lkml.org 
[lkml]   [2011]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/13] mtd/docg3: add erase functions
Date
Add erase capability to the docg3 driver. The erase block is
made of 2 physical blocks, as both share all 64 pages. That
makes an erase block of at least 64 kBytes.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
drivers/mtd/devices/docg3.c | 90 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 90 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 92522e0..6e323f3 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1037,6 +1037,96 @@ out:
}

/**
+ * doc_erase_block - Erase a couple of blocks
+ * @docg3: the device
+ * @block0: the first block to erase (leftmost plane)
+ * @block1: the second block to erase (rightmost plane)
+ *
+ * Erase both blocks, and return operation status
+ *
+ * Returns 0 if erase successful, -EIO if erase issue, -ETIMEOUT if chip not
+ * ready for too long
+ */
+static int doc_erase_block(struct docg3 *docg3, int block0, int block1)
+{
+ int ret, sector;
+
+ doc_dbg("doc_erase_block(blocks=(%d,%d))\n", block0, block1);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ return -EIO;
+
+ doc_set_reliable_mode(docg3);
+ doc_flash_sequence(docg3, DOC_SEQ_ERASE);
+
+ sector = block0 << DOC_ADDR_BLOCK_SHIFT;
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
+ sector = block1 << DOC_ADDR_BLOCK_SHIFT;
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
+ doc_delay(docg3, 1);
+
+ doc_flash_command(docg3, DOC_CMD_ERASECYCLE2);
+ doc_delay(docg3, 2);
+
+ if (is_prot_seq_error(docg3)) {
+ doc_err("Erase blocks %d,%d error\n", block0, block1);
+ return -EIO;
+ }
+
+ return doc_write_erase_wait_status(docg3);
+}
+
+/**
+ * doc_erase - Erase a portion of the chip
+ * @mtd: the device
+ * @info: the erase info
+ *
+ * Erase a bunch of contiguous blocks, by pairs, as a "mtd" page of 1024 is
+ * split into 2 pages of 512 bytes on 2 contiguous blocks.
+ *
+ * Returns 0 if erase successful, -EINVAL if adressing error, -EIO if erase
+ * issue
+ */
+static int doc_erase(struct mtd_info *mtd, struct erase_info *info)
+{
+ struct docg3 *docg3 = mtd->priv;
+ uint64_t len;
+ int block0, block1, page, ret, ofs = 0;
+
+ doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len);
+ doc_set_device_id(docg3, docg3->device_id);
+
+ info->state = MTD_ERASE_PENDING;
+ calc_block_sector(info->addr + info->len,
+ &block0, &block1, &page, &ofs);
+ ret = -EINVAL;
+ if (block1 > docg3->max_block || page || ofs)
+ goto reset_err;
+
+ ret = 0;
+ calc_block_sector(info->addr, &block0, &block1, &page, &ofs);
+ doc_set_reliable_mode(docg3);
+ for (len = info->len; !ret && len > 0; len -= mtd->erasesize) {
+ info->state = MTD_ERASING;
+ ret = doc_erase_block(docg3, block0, block1);
+ block0 += 2;
+ block1 += 2;
+ }
+
+ if (ret)
+ goto reset_err;
+
+ info->state = MTD_ERASE_DONE;
+ return 0;
+
+reset_err:
+ info->state = MTD_ERASE_FAILED;
+ return ret;
+}
+
+/**
* doc_write_page - Write a single page to the chip
* @docg3: the device
* @to: the offset from first block and first page, in bytes, aligned on page
--
1.7.5.4


\
 
 \ /
  Last update: 2011-10-28 19:57    [W:0.095 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site