flag, and, if set, zero the flag
and just return without doing anything. I don't claim to understand
the code well enough to know whether this really works, though.

Thanx, Paul

------------------------------------------------------------------------

[ 0.373084] WARNING: at kernel/rcutree.c:398
[ 0.373089] Modules linked in:
[ 0.373097] NIP: c0000000000d3c4c LR: c0000000000d3c34 CTR: 0000000000000000
[ 0.373106] REGS: c000000042212f50 TRAP: 0700 Not tainted (3.1.0-rc8-autokern1)
[ 0.373114] MSR: 8000000000021032 <ME,CE,IR,DR> CR: 48008022 XER: 00000000
[ 0.373134] CFAR: c000000000053340
[ 0.373140] TASK = c0000000421f2640[5] 'kworker/u:0' THREAD: c000000042210000 CPU: 1
[ 0.373149] GPR00: 0000000000000001 c0000000422131d0 c000000000a1a7c0 0000000000000000
[ 0.373165] GPR04: 0000000000000001 c000000008123d50 0000000004000000 0000000000000000
[ 0.373182] GPR08: 0000000000000001 c000000000a8809d c0000000008f9520 c000000000a47d58
[ 0.373198] GPR12: 8000000000009032 c000000007578280 0000000002080000 c0000000007b89d8
[ 0.373214] GPR16: c0000000007b5078 0000000000000000 0000000000000000 0000000000000000
[ 0.373231] GPR20: c000000042213a00 c000000000940480 c0000000428076a0 c000000042807600
[ 0.373247] GPR24: c000000042807600 0000000000000040 c0000000009405f0 0000000000000000
[ 0.373263] GPR28: 0000000000000001 0000000000000001 c0000000009991b0 0000000000000001
[ 0.373284] NIP [c0000000000d3c4c] .rcu_idle_exit+0x1f4/0x248
[ 0.373293] LR [c0000000000d3c34] .rcu_idle_exit+0x1dc/0x248
[ 0.373300] Call Trace:
[ 0.373306] [c0000000422131d0] [c0000000000d3c28] .rcu_idle_exit+0x1d0/0x248 (unreliable)
[ 0.373319] [c000000042213270] [c00000000006f8d4] .irq_enter+0x20/0x88
[ 0.373330] [c0000000422132f0] [c00000000001b264] .timer_interrupt+0x150/0x2d0
[ 0.373341] [c000000042213390] [c0000000000038a4] decrementer_common+0x124/0x180
[ 0.373354] --- Exception: 901 at .dup_fd+0x1a0/0x2d8
[ 0.373355] LR = .dup_fd+0x160/0x2d8
[ 0.373365] [c000000042213680] [c000000000172678] .dup_fd+0xf8/0x2d8 (unreliable)
[ 0.373378] [c000000042213750] [c000000000065f2c] .copy_process+0x64c/0x115c
[ 0.373388] [c000000042213840] [c000000000066f4c] .do_fork+0x118/0x338
[ 0.373399] [c000000042213920] [c0000000000134d8] .sys_clone+0x5c/0x74
[ 0.373409] [c000000042213990] [c000000000009914] .ppc_clone+0x8/0xc
[ 0.373421] --- Exception: c00 at .kernel_thread+0x28/0x70
[ 0.373423] LR = .__call_usermodehelper+0x68/0xf0
[ 0.373433] [c000000042213c80] [c000000042213d10] 0xc000000042213d10 (unreliable)
[ 0.373445] [c000000042213cf0] [c000000042213d80] 0xc000000042213d80
[ 0.373455] [c000000042213d80] [c000000000086394] .process_one_work+0x2e8/0x4d0
[ 0.373467] [c000000042213e40] [c000000000089484] .worker_thread+0x1b0/0x2f4
[ 0.373477] [c000000042213ed0] [c000000000091bf8] .kthread+0xb4/0xc0
[ 0.373488] [c000000042213f90] [c00000000001de90] .kernel_thread+0x54/0x70
[ 0.373497] Instruction dump:
[ 0.373502] 485117d9 60000000 482428bd 60000000 7c6307b4 4bf7f711 60000000 2fa30000
[ 0.373523] 40be0028 e93e8300 88090000 68000001 <0b000000> 2fa00000 41be0010 e93e8300
[ 0.373549] ---[ end trace 75d2b1226921d2ff ]---


\
 
 \ /
  Last update: 2011-10-06 20:47    [W:0.065 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site