lkml.org 
[lkml]   [2011]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants
On Thu, Oct 27, 2011 at 09:59:49PM +0200, Stephen Warren wrote:
> Peter De Schrijver wrote at Tuesday, October 25, 2011 10:54 AM:
> > This patch modifies the pinmux code to be useable for multiple tegra variants.
> > Some tegra20 specific constants will be replaced by variables which will be
> > initialized to the appropriate value at runtime.
>
> You should probably also mention:
> * Removal of include of pinmux-t2.h from pinmux.h.
> * The file renames you performed and why.
> * The removal of the suspend/resume code and why.
>
> > diff --git a/arch/arm/mach-tegra/include/mach/pinmux-t2.h b/arch/arm/mach-tegra/include/mach/pinmux-t2.h
> > deleted file mode 100644
> > index 4c26263..0000000
> > --- a/arch/arm/mach-tegra/include/mach/pinmux-t2.h
> > +++ /dev/null
>
> So this file shows up as a delete and an add. Isn't there a way to get
> it to show up as a rename; I've certainly seen git diff tell me that, but
> I'm not sure if the same feature is available for format-patch. In
> particular, IIRC from internal review, there weren't any changes to this
> file besides direct fallout from the rename, but there were quite a few
> symbol name changes in pinmux-t2-tables.c, and also the removal of
> suspend/resume, which it'd be nice if the diff highlighted.
>

Hmm. Maybe if I split it in 2 patches? 2 rename and 1 modification?

> > diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h
> > index bb7dfdb..8f6e9f3 100644
> > --- a/arch/arm/mach-tegra/include/mach/pinmux.h
> > +++ b/arch/arm/mach-tegra/include/mach/pinmux.h
> ...
> > @@ -219,13 +213,20 @@ struct tegra_pingroup_desc {
> > s8 pupd_bit; /* offset into the PULL_UPDOWN_REG_* register bit */
> > };
> >
> > -extern const struct tegra_pingroup_desc tegra_soc_pingroups[];
> > -extern const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[];
> > +struct tegra_pinmux_pm {
> > + void (*suspend)(void);
> > + void (*resume)(void);
> > +};
>
> Since we elected to strip out suspend/resume (it's currently incomplete
> anyway) to simplify the addition of Tegra30, I don't think you need that
> struct type any more.
>

True :)

> I wonder if removal of the suspend/resume functions should have been a
> separate patch before this?
>

Good point.

> > diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
> > index 1d20165..0789122 100644
> > --- a/arch/arm/mach-tegra/pinmux.c
> > +++ b/arch/arm/mach-tegra/pinmux.c
> > @@ -21,6 +21,9 @@
> > #include <linux/spinlock.h>
> > #include <linux/io.h>
> > #include <linux/platform_device.h>
> > +#ifdef CONFIG_OF
> > +#include <linux/of_platform.h>
> > +#endif
>
> I think just include that without any ifdef.
>

Thinking of it, probably indeed.

> > @@ -668,11 +668,24 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co
> > }
> > }
> >
> > +static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
> > + { .compatible = "nvidia,tegra20-pinmux", tegra20_pinmux_init },
> > + { },
> > +};
> > +
> > static int __devinit tegra_pinmux_probe(struct platform_device *pdev)
> > {
> > struct resource *res;
> > int i;
> > int config_bad = 0;
> > + const struct of_device_id *match;
> > +
> > +#ifdef CONFIG_OF
> > + match = of_match_device(tegra_pinmux_of_match, &pdev->dev);
>
> What if match==NULL? I suppose that "can't" happen with DT, since the
> device wouldn't have been probed unless there was a matching entry...
>

Exactly. That was my reasoning as well. We can't get here unless there is a
match.

> Does this work when booting without DT; IIRC the internal patches I saw
> fell back to hard-coding a call to tegra20_pinmux_init() when booting
> a static board file (i.e. not booting device-tree)? Perhaps that's in a

Unfortunately I don't have a tegra20 board which is supported without
devicetree.

Cheers,

Peter.


\
 
 \ /
  Last update: 2011-10-28 10:21    [W:0.077 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site