lkml.org 
[lkml]   [2011]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/1] Staging: hv: Move the mouse driver out of staging
Date


> -----Original Message-----
> From: Jiri Kosina [mailto:jkosina@suse.cz]
> Sent: Friday, October 28, 2011 2:47 PM
> To: KY Srinivasan
> Cc: Greg KH; linux-kernel@vger.kernel.org; devel@linuxdriverproject.org;
> virtualization@lists.osdl.org; ohering@suse.com; Dmitry Torokhov
> Subject: Re: [PATCH 1/1] Staging: hv: Move the mouse driver out of staging
>
> On Wed, 26 Oct 2011, K. Y. Srinivasan wrote:
>
> > The hv_mouse.c implements a hid compliant mouse driver for use on a
> > Hyper-V based system. This driver is currently in the staging area and
> > as part of the effort to move this driver out of staging, I had posted
> > the driver code for community review a few weeks ago. This current patch
> > addresses all the review comments I have gotten to date.
> >
> > As per Greg's suggestion, this patch does not get rid of the code from
> > the staging area. Once the mouse driver lands under the hid directory,
> > we will cleanup the staging directory.
> >
> > Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
>
> K.Y,,
>
> first, thanks a lot for your efforts on working on this driver. Porting it
> to HID infrastructure definitely is a huge and proper step.
>
> > ---
> > drivers/hid/Kconfig | 6 +
> > drivers/hid/Makefile | 1 +
> > drivers/hid/hv_mouse.c | 592
> ++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 599 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/hid/hv_mouse.c
> >
> > diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> > index 1130a89..068dd97 100644
> > --- a/drivers/hid/Kconfig
> > +++ b/drivers/hid/Kconfig
> > @@ -613,6 +613,12 @@ config HID_ZYDACRON
> > ---help---
> > Support for Zydacron remote control.
> >
> > +config HYPERV_MOUSE
> > + tristate "Microsoft Hyper-V mouse driver"
> > + depends on HYPERV
> > + ---help---
> > + Select this option to enable the Hyper-V mouse driver.
> > +
> > endmenu
> >
> > endif # HID_SUPPORT
> > diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> > index 0a0a38e..436ac2e 100644
> > --- a/drivers/hid/Makefile
> > +++ b/drivers/hid/Makefile
> > @@ -76,6 +76,7 @@ obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
> > obj-$(CONFIG_HID_WACOM) += hid-wacom.o
> > obj-$(CONFIG_HID_WALTOP) += hid-waltop.o
> > obj-$(CONFIG_HID_WIIMOTE) += hid-wiimote.o
> > +obj-$(CONFIG_HYPERV_MOUSE) += hv_mouse.o
>
> I'd prefer a bit to follow the current naming of the drivers in
> drivers/hid directory ... all the device-specific (vendor-specific)
> drivers currently are called hid-<vendor> or similar.
>
> We could talk about changing this naming scheme, but before we reach any
> conclusion on this, I'd prefer this to stay for all drivers if possible.

Do you want the driver module to conform to the naming scheme you have?
Greg, in the past has resisted changing driver names, but I have no objection
to conforming to the naming convention you have.

>
> > obj-$(CONFIG_USB_HID) += usbhid/
> > obj-$(CONFIG_USB_MOUSE) += usbhid/
> > diff --git a/drivers/hid/hv_mouse.c b/drivers/hid/hv_mouse.c
> > new file mode 100644
> > index 0000000..dd42411
> > --- /dev/null
> > +++ b/drivers/hid/hv_mouse.c
> > @@ -0,0 +1,592 @@
> > +/*
> > + * Copyright (c) 2009, Citrix Systems, Inc.
> > + * Copyright (c) 2010, Microsoft Corporation.
> > + * Copyright (c) 2011, Novell Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> for
> > + * more details.
> > + */
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/device.h>
> > +#include <linux/completion.h>
> > +#include <linux/input.h>
> > +#include <linux/hid.h>
> > +#include <linux/hiddev.h>
> > +#include <linux/hyperv.h>
> > +
> > +
> > +struct hv_input_dev_info {
> > + unsigned int size;
> > + unsigned short vendor;
> > + unsigned short product;
> > + unsigned short version;
> > + unsigned short reserved[11];
> > +};
> > +
> > +/* The maximum size of a synthetic input message. */
> > +#define SYNTHHID_MAX_INPUT_REPORT_SIZE 16
> > +
> > +/*
> > + * Current version
> > + *
> > + * History:
> > + * Beta, RC < 2008/1/22 1,0
> > + * RC > 2008/1/22 2,0
> > + */
> > +#define SYNTHHID_INPUT_VERSION_MAJOR 2
> > +#define SYNTHHID_INPUT_VERSION_MINOR 0
> > +#define SYNTHHID_INPUT_VERSION
> (SYNTHHID_INPUT_VERSION_MINOR | \
> > + (SYNTHHID_INPUT_VERSION_MAJOR <<
> 16))
> > +
> > +
> > +#pragma pack(push, 1)
> > +/*
> > + * Message types in the synthetic input protocol
> > + */
> > +enum synthhid_msg_type {
> > + SYNTH_HID_PROTOCOL_REQUEST,
> > + SYNTH_HID_PROTOCOL_RESPONSE,
> > + SYNTH_HID_INITIAL_DEVICE_INFO,
> > + SYNTH_HID_INITIAL_DEVICE_INFO_ACK,
> > + SYNTH_HID_INPUT_REPORT,
> > + SYNTH_HID_MAX
> > +};
> > +
> > +/*
> > + * Basic message structures.
> > + */
> > +struct synthhid_msg_hdr {
> > + enum synthhid_msg_type type;
> > + u32 size;
> > +};
> > +
> > +struct synthhid_msg {
> > + struct synthhid_msg_hdr header;
> > + char data[1]; /* Enclosed message */
> > +};
> > +
> > +union synthhid_version {
> > + struct {
> > + u16 minor_version;
> > + u16 major_version;
> > + };
> > + u32 version;
> > +};
> > +
> > +/*
> > + * Protocol messages
> > + */
> > +struct synthhid_protocol_request {
> > + struct synthhid_msg_hdr header;
> > + union synthhid_version version_requested;
> > +};
> > +
> > +struct synthhid_protocol_response {
> > + struct synthhid_msg_hdr header;
> > + union synthhid_version version_requested;
> > + unsigned char approved;
> > +};
> > +
> > +struct synthhid_device_info {
> > + struct synthhid_msg_hdr header;
> > + struct hv_input_dev_info hid_dev_info;
> > + struct hid_descriptor hid_descriptor;
> > +};
> > +
> > +struct synthhid_device_info_ack {
> > + struct synthhid_msg_hdr header;
> > + unsigned char reserved;
> > +};
> > +
> > +struct synthhid_input_report {
> > + struct synthhid_msg_hdr header;
> > + char buffer[1];
> > +};
> > +
> > +#pragma pack(pop)
> > +
> > +#define INPUTVSC_SEND_RING_BUFFER_SIZE (10*PAGE_SIZE)
> > +#define INPUTVSC_RECV_RING_BUFFER_SIZE (10*PAGE_SIZE)
>
> Where does the '10' constant come from? Is it completely arbitrary, or
> does it some real background?

There is nothing magical about this number; this number, I think is used on
the Windows guests and so we are using it here as well.

>
> > +
> > +#define NBITS(x) (((x)/BITS_PER_LONG)+1)
>
> Where is this macro needed? (I wouldn't notice normally, but I have
> wondered why you can't use BIT_WORD and found that I can't seem to find a
> place where this macro would actually be used :) ).

If it is not used, I will get rid of it.

>
> > +
> > +enum pipe_prot_msg_type {
> > + PIPE_MESSAGE_INVALID,
> > + PIPE_MESSAGE_DATA,
> > + PIPE_MESSAGE_MAXIMUM
> > +};
> > +
> > +
> > +struct pipe_prt_msg {
> > + enum pipe_prot_msg_type type;
> > + u32 size;
> > + char data[1];
> > +};
> > +
> > +struct mousevsc_prt_msg {
> > + enum pipe_prot_msg_type type;
> > + u32 size;
> > + union {
> > + struct synthhid_protocol_request request;
> > + struct synthhid_protocol_response response;
> > + struct synthhid_device_info_ack ack;
> > + };
> > +};
> > +
> > +/*
> > + * Represents an mousevsc device
> > + */
> > +struct mousevsc_dev {
> > + struct hv_device *device;
> > + bool init_complete;
> > + struct mousevsc_prt_msg protocol_req;
> > + struct mousevsc_prt_msg protocol_resp;
> > + /* Synchronize the request/response if needed */
> > + struct completion wait_event;
> > + int dev_info_status;
> > +
> > + struct hid_descriptor *hid_desc;
> > + unsigned char *report_desc;
> > + u32 report_desc_size;
> > + struct hv_input_dev_info hid_dev_info;
> > + bool connected;
> > + struct hid_device *hid_device;
> > +};
> > +
> > +
> > +static struct mousevsc_dev *alloc_input_device(struct hv_device *device)
> > +{
> > + struct mousevsc_dev *input_dev;
> > +
> > + input_dev = kzalloc(sizeof(struct mousevsc_dev), GFP_KERNEL);
> > +
> > + if (!input_dev)
> > + return NULL;
> > +
> > + input_dev->device = device;
> > + hv_set_drvdata(device, input_dev);
> > + init_completion(&input_dev->wait_event);
> > +
> > + return input_dev;
> > +}
> > +
> > +static void free_input_device(struct mousevsc_dev *device)
> > +{
> > + kfree(device->hid_desc);
> > + kfree(device->report_desc);
> > + hv_set_drvdata(device->device, NULL);
> > + kfree(device);
> > +}
> > +
> > +
> > +static void mousevsc_on_receive_device_info(struct mousevsc_dev
> *input_device,
> > + struct synthhid_device_info *device_info)
> > +{
> > + int ret = 0;
> > + struct hid_descriptor *desc;
> > + struct mousevsc_prt_msg ack;
> > +
> > + /* Assume success for now */
> > + input_device->dev_info_status = 0;
> > +
> > + memcpy(&input_device->hid_dev_info, &device_info->hid_dev_info,
> > + sizeof(struct hv_input_dev_info));
> > +
> > + desc = &device_info->hid_descriptor;
> > + WARN_ON(desc->bLength == 0);
> > +
> > + input_device->hid_desc = kzalloc(desc->bLength, GFP_ATOMIC);
> > +
> > + if (!input_device->hid_desc)
> > + goto cleanup;
> > +
> > + memcpy(input_device->hid_desc, desc, desc->bLength);
> > +
> > + input_device->report_desc_size = desc->desc[0].wDescriptorLength;
> > + if (input_device->report_desc_size == 0)
> > + goto cleanup;
> > + input_device->report_desc = kzalloc(input_device->report_desc_size,
> > + GFP_ATOMIC);
> > +
> > + if (!input_device->report_desc)
> > + goto cleanup;
> > +
> > + memcpy(input_device->report_desc,
> > + ((unsigned char *)desc) + desc->bLength,
> > + desc->desc[0].wDescriptorLength);
> > +
> > + /* Send the ack */
> > + memset(&ack, 0, sizeof(struct mousevsc_prt_msg));
> > +
> > + ack.type = PIPE_MESSAGE_DATA;
> > + ack.size = sizeof(struct synthhid_device_info_ack);
> > +
> > + ack.ack.header.type = SYNTH_HID_INITIAL_DEVICE_INFO_ACK;
> > + ack.ack.header.size = 1;
> > + ack.ack.reserved = 0;
> > +
> > + ret = vmbus_sendpacket(input_device->device->channel,
> > + &ack,
> > + sizeof(struct pipe_prt_msg) - sizeof(unsigned char) +
> > + sizeof(struct synthhid_device_info_ack),
> > + (unsigned long)&ack,
> > + VM_PKT_DATA_INBAND,
> > +
> VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
> > + if (ret != 0)
> > + goto cleanup;
> > +
> > + complete(&input_device->wait_event);
> > +
> > + return;
> > +
> > +cleanup:
> > + kfree(input_device->hid_desc);
> > + input_device->hid_desc = NULL;
> > +
> > + kfree(input_device->report_desc);
> > + input_device->report_desc = NULL;
> > +
> > + input_device->dev_info_status = -1;
> > + complete(&input_device->wait_event);
> > +}
> > +
> > +static void mousevsc_on_receive(struct hv_device *device,
> > + struct vmpacket_descriptor *packet)
> > +{
> > + struct pipe_prt_msg *pipe_msg;
> > + struct synthhid_msg *hid_msg;
> > + struct mousevsc_dev *input_dev = hv_get_drvdata(device);
> > + struct synthhid_input_report *input_report;
> > +
> > + pipe_msg = (struct pipe_prt_msg *)((unsigned long)packet +
> > + (packet->offset8 << 3));
> > +
> > + if (pipe_msg->type != PIPE_MESSAGE_DATA)
> > + return;
> > +
> > + hid_msg = (struct synthhid_msg *)&pipe_msg->data[0];
> > +
> > + switch (hid_msg->header.type) {
> > + case SYNTH_HID_PROTOCOL_RESPONSE:
> > + memcpy(&input_dev->protocol_resp, pipe_msg,
> > + pipe_msg->size + sizeof(struct pipe_prt_msg) -
> > + sizeof(unsigned char));
>
> Is there any guarantee anywhere that packet doesn't get corrupted (either
> maliciously or not)?
>
> Seems to me like we are taking it 'raw' in mousevsc_on_channel_callback()
> without any sanity checking.
>
> If not, second argument of this memcpy() could easily overflow, causing
> quite some memory corruption, right?
>
> Actually the question of sanity of the raw packet is much more general one
> throughout this driver. I am not very familiar with things in drivers/hv,
> hence the question.

The guest cannot survive a malicious host; so I think it is safe to say that the
guest can assume the host is following the protocol.

>
> > + complete(&input_dev->wait_event);
> > + break;
> > +
> > + case SYNTH_HID_INITIAL_DEVICE_INFO:
> > + WARN_ON(pipe_msg->size < sizeof(struct hv_input_dev_info));
> > +
> > + /*
> > + * Parse out the device info into device attr,
> > + * hid desc and report desc
> > + */
> > + mousevsc_on_receive_device_info(input_dev,
> > + (struct synthhid_device_info *)&pipe_msg->data[0]);
> > + break;
> > + case SYNTH_HID_INPUT_REPORT:
> > + input_report =
> > + (struct synthhid_input_report *)&pipe_msg->data[0];
> > + if (!input_dev->init_complete)
> > + break;
> > + hid_input_report(input_dev->hid_device,
> > + HID_INPUT_REPORT, input_report->buffer,
> > + input_report->header.size, 1);
> > + break;
> > + default:
> > + pr_err("unsupported hid msg type - type %d len %d",
> > + hid_msg->header.type, hid_msg->header.size);
> > + break;
> > + }
> > +
> > +}
> > +
> > +static void mousevsc_on_channel_callback(void *context)
> > +{
> > + const int packet_size = 0x100;
> > + int ret;
> > + struct hv_device *device = context;
> > + u32 bytes_recvd;
> > + u64 req_id;
> > + struct vmpacket_descriptor *desc;
> > + unsigned char *buffer;
> > + int bufferlen = packet_size;
> > +
> > + buffer = kmalloc(bufferlen, GFP_ATOMIC);
> > + if (!buffer)
> > + return;
> > +
> > + do {
> > + ret = vmbus_recvpacket_raw(device->channel, buffer,
> > + bufferlen, &bytes_recvd, &req_id);
> > +
> > + switch (ret) {
> > + case 0:
> > + if (bytes_recvd <= 0) {
> > + kfree(buffer);
> > + return;
> > + }
> > + desc = (struct vmpacket_descriptor *)buffer;
> > +
> > + switch (desc->type) {
> > + case VM_PKT_COMP:
> > + break;
> > +
> > + case VM_PKT_DATA_INBAND:
> > + mousevsc_on_receive(device, desc);
> > + break;
> > +
> > + default:
> > + pr_err("unhandled packet type %d, tid %llx len
> %d\n",
> > + desc->type,
> > + req_id,
> > + bytes_recvd);
> > + break;
> > + }
> > +
> > + break;
> > +
> > + case -ENOBUFS:
> > + kfree(buffer);
> > + /* Handle large packet */
> > + bufferlen = bytes_recvd;
> > + buffer = kmalloc(bytes_recvd, GFP_ATOMIC);
> > +
> > + if (buffer == NULL) {
>
> I'd prefer if (!buffer) here, but not a big deal.
>
> > + return;
> > + }
> > + break;
> > + }
> > + } while (1);
>
> Again, not being familiar with 'hv' infrastructure at all, this inifite
> loop makes me to ask -- in what context does it run? Why do we need it?
>
> It seems to me that it's some kind of infinite loop for event-driven
> programming, which is not something we do in kernel (outside of kernel
> threads, perhaps, with very careful handling).

This loop is invoked in a tasklet context. The agreed upon protocol between the
guest and the host is that the consumer of a ring buffer (in this case the guest) will
process all available data before returning. This permits signaling optimizations between
the producer and the consumer. For instance, if the consumer is still active as seen by the
producer (based on the read index seen by the producer), as the producer enqueues additional
data, the producer does not have to signal the consumer.

>
> > +
> > +}
> > +
> > +static int mousevsc_connect_to_vsp(struct hv_device *device)
> > +{
> > + int ret = 0;
> > + int t;
> > + struct mousevsc_dev *input_dev = hv_get_drvdata(device);
> > + struct mousevsc_prt_msg *request;
> > + struct mousevsc_prt_msg *response;
> > +
> > +
>
> No need for two spaces here.
>
> > + request = &input_dev->protocol_req;
> > +
> > + memset(request, 0, sizeof(struct mousevsc_prt_msg));
> > +
> > + request->type = PIPE_MESSAGE_DATA;
> > + request->size = sizeof(struct synthhid_protocol_request);
> > +
> > + request->request.header.type = SYNTH_HID_PROTOCOL_REQUEST;
> > + request->request.header.size = sizeof(unsigned int);
> > + request->request.version_requested.version =
> SYNTHHID_INPUT_VERSION;
> > +
> > +
>
> Here as well.
>
> > + ret = vmbus_sendpacket(device->channel, request,
> > + sizeof(struct pipe_prt_msg) -
> > + sizeof(unsigned char) +
> > + sizeof(struct synthhid_protocol_request),
> > + (unsigned long)request,
> > + VM_PKT_DATA_INBAND,
> > +
> VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
> > + if (ret != 0)
>
> Just if (ret) ... ?
>
> > + goto cleanup;
> > +
> > + t = wait_for_completion_timeout(&input_dev->wait_event, 5*HZ);
> > + if (t == 0) {
>
> if (!t)
>
> > + ret = -ETIMEDOUT;
> > + goto cleanup;
> > + }
> > +
> > + response = &input_dev->protocol_resp;
> > +
> > + if (!response->response.approved) {
> > + pr_err("synthhid protocol request failed (version %d)\n",
> > + SYNTHHID_INPUT_VERSION);
> > + ret = -ENODEV;
> > + goto cleanup;
> > + }
> > +
> > + t = wait_for_completion_timeout(&input_dev->wait_event, 5*HZ);
> > + if (t == 0) {
> > + ret = -ETIMEDOUT;
> > + goto cleanup;
> > + }
> > +
> > + /*
> > + * We should have gotten the device attr, hid desc and report
> > + * desc at this point
> > + */
> > + if (input_dev->dev_info_status)
> > + ret = -ENOMEM;
> > +
> > +cleanup:
> > +
> > + return ret;
> > +}
> > +
> > +static int mousevsc_hid_open(struct hid_device *hid)
> > +{
> > + return 0;
> > +}
> > +
> > +static int mousevsc_hid_start(struct hid_device *hid)
> > +{
> > + return 0;
> > +}
> > +
> > +static void mousevsc_hid_close(struct hid_device *hid)
> > +{
> > +}
> > +
> > +static void mousevsc_hid_stop(struct hid_device *hid)
> > +{
> > +}
> > +
> > +static struct hid_ll_driver mousevsc_ll_driver = {
> > + .open = mousevsc_hid_open,
> > + .close = mousevsc_hid_close,
> > + .start = mousevsc_hid_start,
> > + .stop = mousevsc_hid_stop,
> > +};
> > +
> > +static struct hid_driver mousevsc_hid_driver;
> > +
> > +static int mousevsc_probe(struct hv_device *device,
> > + const struct hv_vmbus_device_id *dev_id)
> > +{
> > + int ret = 0;
> > + struct mousevsc_dev *input_dev;
> > + struct hid_device *hid_dev;
> > +
> > + input_dev = alloc_input_device(device);
> > +
> > + if (!input_dev)
> > + return -ENOMEM;
> > +
> > + input_dev->init_complete = false;
> > +
> > + ret = vmbus_open(device->channel,
> > + INPUTVSC_SEND_RING_BUFFER_SIZE,
> > + INPUTVSC_RECV_RING_BUFFER_SIZE,
> > + NULL,
> > + 0,
> > + mousevsc_on_channel_callback,
> > + device
> > + );
> > +
> > + if (ret != 0) {
> > + free_input_device(input_dev);
> > + return ret;
> > + }
> > +
> > +
> > + ret = mousevsc_connect_to_vsp(device);
> > +
> > + if (ret != 0)
> > + goto probe_err0;
> > +
> > + /* workaround SA-167 */
> > + if (input_dev->report_desc[14] == 0x25)
> > + input_dev->report_desc[14] = 0x29;
> > +
> > + hid_dev = hid_allocate_device();
> > + if (IS_ERR(hid_dev)) {
> > + ret = PTR_ERR(hid_dev);
> > + goto probe_err0;
> > + }
> > +
> > + hid_dev->ll_driver = &mousevsc_ll_driver;
> > + hid_dev->driver = &mousevsc_hid_driver;
> > + hid_dev->bus = BUS_VIRTUAL;
> > + hid_dev->vendor = input_dev->hid_dev_info.vendor;
> > + hid_dev->product = input_dev->hid_dev_info.product;
> > + hid_dev->version = input_dev->hid_dev_info.version;
> > + input_dev->hid_device = hid_dev;
> > +
> > + sprintf(hid_dev->name, "%s", "Microsoft Vmbus HID-compliant Mouse");
> > +
> > + ret = hid_parse_report(hid_dev, input_dev->report_desc,
> > + input_dev->report_desc_size);
> > +
> > + if (ret) {
> > + hid_err(hid_dev, "parse failed\n");
> > + goto probe_err1;
> > + }
> > +
> > + ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT |
> HID_CONNECT_HIDDEV);
> > +
> > + if (ret) {
> > + hid_err(hid_dev, "hw start failed\n");
> > + goto probe_err1;
> > + }
> > +
> > + input_dev->connected = true;
> > + input_dev->init_complete = true;
> > +
> > + return ret;
> > +
> > +probe_err1:
> > + hid_destroy_device(hid_dev);
> > +
> > +probe_err0:
> > + vmbus_close(device->channel);
> > + free_input_device(input_dev);
> > + return ret;
> > +}
> > +
> > +
> > +static int mousevsc_remove(struct hv_device *dev)
> > +{
> > + struct mousevsc_dev *input_dev = hv_get_drvdata(dev);
> > +
> > + vmbus_close(dev->channel);
> > +
> > + if (input_dev->connected) {
> > + hidinput_disconnect(input_dev->hid_device);
> > + input_dev->connected = false;
> > + hid_destroy_device(input_dev->hid_device);
> > + }
> > +
> > + free_input_device(input_dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct hv_vmbus_device_id id_table[] = {
> > + /* Mouse guid */
> > + { VMBUS_DEVICE(0x9E, 0xB6, 0xA8, 0xCF, 0x4A, 0x5B, 0xc0, 0x4c,
> > + 0xB9, 0x8B, 0x8B, 0xA1, 0xA1, 0xF3, 0xF9, 0x5A) },
> > + { },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(vmbus, id_table);
> > +
> > +static struct hv_driver mousevsc_drv = {
> > + .name = "mousevsc",
> > + .id_table = id_table,
> > + .probe = mousevsc_probe,
> > + .remove = mousevsc_remove,
> > +};
> > +
> > +static int __init mousevsc_init(void)
> > +{
> > + return vmbus_driver_register(&mousevsc_drv);
> > +}
> > +
> > +static void __exit mousevsc_exit(void)
> > +{
> > + vmbus_driver_unregister(&mousevsc_drv);
> > +}
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_VERSION(HV_DRV_VERSION);
> > +module_init(mousevsc_init);
> > +module_exit(mousevsc_exit);
>
> Thanks again for porting this to HID bus, I am looking forward to having
> this finalized.

Thanks Jiri for taking the time to review. I will address all the issues you have
raised and re-spin the patch. If it is ok with you, I will not change the driver name
in this go around as I want to hear from Greg and Olaf before I do that. Would this
prevent you from taking this driver out of staging. I could make the name change after
the driver has exited the staging area.

Regards,

K. Y



\
 
 \ /
  Last update: 2011-10-28 21:53    [W:0.758 / U:0.760 seconds]
©2003-2014 Jasper Spaans. hosted at Digital Ocean