lkml.org 
[lkml]   [2011]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: system hang after kernel kthreadd blocked INFO
I've made a test. When I copy some file (about 50G) from a XFS to ext4,
some WARNING was here.

[21689.043248] ------------[ cut here ]------------
[21689.043289] WARNING: at fs/xfs/xfs_file.c:767
xfs_file_dio_aio_write+0x12d/0x1bf()
[21689.043340] Hardware name: PowerEdge R410
[21689.043368] Modules linked in: cnic uio bonding 8250_pnp dcdbas
i7core_edac edac_core 8250 serial_core sg evdev acpi_power_meter hwmon
bnx2 autofs4 [last unloaded: scsi_wait_scan]
[21689.043499] Pid: 1491, comm: mysqld Not tainted 3.1.0 #1
[21689.043529] Call Trace:
[21689.043559] [<ffffffff8103e61b>] ? warn_slowpath_common+0x7b/0xc0
[21689.043593] [<ffffffff81394eb6>] ? xfs_file_dio_aio_write+0x12d/0x1bf
[21689.043628] [<ffffffff811f020a>] ? rwsem_wake+0x4a/0x60
[21689.043662] [<ffffffff8117cf48>] ? xfs_file_aio_write+0x298/0x2b0
[21689.043698] [<ffffffff8106990a>] ? futex_wake+0xfa/0x120
[21689.043732] [<ffffffff810dae18>] ? do_sync_write+0xb8/0xf0
[21689.043766] [<ffffffff81399c99>] ? _raw_spin_unlock_irq+0x9/0x20
[21689.043801] [<ffffffff8102ebe4>] ? finish_task_switch+0x64/0xe0
[21689.043835] [<ffffffff810db58a>] ? vfs_write+0xaa/0x170
[21689.043866] [<ffffffff810dba03>] ? sys_pwrite64+0x83/0xa0
[21689.043898] [<ffffffff8139a612>] ? system_call_fastpath+0x16/0x1b
[21689.043931] ---[ end trace b102c917ac93e616 ]---
[21938.563619] ------------[ cut here ]------------
[21938.563659] WARNING: at fs/xfs/xfs_file.c:767
xfs_file_dio_aio_write+0x12d/0x1bf()
[21938.563711] Hardware name: PowerEdge R410
[21938.563738] Modules linked in: cnic uio bonding 8250_pnp dcdbas
i7core_edac edac_core 8250 serial_core sg evdev acpi_power_meter hwmon
bnx2 autofs4 [last unloaded: scsi_wait_scan]
[21938.563869] Pid: 1491, comm: mysqld Tainted: G W 3.1.0 #1
[21938.563902] Call Trace:
[21938.563931] [<ffffffff8103e61b>] ? warn_slowpath_common+0x7b/0xc0
[21938.563965] [<ffffffff81394eb6>] ? xfs_file_dio_aio_write+0x12d/0x1bf
[21938.564069] [<ffffffff810692d1>] ? get_futex_key+0x161/0x2c0
[21938.564103] [<ffffffff8117cf48>] ? xfs_file_aio_write+0x298/0x2b0
[21938.564139] [<ffffffff810dae18>] ? do_sync_write+0xb8/0xf0
[21938.564173] [<ffffffff81399c99>] ? _raw_spin_unlock_irq+0x9/0x20
[21938.564208] [<ffffffff8102ebe4>] ? finish_task_switch+0x64/0xe0
[21938.564242] [<ffffffff810db58a>] ? vfs_write+0xaa/0x170
[21938.564273] [<ffffffff810dba03>] ? sys_pwrite64+0x83/0xa0
[21938.564306] [<ffffffff8139a612>] ? system_call_fastpath+0x16/0x1b
[21938.564339] ---[ end trace b102c917ac93e617 ]---
[21938.584668] ------------[ cut here ]------------
[21938.584714] WARNING: at fs/xfs/xfs_file.c:767
xfs_file_dio_aio_write+0x12d/0x1bf()
[21938.584766] Hardware name: PowerEdge R410
[21938.584794] Modules linked in: cnic uio bonding 8250_pnp dcdbas
i7core_edac edac_core 8250 serial_core sg evdev acpi_power_meter hwmon
bnx2 autofs4 [last unloaded: scsi_wait_scan]
[21938.584923] Pid: 1491, comm: mysqld Tainted: G W 3.1.0 #1
[21938.584956] Call Trace:
[21938.584985] [<ffffffff8103e61b>] ? warn_slowpath_common+0x7b/0xc0
[21938.585019] [<ffffffff81394eb6>] ? xfs_file_dio_aio_write+0x12d/0x1bf
[21938.585056] [<ffffffff811f020a>] ? rwsem_wake+0x4a/0x60
[21938.585090] [<ffffffff8117cf48>] ? xfs_file_aio_write+0x298/0x2b0
[21938.585125] [<ffffffff810dae18>] ? do_sync_write+0xb8/0xf0
[21938.585159] [<ffffffff81399c99>] ? _raw_spin_unlock_irq+0x9/0x20
[21938.585194] [<ffffffff8102ebe4>] ? finish_task_switch+0x64/0xe0
[21938.585228] [<ffffffff810db58a>] ? vfs_write+0xaa/0x170
[21938.585259] [<ffffffff810dba03>] ? sys_pwrite64+0x83/0xa0
[21938.585292] [<ffffffff8139a612>] ? system_call_fastpath+0x16/0x1b
[21938.585387] ---[ end trace b102c917ac93e618 ]---

On 10/27/2011 05:19 PM, Tony wrote:
> From my server tuning memo, I think it should be related to cgroup or XFS.
> My mysql's data all in a XFS partation,OS is on a ext4 partation.
>
>
> On 10/27/2011 01:20 PM, Tony wrote:
>> Hi All,
>> My mysql servers were hung frequently every day.
>> All 5 mysql server.
>> Server OS include: fedora 11,fedora 14,fedora 15 x86_64
>> filesystem include: ext4,xfs
>> Hardware: dell R410
>> RAID card is "ioc0: LSISAS1068E B3: Capabilities={Initiator}" ,use
>> driver mptsas and I was checked raid by using lsiutil, raid is fine.
>> memory size includes 16G and 32G.
>>
>> The kernel which I have userd include 3.0.* and 3.1.*-rc*.Alway hung and
>> messages are same.
>> After system alarms "INFO:.......", all operations don't responsed
>> anymore,except ping from other PC,ssh doesn't responsed too.
>> Could someone help me? Thanks!!!
>>
>> info in /var/log/messages is:
>> Oct 27 11:26:38 db3 kernel: [125110.089507] INFO: task kthreadd:2
>> blocked for more than 120 seconds.
>> Oct 27 11:26:38 db3 kernel: [125110.089548] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> Oct 27 11:26:38 db3 kernel: [125110.089606] kthreadd D 0000000000000000
>> 0 2 0 0x00000000
>> Oct 27 11:26:38 db3 kernel: [125110.089656] ffff88080b82b000
>> 0000000000000046 0000000000000000 ffff8807fb15c000
>> Oct 27 11:26:38 db3 kernel: [125110.089717] ffff88080b863fd8
>> ffff88080b863fd8 ffff88080b863fd8 ffff88080b82b000
>> Oct 27 11:26:38 db3 kernel: [125110.089777] ffff88082fd113f8
>> 0000000000000000 ffff88080b82b000 ffff88080b82b048
>> Oct 27 11:26:38 db3 kernel: [125110.089837] Call Trace:
>> Oct 27 11:26:38 db3 kernel: [125110.089868] [<ffffffff8102eff7>] ?
>> pick_next_task_fair+0xb7/0x100
>> Oct 27 11:26:38 db3 kernel: [125110.089903] [<ffffffff8102abaf>] ?
>> __wake_up_common+0x4f/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.089937] [<ffffffff811f3d72>] ?
>> delay_tsc+0x42/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.089968] [<ffffffff811ee248>] ?
>> __prop_inc_single+0x28/0x50
>> Oct 27 11:26:38 db3 kernel: [125110.090002] [<ffffffff81090f10>] ?
>> __lock_page+0x70/0x70
>> Oct 27 11:26:38 db3 kernel: [125110.090035] [<ffffffff81397c26>] ?
>> io_schedule+0x56/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.090067] [<ffffffff81090f19>] ?
>> sleep_on_page+0x9/0x10
>> Oct 27 11:26:38 db3 kernel: [125110.090098] [<ffffffff8139810f>] ?
>> __wait_on_bit+0x4f/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.090130] [<ffffffff810910cf>] ?
>> wait_on_page_bit+0x6f/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.090164] [<ffffffff81059c00>] ?
>> autoremove_wake_function+0x30/0x30
>> Oct 27 11:26:38 db3 kernel: [125110.090199] [<ffffffff8109e975>] ?
>> shrink_page_list+0x405/0x810
>> Oct 27 11:26:38 db3 kernel: [125110.090231] [<ffffffff8109efa2>] ?
>> putback_lru_pages+0x222/0x290
>> Oct 27 11:26:38 db3 kernel: [125110.090267] [<ffffffff8109d567>] ?
>> update_isolated_counts+0x147/0x170
>> Oct 27 11:26:38 db3 kernel: [125110.090301] [<ffffffff8109f255>] ?
>> shrink_inactive_list+0x245/0x3d0
>> Oct 27 11:26:38 db3 kernel: [125110.090335] [<ffffffff811f3d72>] ?
>> delay_tsc+0x42/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.090366] [<ffffffff8109f832>] ?
>> shrink_zone+0x452/0x5f0
>> Oct 27 11:26:38 db3 kernel: [125110.090399] [<ffffffff810a6127>] ?
>> wait_iff_congested+0xa7/0x100
>> Oct 27 11:26:38 db3 kernel: [125110.090431] [<ffffffff81059bd0>] ?
>> __init_waitqueue_head+0x30/0x30
>> Oct 27 11:26:38 db3 kernel: [125110.090465] [<ffffffff810a02bd>] ?
>> do_try_to_free_pages+0x9d/0x3e0
>> Oct 27 11:26:38 db3 kernel: [125110.090499] [<ffffffff810a0708>] ?
>> try_to_free_pages+0x78/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.090532] [<ffffffff81097f00>] ?
>> __alloc_pages_nodemask+0x4d0/0x7f0
>> Oct 27 11:26:38 db3 kernel: [125110.090568] [<ffffffff8103c83b>] ?
>> copy_process+0xfb/0x1260
>> Oct 27 11:26:38 db3 kernel: [125110.090601] [<ffffffff81000ca8>] ?
>> __switch_to+0xc8/0x310
>> Oct 27 11:26:38 db3 kernel: [125110.090633] [<ffffffff8103daec>] ?
>> do_fork+0x10c/0x240
>> Oct 27 11:26:38 db3 kernel: [125110.090664] [<ffffffff81397602>] ?
>> __schedule+0x372/0x860
>> Oct 27 11:26:38 db3 kernel: [125110.090697] [<ffffffff81009661>] ?
>> kernel_thread+0x81/0x90
>> Oct 27 11:26:38 db3 kernel: [125110.090729] [<ffffffff810593b0>] ?
>> __init_kthread_worker+0x30/0x30
>> Oct 27 11:26:38 db3 kernel: [125110.090764] [<ffffffff8139baf0>] ?
>> gs_change+0x13/0x13
>> Oct 27 11:26:38 db3 kernel: [125110.090795] [<ffffffff8105976d>] ?
>> kthreadd+0xfd/0x140
>> Oct 27 11:26:38 db3 kernel: [125110.090826] [<ffffffff8139baf4>] ?
>> kernel_thread_helper+0x4/0x10
>> Oct 27 11:26:38 db3 kernel: [125110.090859] [<ffffffff81059670>] ?
>> tsk_fork_get_node+0x10/0x10
>> Oct 27 11:26:38 db3 kernel: [125110.090892] [<ffffffff8139baf0>] ?
>> gs_change+0x13/0x13
>> Oct 27 11:26:38 db3 kernel: [125110.090933] INFO: task irqbalance:819
>> blocked for more than 120 seconds.
>> Oct 27 11:26:38 db3 kernel: [125110.090966] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> Oct 27 11:26:38 db3 kernel: [125110.091017] irqbalance D
>> 0000000000000000 0 819 1 0x00000000
>> Oct 27 11:26:38 db3 kernel: [125110.091056] ffff8807f9dbe000
>> 0000000000000086 0000000000000000 ffff8807fb179000
>> Oct 27 11:26:38 db3 kernel: [125110.091116] ffff8807f2e9ffd8
>> ffff8807f2e9ffd8 ffff8807f2e9ffd8 ffff8807f9dbe000
>> Oct 27 11:26:38 db3 kernel: [125110.091176] ffff88082fd513f8
>> 0000000000000000 ffff8807f90eb000 00000000010eb048
>> Oct 27 11:26:38 db3 kernel: [125110.091236] Call Trace:
>> Oct 27 11:26:38 db3 kernel: [125110.091261] [<ffffffff81399c99>] ?
>> _raw_spin_unlock_irq+0x9/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.091295] [<ffffffff8102ebe4>] ?
>> finish_task_switch+0x64/0xe0
>> Oct 27 11:26:38 db3 kernel: [125110.091327] [<ffffffff8102abaf>] ?
>> __wake_up_common+0x4f/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.091360] [<ffffffff811f3d72>] ?
>> delay_tsc+0x42/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.091391] [<ffffffff811ee248>] ?
>> __prop_inc_single+0x28/0x50
>> Oct 27 11:26:38 db3 kernel: [125110.091423] [<ffffffff81090f10>] ?
>> __lock_page+0x70/0x70
>> Oct 27 11:26:38 db3 kernel: [125110.091455] [<ffffffff81397c26>] ?
>> io_schedule+0x56/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.091486] [<ffffffff81090f19>] ?
>> sleep_on_page+0x9/0x10
>> Oct 27 11:26:38 db3 kernel: [125110.091517] [<ffffffff8139810f>] ?
>> __wait_on_bit+0x4f/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.091549] [<ffffffff810910cf>] ?
>> wait_on_page_bit+0x6f/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.091581] [<ffffffff81059c00>] ?
>> autoremove_wake_function+0x30/0x30
>> Oct 27 11:26:38 db3 kernel: [125110.091615] [<ffffffff8109e975>] ?
>> shrink_page_list+0x405/0x810
>> Oct 27 11:26:38 db3 kernel: [125110.091648] [<ffffffff8109efa2>] ?
>> putback_lru_pages+0x222/0x290
>> Oct 27 11:26:38 db3 kernel: [125110.091681] [<ffffffff8109d567>] ?
>> update_isolated_counts+0x147/0x170
>> Oct 27 11:26:38 db3 kernel: [125110.091715] [<ffffffff81399c9d>] ?
>> _raw_spin_unlock_irq+0xd/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.091748] [<ffffffff8109f255>] ?
>> shrink_inactive_list+0x245/0x3d0
>> Oct 27 11:26:38 db3 kernel: [125110.091782] [<ffffffff811f3d72>] ?
>> delay_tsc+0x42/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.091813] [<ffffffff8109f832>] ?
>> shrink_zone+0x452/0x5f0
>> Oct 27 11:26:38 db3 kernel: [125110.091845] [<ffffffff810a6127>] ?
>> wait_iff_congested+0xa7/0x100
>> Oct 27 11:26:38 db3 kernel: [125110.091878] [<ffffffff81059bd0>] ?
>> __init_waitqueue_head+0x30/0x30
>> Oct 27 11:26:38 db3 kernel: [125110.091911] [<ffffffff810a02bd>] ?
>> do_try_to_free_pages+0x9d/0x3e0
>> Oct 27 11:26:38 db3 kernel: [125110.091945] [<ffffffff810a0708>] ?
>> try_to_free_pages+0x78/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.091978] [<ffffffff81097f00>] ?
>> __alloc_pages_nodemask+0x4d0/0x7f0
>> Oct 27 11:26:38 db3 kernel: [125110.092014] [<ffffffff810c9f21>] ?
>> new_slab+0x61/0x210
>> Oct 27 11:26:38 db3 kernel: [125110.092047] [<ffffffff81393f59>] ?
>> __slab_alloc.constprop.17+0x157/0x266
>> Oct 27 11:26:38 db3 kernel: [125110.092083] [<ffffffff81132739>] ?
>> stat_open+0x49/0xb0
>> Oct 27 11:26:38 db3 kernel: [125110.092116] [<ffffffff810f34c8>] ?
>> inode_init_always+0xe8/0x1a0
>> Oct 27 11:26:38 db3 kernel: [125110.092149] [<ffffffff810fa2e0>] ?
>> seq_release_private+0x60/0x60
>> Oct 27 11:26:38 db3 kernel: [125110.092182] [<ffffffff810cabc7>] ?
>> __kmalloc+0x117/0x170
>> Oct 27 11:26:38 db3 kernel: [125110.092214] [<ffffffff81132739>] ?
>> stat_open+0x49/0xb0
>> Oct 27 11:26:38 db3 kernel: [125110.092245] [<ffffffff8112a535>] ?
>> proc_reg_open+0xa5/0x190
>> Oct 27 11:26:38 db3 kernel: [125110.092277] [<ffffffff811326f0>] ?
>> meminfo_proc_show+0x4c0/0x4c0
>> Oct 27 11:26:38 db3 kernel: [125110.092310] [<ffffffff8112a490>] ?
>> proc_alloc_inode+0xa0/0xa0
>> Oct 27 11:26:38 db3 kernel: [125110.092344] [<ffffffff810d9698>] ?
>> __dentry_open+0x108/0x2f0
>> Oct 27 11:26:38 db3 kernel: [125110.092377] [<ffffffff810e94e4>] ?
>> do_last+0x1e4/0x820
>> Oct 27 11:26:38 db3 kernel: [125110.092409] [<ffffffff810e7e65>] ?
>> path_init+0x2e5/0x3c0
>> Oct 27 11:26:38 db3 kernel: [125110.092440] [<ffffffff810e9d68>] ?
>> path_openat+0xd8/0x3f0
>> Oct 27 11:26:38 db3 kernel: [125110.092472] [<ffffffff810ea0e5>] ?
>> do_filp_open+0x45/0xb0
>> Oct 27 11:26:38 db3 kernel: [125110.092504] [<ffffffff810f5c44>] ?
>> alloc_fd+0xe4/0x140
>> Oct 27 11:26:38 db3 kernel: [125110.092536] [<ffffffff810daa37>] ?
>> do_sys_open+0xf7/0x1e0
>> Oct 27 11:26:38 db3 kernel: [125110.092568] [<ffffffff8139a612>] ?
>> system_call_fastpath+0x16/0x1b
>> Oct 27 11:26:38 db3 kernel: [125110.092605] INFO: task mysqld:1465
>> blocked for more than 120 seconds.
>> Oct 27 11:26:38 db3 kernel: [125110.092637] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> Oct 27 11:26:38 db3 kernel: [125110.092689] mysqld D 0000000000000000 0
>> 1465 1203 0x00000000
>> Oct 27 11:26:38 db3 kernel: [125110.092728] ffff8807f2829000
>> 0000000000000086 ffff8807f8a47ac8 ffff8807fb179000
>> Oct 27 11:26:38 db3 kernel: [125110.092788] ffff8807f8a47fd8
>> ffff8807f8a47fd8 ffff8807f8a47fd8 ffff8807f2829000
>> Oct 27 11:26:38 db3 kernel: [125110.092847] ffff8807f8a47fd8
>> ffffffff812e6670 ffff880733e6db40 ffff8807f2829000
>> Oct 27 11:26:38 db3 kernel: [125110.092907] Call Trace:
>> Oct 27 11:26:38 db3 kernel: [125110.092934] [<ffffffff812e6670>] ?
>> dm_request+0x100/0x1b0
>> Oct 27 11:26:38 db3 kernel: [125110.092967] [<ffffffff811db708>] ?
>> generic_make_request+0x228/0x330
>> Oct 27 11:26:38 db3 kernel: [125110.093001] [<ffffffff812e5e1f>] ?
>> dm_merge_bvec+0xdf/0x150
>> Oct 27 11:26:38 db3 kernel: [125110.093033] [<ffffffff811db86c>] ?
>> submit_bio+0x5c/0xd0
>> Oct 27 11:26:38 db3 kernel: [125110.093064] [<ffffffff81397c26>] ?
>> io_schedule+0x56/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.093098] [<ffffffff8110d85f>] ?
>> __blockdev_direct_IO+0x90f/0xc10
>> Oct 27 11:26:38 db3 kernel: [125110.093134] [<ffffffff81185940>] ?
>> xfs_mru_cache_done+0x10/0x10
>> Oct 27 11:26:38 db3 kernel: [125110.093168] [<ffffffff8117699a>] ?
>> xfs_vm_direct_IO+0xaa/0x130
>> Oct 27 11:26:38 db3 kernel: [125110.093201] [<ffffffff81176f50>] ?
>> __xfs_get_blocks+0x3c0/0x3c0
>> Oct 27 11:26:38 db3 kernel: [125110.093234] [<ffffffff81176af0>] ?
>> xfs_finish_ioend_sync+0x20/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.093267] [<ffffffff810f2a1a>] ?
>> file_update_time+0xfa/0x180
>> Oct 27 11:26:38 db3 kernel: [125110.093300] [<ffffffff810921e5>] ?
>> generic_file_direct_write+0xe5/0x1c0
>> Oct 27 11:26:38 db3 kernel: [125110.093335] [<ffffffff81394f39>] ?
>> xfs_file_dio_aio_write+0x1b0/0x1bf
>> Oct 27 11:26:38 db3 kernel: [125110.093369] [<ffffffff8117cf48>] ?
>> xfs_file_aio_write+0x298/0x2b0
>> Oct 27 11:26:38 db3 kernel: [125110.093405] [<ffffffff8106990a>] ?
>> futex_wake+0xfa/0x120
>> Oct 27 11:26:38 db3 kernel: [125110.093437] [<ffffffff810dae18>] ?
>> do_sync_write+0xb8/0xf0
>> Oct 27 11:26:38 db3 kernel: [125110.093468] [<ffffffff81399c99>] ?
>> _raw_spin_unlock_irq+0x9/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.093502] [<ffffffff8102ebe4>] ?
>> finish_task_switch+0x64/0xe0
>> Oct 27 11:26:38 db3 kernel: [125110.093535] [<ffffffff810db58a>] ?
>> vfs_write+0xaa/0x170
>> Oct 27 11:26:38 db3 kernel: [125110.093566] [<ffffffff810dba03>] ?
>> sys_pwrite64+0x83/0xa0
>> Oct 27 11:26:38 db3 kernel: [125110.093598] [<ffffffff8139a612>] ?
>> system_call_fastpath+0x16/0x1b
>> Oct 27 11:26:38 db3 kernel: [125110.093631] INFO: task mysqld:1466
>> blocked for more than 120 seconds.
>> Oct 27 11:26:38 db3 kernel: [125110.093663] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> Oct 27 11:26:38 db3 kernel: [125110.093715] mysqld D 0000000000000000 0
>> 1466 1203 0x00000000
>> Oct 27 11:26:38 db3 kernel: [125110.093754] ffff8807f282a000
>> 0000000000000086 ffff8807f2c29ac8 ffff8803112c7000
>> Oct 27 11:26:38 db3 kernel: [125110.095057] ffff8807f2c29fd8
>> ffff8807f2c29fd8 ffff8807f2c29fd8 ffff8807f282a000
>> Oct 27 11:26:38 db3 kernel: [125110.095117] ffff8807f2c29fd8
>> ffffffff812e6670 ffff88049bdae9c0 ffff8807f282a000
>> Oct 27 11:26:38 db3 kernel: [125110.095176] Call Trace:
>> Oct 27 11:26:38 db3 kernel: [125110.095201] [<ffffffff812e6670>] ?
>> dm_request+0x100/0x1b0
>> Oct 27 11:26:38 db3 kernel: [125110.095233] [<ffffffff811db708>] ?
>> generic_make_request+0x228/0x330
>> Oct 27 11:26:38 db3 kernel: [125110.095267] [<ffffffff812e5e1f>] ?
>> dm_merge_bvec+0xdf/0x150
>> Oct 27 11:26:38 db3 kernel: [125110.095299] [<ffffffff811db86c>] ?
>> submit_bio+0x5c/0xd0
>> Oct 27 11:26:38 db3 kernel: [125110.095330] [<ffffffff81397c26>] ?
>> io_schedule+0x56/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.095361] [<ffffffff8110d85f>] ?
>> __blockdev_direct_IO+0x90f/0xc10
>> Oct 27 11:26:38 db3 kernel: [125110.095395] [<ffffffff8117699a>] ?
>> xfs_vm_direct_IO+0xaa/0x130
>> Oct 27 11:26:38 db3 kernel: [125110.095428] [<ffffffff81176f50>] ?
>> __xfs_get_blocks+0x3c0/0x3c0
>> Oct 27 11:26:38 db3 kernel: [125110.095462] [<ffffffff81176af0>] ?
>> xfs_finish_ioend_sync+0x20/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.095495] [<ffffffff810f2a1a>] ?
>> file_update_time+0xfa/0x180
>> Oct 27 11:26:38 db3 kernel: [125110.095527] [<ffffffff810921e5>] ?
>> generic_file_direct_write+0xe5/0x1c0
>> Oct 27 11:26:38 db3 kernel: [125110.095562] [<ffffffff81394f39>] ?
>> xfs_file_dio_aio_write+0x1b0/0x1bf
>> Oct 27 11:26:38 db3 kernel: [125110.095596] [<ffffffff810692d1>] ?
>> get_futex_key+0x161/0x2c0
>> Oct 27 11:26:38 db3 kernel: [125110.095629] [<ffffffff8117cf48>] ?
>> xfs_file_aio_write+0x298/0x2b0
>> Oct 27 11:26:38 db3 kernel: [125110.095662] [<ffffffff810dae18>] ?
>> do_sync_write+0xb8/0xf0
>> Oct 27 11:26:38 db3 kernel: [125110.095694] [<ffffffff81110157>] ?
>> fsnotify+0x27/0x300
>> Oct 27 11:26:38 db3 kernel: [125110.095726] [<ffffffff810db58a>] ?
>> vfs_write+0xaa/0x170
>> Oct 27 11:26:38 db3 kernel: [125110.095757] [<ffffffff810dba03>] ?
>> sys_pwrite64+0x83/0xa0
>> Oct 27 11:26:38 db3 kernel: [125110.095789] [<ffffffff8139a612>] ?
>> system_call_fastpath+0x16/0x1b
>> Oct 27 11:26:38 db3 kernel: [125110.095822] INFO: task mysqld:1467
>> blocked for more than 120 seconds.
>> Oct 27 11:26:38 db3 kernel: [125110.095854] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> Oct 27 11:26:38 db3 kernel: [125110.095906] mysqld D 0000000000000000 0
>> 1467 1203 0x00000000
>> Oct 27 11:26:38 db3 kernel: [125110.095945] ffff8807f282e000
>> 0000000000000086 ffff8807f2c2bac8 ffff8807fb179000
>> Oct 27 11:26:38 db3 kernel: [125110.096005] ffff8807f2c2bfd8
>> ffff8807f2c2bfd8 ffff8807f2c2bfd8 ffff8807f282e000
>> Oct 27 11:26:38 db3 kernel: [125110.096064] ffff8807f2c2bfd8
>> ffffffff812e6670 ffff8803286d26c0 ffff8807f282e000
>> Oct 27 11:26:38 db3 kernel: [125110.096124] Call Trace:
>> Oct 27 11:26:38 db3 kernel: [125110.096149] [<ffffffff812e6670>] ?
>> dm_request+0x100/0x1b0
>> Oct 27 11:26:38 db3 kernel: [125110.096181] [<ffffffff811db708>] ?
>> generic_make_request+0x228/0x330
>> Oct 27 11:26:38 db3 kernel: [125110.096214] [<ffffffff812e5e1f>] ?
>> dm_merge_bvec+0xdf/0x150
>> Oct 27 11:26:38 db3 kernel: [125110.096246] [<ffffffff811db86c>] ?
>> submit_bio+0x5c/0xd0
>> Oct 27 11:26:38 db3 kernel: [125110.096278] [<ffffffff81397c26>] ?
>> io_schedule+0x56/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.096310] [<ffffffff8110d85f>] ?
>> __blockdev_direct_IO+0x90f/0xc10
>> Oct 27 11:26:38 db3 kernel: [125110.096344] [<ffffffff8117699a>] ?
>> xfs_vm_direct_IO+0xaa/0x130
>> Oct 27 11:26:38 db3 kernel: [125110.096376] [<ffffffff81176f50>] ?
>> __xfs_get_blocks+0x3c0/0x3c0
>> Oct 27 11:26:38 db3 kernel: [125110.096409] [<ffffffff81176af0>] ?
>> xfs_finish_ioend_sync+0x20/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.096443] [<ffffffff810f2a1a>] ?
>> file_update_time+0xfa/0x180
>> Oct 27 11:26:38 db3 kernel: [125110.096475] [<ffffffff810921e5>] ?
>> generic_file_direct_write+0xe5/0x1c0
>> Oct 27 11:26:38 db3 kernel: [125110.096510] [<ffffffff81394f39>] ?
>> xfs_file_dio_aio_write+0x1b0/0x1bf
>> Oct 27 11:26:38 db3 kernel: [125110.096544] [<ffffffff8117cf48>] ?
>> xfs_file_aio_write+0x298/0x2b0
>> Oct 27 11:26:38 db3 kernel: [125110.096578] [<ffffffff8106990a>] ?
>> futex_wake+0xfa/0x120
>> Oct 27 11:26:38 db3 kernel: [125110.096609] [<ffffffff810dae18>] ?
>> do_sync_write+0xb8/0xf0
>> Oct 27 11:26:38 db3 kernel: [125110.096643] [<ffffffff8105e163>] ?
>> __srcu_read_lock+0x23/0x30
>> Oct 27 11:26:38 db3 kernel: [125110.096676] [<ffffffff810db58a>] ?
>> vfs_write+0xaa/0x170
>> Oct 27 11:26:38 db3 kernel: [125110.096707] [<ffffffff810dba03>] ?
>> sys_pwrite64+0x83/0xa0
>> Oct 27 11:26:38 db3 kernel: [125110.096739] [<ffffffff8139a612>] ?
>> system_call_fastpath+0x16/0x1b
>> Oct 27 11:26:38 db3 kernel: [125110.096772] INFO: task mysqld:1468
>> blocked for more than 120 seconds.
>> Oct 27 11:26:38 db3 kernel: [125110.096805] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> Oct 27 11:26:38 db3 kernel: [125110.096856] mysqld D 0000000000000000 0
>> 1468 1203 0x00000000
>> Oct 27 11:26:38 db3 kernel: [125110.096895] ffff8807f2828000
>> 0000000000000086 ffff8807f1a8dac8 ffff8807fb1ab000
>> Oct 27 11:26:38 db3 kernel: [125110.096955] ffff8807f1a8dfd8
>> ffff8807f1a8dfd8 ffff8807f1a8dfd8 ffff8807f2828000
>> Oct 27 11:26:38 db3 kernel: [125110.097015] ffff8807f1a8dfd8
>> ffffffff812e6670 ffff88031a58fc00 ffff8807f2828000
>> Oct 27 11:26:38 db3 kernel: [125110.097074] Call Trace:
>> Oct 27 11:26:38 db3 kernel: [125110.097100] [<ffffffff812e6670>] ?
>> dm_request+0x100/0x1b0
>> Oct 27 11:26:38 db3 kernel: [125110.097131] [<ffffffff811db708>] ?
>> generic_make_request+0x228/0x330
>> Oct 27 11:26:38 db3 kernel: [125110.097165] [<ffffffff812e5e1f>] ?
>> dm_merge_bvec+0xdf/0x150
>> Oct 27 11:26:38 db3 kernel: [125110.097197] [<ffffffff811db86c>] ?
>> submit_bio+0x5c/0xd0
>> Oct 27 11:26:38 db3 kernel: [125110.097228] [<ffffffff81397c26>] ?
>> io_schedule+0x56/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.097260] [<ffffffff8110d85f>] ?
>> __blockdev_direct_IO+0x90f/0xc10
>> Oct 27 11:26:38 db3 kernel: [125110.097294] [<ffffffff8117699a>] ?
>> xfs_vm_direct_IO+0xaa/0x130
>> Oct 27 11:26:38 db3 kernel: [125110.097327] [<ffffffff81176f50>] ?
>> __xfs_get_blocks+0x3c0/0x3c0
>> Oct 27 11:26:38 db3 kernel: [125110.097360] [<ffffffff81176af0>] ?
>> xfs_finish_ioend_sync+0x20/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.097393] [<ffffffff810f2a1a>] ?
>> file_update_time+0xfa/0x180
>> Oct 27 11:26:38 db3 kernel: [125110.097426] [<ffffffff810921e5>] ?
>> generic_file_direct_write+0xe5/0x1c0
>> Oct 27 11:26:38 db3 kernel: [125110.097461] [<ffffffff81394f39>] ?
>> xfs_file_dio_aio_write+0x1b0/0x1bf
>> Oct 27 11:26:38 db3 kernel: [125110.097495] [<ffffffff810692d1>] ?
>> get_futex_key+0x161/0x2c0
>> Oct 27 11:26:38 db3 kernel: [125110.097527] [<ffffffff8117cf48>] ?
>> xfs_file_aio_write+0x298/0x2b0
>> Oct 27 11:26:38 db3 kernel: [125110.097561] [<ffffffff810dae18>] ?
>> do_sync_write+0xb8/0xf0
>> Oct 27 11:26:38 db3 kernel: [125110.097593] [<ffffffff81110310>] ?
>> fsnotify+0x1e0/0x300
>> Oct 27 11:26:38 db3 kernel: [125110.097624] [<ffffffff810db58a>] ?
>> vfs_write+0xaa/0x170
>> Oct 27 11:26:38 db3 kernel: [125110.097656] [<ffffffff810dba03>] ?
>> sys_pwrite64+0x83/0xa0
>> Oct 27 11:26:38 db3 kernel: [125110.097688] [<ffffffff8139a612>] ?
>> system_call_fastpath+0x16/0x1b
>> Oct 27 11:26:38 db3 kernel: [125110.097767] INFO: task mysqld:22040
>> blocked for more than 120 seconds.
>> Oct 27 11:26:38 db3 kernel: [125110.097799] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> Oct 27 11:26:38 db3 kernel: [125110.097850] mysqld D 0000000000000000 0
>> 22040 1203 0x00000000
>> Oct 27 11:26:38 db3 kernel: [125110.097890] ffff8806f3741000
>> 0000000000000086 ffff88055dbffac8 ffff8807fb114000
>> Oct 27 11:26:38 db3 kernel: [125110.097950] ffff88055dbfffd8
>> ffff88055dbfffd8 ffff88055dbfffd8 ffff8806f3741000
>> Oct 27 11:26:38 db3 kernel: [125110.098009] ffff88055dbfffd8
>> ffffffff812e6670 ffff8806fa001300 ffff8806f3741000
>> Oct 27 11:26:38 db3 kernel: [125110.098069] Call Trace:
>> Oct 27 11:26:38 db3 kernel: [125110.098094] [<ffffffff812e6670>] ?
>> dm_request+0x100/0x1b0
>> Oct 27 11:26:38 db3 kernel: [125110.098126] [<ffffffff811db708>] ?
>> generic_make_request+0x228/0x330
>> Oct 27 11:26:38 db3 kernel: [125110.098159] [<ffffffff812e5e1f>] ?
>> dm_merge_bvec+0xdf/0x150
>> Oct 27 11:26:38 db3 kernel: [125110.098191] [<ffffffff811db86c>] ?
>> submit_bio+0x5c/0xd0
>> Oct 27 11:26:38 db3 kernel: [125110.098223] [<ffffffff81397c26>] ?
>> io_schedule+0x56/0x80
>> Oct 27 11:26:38 db3 kernel: [125110.098254] [<ffffffff8110d85f>] ?
>> __blockdev_direct_IO+0x90f/0xc10
>> Oct 27 11:26:38 db3 kernel: [125110.098289] [<ffffffff8117699a>] ?
>> xfs_vm_direct_IO+0xaa/0x130
>> Oct 27 11:26:38 db3 kernel: [125110.098321] [<ffffffff81176f50>] ?
>> __xfs_get_blocks+0x3c0/0x3c0
>> Oct 27 11:26:38 db3 kernel: [125110.098354] [<ffffffff81176af0>] ?
>> xfs_finish_ioend_sync+0x20/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.098388] [<ffffffff810f2a1a>] ?
>> file_update_time+0xfa/0x180
>> Oct 27 11:26:38 db3 kernel: [125110.098420] [<ffffffff810921e5>] ?
>> generic_file_direct_write+0xe5/0x1c0
>> Oct 27 11:26:38 db3 kernel: [125110.098455] [<ffffffff81394f39>] ?
>> xfs_file_dio_aio_write+0x1b0/0x1bf
>> Oct 27 11:26:38 db3 kernel: [125110.098489] [<ffffffff8117cf48>] ?
>> xfs_file_aio_write+0x298/0x2b0
>> Oct 27 11:26:38 db3 kernel: [125110.098523] [<ffffffff8106990a>] ?
>> futex_wake+0xfa/0x120
>> Oct 27 11:26:38 db3 kernel: [125110.098554] [<ffffffff810dae18>] ?
>> do_sync_write+0xb8/0xf0
>> Oct 27 11:26:38 db3 kernel: [125110.098587] [<ffffffff810db58a>] ?
>> vfs_write+0xaa/0x170
>> Oct 27 11:26:38 db3 kernel: [125110.098618] [<ffffffff810dba03>] ?
>> sys_pwrite64+0x83/0xa0
>> Oct 27 11:26:38 db3 kernel: [125110.098650] [<ffffffff8139a612>] ?
>> system_call_fastpath+0x16/0x1b
>> Oct 27 11:26:38 db3 kernel: [125110.098758] INFO: task kworker/u:0:25606
>> blocked for more than 120 seconds.
>> Oct 27 11:26:38 db3 kernel: [125110.098792] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> Oct 27 11:26:38 db3 kernel: [125110.098843] kworker/u:0 D
>> 0000000000000000 0 25606 2 0x00000000
>> Oct 27 11:26:38 db3 kernel: [125110.098882] ffff8807f2bb7000
>> 0000000000000046 ffff88078ef99e4c ffff88080b82b000
>> Oct 27 11:26:38 db3 kernel: [125110.098943] ffff88078ef99fd8
>> ffff88078ef99fd8 ffff88078ef99fd8 ffff8807f2bb7000
>> Oct 27 11:26:38 db3 kernel: [125110.099002] 0000000000000200
>> ffff8807f2bb7000 0000004000000040 0000000000000282
>> Oct 27 11:26:38 db3 kernel: [125110.099062] Call Trace:
>> Oct 27 11:26:38 db3 kernel: [125110.099088] [<ffffffff8102b779>] ?
>> sched_slice+0x49/0x90
>> Oct 27 11:26:38 db3 kernel: [125110.099121] [<ffffffff811e9dcd>] ?
>> cpumask_next_and+0x2d/0x40
>> Oct 27 11:26:38 db3 kernel: [125110.099154] [<ffffffff8102d035>] ?
>> select_task_rq_fair+0x825/0x950
>> Oct 27 11:26:38 db3 kernel: [125110.099189] [<ffffffff812011e0>] ?
>> swiotlb_dma_mapping_error+0x10/0x20
>> Oct 27 11:26:38 db3 kernel: [125110.099223] [<ffffffff811e9dcd>] ?
>> cpumask_next_and+0x2d/0x40
>> Oct 27 11:26:38 db3 kernel: [125110.099256] [<ffffffff81398005>] ?
>> schedule_timeout+0x195/0x1f0
>> Oct 27 11:26:38 db3 kernel: [125110.099289] [<ffffffff8102c349>] ?
>> check_preempt_wakeup+0x149/0x210
>> Oct 27 11:26:38 db3 kernel: [125110.099322] [<ffffffff81396fdd>] ?
>> wait_for_common+0xdd/0x1a0
>> Oct 27 11:26:38 db3 kernel: [125110.099355] [<ffffffff81036070>] ?
>> try_to_wake_up+0x290/0x290
>> Oct 27 11:26:38 db3 kernel: [125110.099387] [<ffffffff81059544>] ?
>> kthread_create_on_node+0x94/0x120
>> Oct 27 11:26:38 db3 kernel: [125110.099431] [<ffffffff810552b0>] ?
>> rescuer_thread+0x240/0x240
>> Oct 27 11:26:38 db3 kernel: [125110.099466] [<ffffffff810ca598>] ?
>> kmem_cache_alloc+0x98/0xb0
>> Oct 27 11:26:38 db3 kernel: [125110.099502] [<ffffffff81053073>] ?
>> create_worker+0xb3/0x1a0
>> Oct 27 11:26:38 db3 kernel: [125110.099537] [<ffffffff81053405>] ?
>> manage_workers+0x115/0x210
>> Oct 27 11:26:38 db3 kernel: [125110.099573] [<ffffffff8105555a>] ?
>> worker_thread+0x2aa/0x330
>> Oct 27 11:26:38 db3 kernel: [125110.099607] [<ffffffff810552b0>] ?
>> rescuer_thread+0x240/0x240
>> Oct 27 11:26:38 db3 kernel: [125110.099639] [<ffffffff8105942e>] ?
>> kthread+0x7e/0x90
>> Oct 27 11:26:38 db3 kernel: [125110.099670] [<ffffffff8139baf4>] ?
>> kernel_thread_helper+0x4/0x10
>> Oct 27 11:26:38 db3 kernel: [125110.099703] [<ffffffff810593b0>] ?
>> __init_kthread_worker+0x30/0x30
>> Oct 27 11:26:38 db3 kernel: [125110.099737] [<ffffffff8139baf0>] ?
>> gs_change+0x13/0x13
>>
>>
>> dmesg:
>> [ 0.000000] Initializing cgroup subsys cpuset
>> [ 0.000000] Initializing cgroup subsys cpu
>> [ 0.000000] Linux version 3.1.0 (root@db3) (gcc version 4.6.0 20110603
>> (Red Hat 4.6.0-10) (GCC) ) #1 SMP Tue Oct 25 16:51:49 CST 2011
>> [ 0.000000] Command line: ro
>> root=UUID=3b925ad3-1530-4efa-85ea-2b497a73f9fa rd_NO_LUKS rd_NO_LVM
>> rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us
>> [ 0.000000] BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf379000 (usable)
>> [ 0.000000] BIOS-e820: 00000000cf379000 - 00000000cf38f000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000cf38f000 - 00000000cf3ce000 (ACPI data)
>> [ 0.000000] BIOS-e820: 00000000cf3ce000 - 00000000d0000000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
>> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000830000000 (usable)
>> [ 0.000000] NX (Execute Disable) protection: active
>> [ 0.000000] DMI 2.6 present.
>> [ 0.000000] DMI: Dell Inc. PowerEdge R410/0WWR83, BIOS 1.6.3 02/07/2011
>> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
>> (usable) ==> (reserved)
>> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
>> (usable)
>> [ 0.000000] No AGP bridge found
>> [ 0.000000] last_pfn = 0x830000 max_arch_pfn = 0x400000000
>> [ 0.000000] MTRR default type: uncachable
>> [ 0.000000] MTRR fixed ranges enabled:
>> [ 0.000000] 00000-9FFFF write-back
>> [ 0.000000] A0000-BFFFF uncachable
>> [ 0.000000] C0000-D3FFF write-protect
>> [ 0.000000] D4000-EBFFF uncachable
>> [ 0.000000] EC000-FFFFF write-protect
>> [ 0.000000] MTRR variable ranges enabled:
>> [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
>> [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
>> [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
>> [ 0.000000] 3 base 0100000000 mask FF00000000 write-back
>> [ 0.000000] 4 base 0200000000 mask FE00000000 write-back
>> [ 0.000000] 5 base 0400000000 mask FC00000000 write-back
>> [ 0.000000] 6 base 0800000000 mask FFE0000000 write-back
>> [ 0.000000] 7 base 0820000000 mask FFF0000000 write-back
>> [ 0.000000] 8 disabled
>> [ 0.000000] 9 disabled
>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
>> 0x7010600070106
>> [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000
>> (usable) ==> (reserved)
>> [ 0.000000] last_pfn = 0xcf379 max_arch_pfn = 0x400000000
>> [ 0.000000] initial memory mapped : 0 - 20000000
>> [ 0.000000] Base memory trampoline at [ffff88000009c000] 9c000 size 8192
>> [ 0.000000] Using GB pages for direct mapping
>> [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf379000
>> [ 0.000000] 0000000000 - 00c0000000 page 1G
>> [ 0.000000] 00c0000000 - 00cf200000 page 2M
>> [ 0.000000] 00cf200000 - 00cf379000 page 4k
>> [ 0.000000] kernel direct mapping tables up to cf379000 @
>> 1fffd000-20000000
>> [ 0.000000] init_memory_mapping: 0000000100000000-0000000830000000
>> [ 0.000000] 0100000000 - 0800000000 page 1G
>> [ 0.000000] 0800000000 - 0830000000 page 2M
>> [ 0.000000] kernel direct mapping tables up to 830000000 @
>> cf377000-cf379000
>> [ 0.000000] RAMDISK: 37bf5000 - 37ff0000
>> [ 0.000000] ACPI: RSDP 00000000000f10c0 00024 (v02 DELL )
>> [ 0.000000] ACPI: XSDT 00000000000f11c4 0009C (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: FACP 00000000cf3b3f9c 000F4 (v03 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: DSDT 00000000cf38f000 03B51 (v01 DELL PE_SC3 00000001
>> INTL 20050624)
>> [ 0.000000] ACPI: FACS 00000000cf3b6000 00040
>> [ 0.000000] ACPI: APIC 00000000cf3b3478 0015E (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: SPCR 00000000cf3b35d8 00050 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: HPET 00000000cf3b362c 00038 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: DM__ 00000000cf3b3668 001C0 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: MCFG 00000000cf3b38c4 0003C (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: WD__ 00000000cf3b3904 00134 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: SLIC 00000000cf3b3a3c 00024 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: ERST 00000000cf392cd4 00270 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: HEST 00000000cf392f44 003A8 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: BERT 00000000cf392b54 00030 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: EINJ 00000000cf392b84 00150 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: SRAT 00000000cf3b3bc0 00370 (v01 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: TCPA 00000000cf3b3f34 00064 (v02 DELL PE_SC3 00000001
>> DELL 00000001)
>> [ 0.000000] ACPI: SSDT 00000000cf3b7000 0220C (v01 INTEL PPM RCM
>> 80000001 INTL 20061109)
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] [ffffea0000000000-ffffea0020bfffff] PMD ->
>> [ffff88080f600000-ffff88082f5fffff] on node 0
>> [ 0.000000] Zone PFN ranges:
>> [ 0.000000] DMA 0x00000010 -> 0x00001000
>> [ 0.000000] DMA32 0x00001000 -> 0x00100000
>> [ 0.000000] Normal 0x00100000 -> 0x00830000
>> [ 0.000000] Movable zone start PFN for each node
>> [ 0.000000] early_node_map[3] active PFN ranges
>> [ 0.000000] 0: 0x00000010 -> 0x000000a0
>> [ 0.000000] 0: 0x00000100 -> 0x000cf379
>> [ 0.000000] 0: 0x00100000 -> 0x00830000
>> [ 0.000000] On node 0 totalpages: 8385289
>> [ 0.000000] DMA zone: 64 pages used for memmap
>> [ 0.000000] DMA zone: 4 pages reserved
>> [ 0.000000] DMA zone: 3916 pages, LIFO batch:0
>> [ 0.000000] DMA32 zone: 16320 pages used for memmap
>> [ 0.000000] DMA32 zone: 828345 pages, LIFO batch:31
>> [ 0.000000] Normal zone: 117760 pages used for memmap
>> [ 0.000000] Normal zone: 7418880 pages, LIFO batch:31
>> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>> [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>> [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI
>> 0-23
>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
>> [ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI
>> 32-55
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> [ 0.000000] ACPI: IRQ0 used by override.
>> [ 0.000000] ACPI: IRQ2 used by override.
>> [ 0.000000] ACPI: IRQ9 used by override.
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>> [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
>> [ 0.000000] nr_irqs_gsi: 72
>> [ 0.000000] Allocating PCI resources starting at d0000000 (gap:
>> d0000000:10000000)
>> [ 0.000000] Booting paravirtualized kernel on bare hardware
>> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
>> nr_node_ids:1
>> [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88082fc00000 s73792 r8192
>> d24512 u262144
>> [ 0.000000] pcpu-alloc: s73792 r8192 d24512 u262144 alloc=1*2097152
>> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
>> pages: 8251141
>> [ 0.000000] Kernel command line: ro
>> root=UUID=3b925ad3-1530-4efa-85ea-2b497a73f9fa rd_NO_LUKS rd_NO_LVM
>> rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us
>> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13,
>> 33554432 bytes)
>> [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216
>> bytes)
>> [ 0.000000] Checking aperture...
>> [ 0.000000] No AGP bridge found
>> [ 0.000000] Memory: 32888888k/34340864k available (3704k kernel code,
>> 799708k absent, 652268k reserved, 2839k data, 484k init)
>> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
>> CPUs=8, Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] NR_IRQS:4352 nr_irqs:1288 16
>> [ 0.000000] Extended CMOS year: 2000
>> [ 0.000000] Console: colour VGA+ 80x25
>> [ 0.000000] console [tty0] enabled
>> [ 0.000000] allocated 268435456 bytes of page_cgroup
>> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want
>> memory cgroups
>> [ 0.000000] hpet clockevent registered
>> [ 0.000000] Fast TSC calibration using PIT
>> [ 0.010000] Detected 2128.422 MHz processor.
>> [ 0.000004] Calibrating delay loop (skipped), value calculated using
>> timer frequency.. 4256.84 BogoMIPS (lpj=21284220)
>> [ 0.000151] pid_max: default: 32768 minimum: 301
>> [ 0.000263] Mount-cache hash table entries: 256
>> [ 0.000480] Initializing cgroup subsys cpuacct
>> [ 0.000555] Initializing cgroup subsys memory
>> [ 0.000632] Initializing cgroup subsys devices
>> [ 0.000724] CPU: Physical Processor ID: 1
>> [ 0.000794] CPU: Processor Core ID: 0
>> [ 0.000867] mce: CPU supports 9 MCE banks
>> [ 0.000946] CPU0: Thermal monitoring enabled (TM1)
>> [ 0.001023] using mwait in idle threads.
>> [ 0.001921] Freeing SMP alternatives: 16k freed
>> [ 0.001999] ACPI: Core revision 20110623
>> [ 0.003682] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.103741] CPU0: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz stepping 02
>> [ 0.218361] Performance Events: PEBS fmt1+, Westmere events, Intel PMU
>> driver.
>> [ 0.218592] ... version: 3
>> [ 0.218662] ... bit width: 48
>> [ 0.218731] ... generic registers: 4
>> [ 0.218801] ... value mask: 0000ffffffffffff
>> [ 0.218873] ... max period: 000000007fffffff
>> [ 0.218945] ... fixed-purpose events: 3
>> [ 0.219015] ... event mask: 000000070000000f
>> [ 0.219302] NMI watchdog enabled, takes one hw-pmu counter.
>> [ 0.219450] Booting Node 0, Processors #1
>> [ 0.219550] smpboot cpu 1: start_ip = 9c000
>> [ 0.398430] NMI watchdog enabled, takes one hw-pmu counter.
>> [ 0.398567] #2
>> [ 0.398617] smpboot cpu 2: start_ip = 9c000
>> [ 0.578283] NMI watchdog enabled, takes one hw-pmu counter.
>> [ 0.578452] #3
>> [ 0.578501] smpboot cpu 3: start_ip = 9c000
>> [ 0.758254] NMI watchdog enabled, takes one hw-pmu counter.
>> [ 0.758383] #4
>> [ 0.758432] smpboot cpu 4: start_ip = 9c000
>> [ 0.938198] NMI watchdog enabled, takes one hw-pmu counter.
>> [ 0.938372] #5
>> [ 0.938421] smpboot cpu 5: start_ip = 9c000
>> [ 1.118073] NMI watchdog enabled, takes one hw-pmu counter.
>> [ 1.118205] #6
>> [ 1.118254] smpboot cpu 6: start_ip = 9c000
>> [ 1.298020] NMI watchdog enabled, takes one hw-pmu counter.
>> [ 1.298185] #7 Ok.
>> [ 1.298251] smpboot cpu 7: start_ip = 9c000
>> [ 1.477895] NMI watchdog enabled, takes one hw-pmu counter.
>> [ 1.477986] Brought up 8 CPUs
>> [ 1.478055] Total of 8 processors activated (34049.19 BogoMIPS).
>> [ 1.483402] NET: Registered protocol family 16
>> [ 1.483546] ACPI FADT declares the system doesn't support PCIe ASPM, so
>> disable it
>> [ 1.483641] ACPI: bus type pci registered
>> [ 1.483753] dca service started, version 1.12.1
>> [ 1.483855] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>> 0xe0000000-0xefffffff] (base 0xe0000000)
>> [ 1.483954] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>> [ 1.511468] PCI: Using configuration type 1 for base access
>> [ 1.512503] bio: create slab <bio-0> at 0
>> [ 1.513819] ACPI: Added _OSI(Module Device)
>> [ 1.513894] ACPI: Added _OSI(Processor Device)
>> [ 1.513965] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [ 1.514036] ACPI: Added _OSI(Processor Aggregator Device)
>> [ 1.514679] ACPI: EC: Look up EC in DSDT
>> [ 1.515554] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>> [ 1.516540] ACPI: Interpreter enabled
>> [ 1.516610] ACPI: (supports S0 S5)
>> [ 1.516773] ACPI: Using IOAPIC for interrupt routing
>> [ 1.519541] HEST: Table parsing has been initialized.
>> [ 1.519616] PCI: Using host bridge windows from ACPI; if necessary, use
>> "pci=nocrs" and report a bug
>> [ 1.519885] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [ 1.520090] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
>> [ 1.520167] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
>> [ 1.520243] pci_root PNP0A08:00: host bridge window [mem
>> 0x000a0000-0x000bffff]
>> [ 1.520336] pci_root PNP0A08:00: host bridge window [mem
>> 0xd0000000-0xfdffffff]
>> [ 1.520429] pci_root PNP0A08:00: host bridge window [mem
>> 0xfed40000-0xfed44fff]
>> [ 1.520539] pci 0000:00:00.0: [8086:3403] type 0 class 0x000600
>> [ 1.520589] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
>> [ 1.520593] pci 0000:00:00.0: PME# disabled
>> [ 1.520614] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
>> [ 1.520662] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>> [ 1.520665] pci 0000:00:01.0: PME# disabled
>> [ 1.520686] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
>> [ 1.520733] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>> [ 1.520737] pci 0000:00:03.0: PME# disabled
>> [ 1.520759] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
>> [ 1.520806] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>> [ 1.520810] pci 0000:00:07.0: PME# disabled
>> [ 1.520836] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
>> [ 1.520900] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
>> [ 1.520963] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
>> [ 1.521031] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880
>> [ 1.521045] pci 0000:00:16.0: reg 10: [mem 0xdf0e0000-0xdf0e3fff 64bit]
>> [ 1.521110] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880
>> [ 1.521123] pci 0000:00:16.1: reg 10: [mem 0xdf0e4000-0xdf0e7fff 64bit]
>> [ 1.521186] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880
>> [ 1.521199] pci 0000:00:16.2: reg 10: [mem 0xdf0e8000-0xdf0ebfff 64bit]
>> [ 1.521262] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880
>> [ 1.521275] pci 0000:00:16.3: reg 10: [mem 0xdf0ec000-0xdf0effff 64bit]
>> [ 1.521338] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880
>> [ 1.521351] pci 0000:00:16.4: reg 10: [mem 0xdf0f0000-0xdf0f3fff 64bit]
>> [ 1.521414] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880
>> [ 1.521426] pci 0000:00:16.5: reg 10: [mem 0xdf0f4000-0xdf0f7fff 64bit]
>> [ 1.521489] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880
>> [ 1.521502] pci 0000:00:16.6: reg 10: [mem 0xdf0f8000-0xdf0fbfff 64bit]
>> [ 1.521565] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880
>> [ 1.521578] pci 0000:00:16.7: reg 10: [mem 0xdf0fc000-0xdf0fffff 64bit]
>> [ 1.521643] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
>> [ 1.521687] pci 0000:00:1a.0: reg 20: [io 0xec40-0xec5f]
>> [ 1.521730] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
>> [ 1.521774] pci 0000:00:1a.1: reg 20: [io 0xec60-0xec7f]
>> [ 1.521827] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
>> [ 1.521849] pci 0000:00:1a.7: reg 10: [mem 0xdf0de000-0xdf0de3ff]
>> [ 1.521922] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>> [ 1.521926] pci 0000:00:1a.7: PME# disabled
>> [ 1.521948] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
>> [ 1.521993] pci 0000:00:1d.0: reg 20: [io 0xec80-0xec9f]
>> [ 1.522036] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
>> [ 1.522079] pci 0000:00:1d.1: reg 20: [io 0xeca0-0xecbf]
>> [ 1.522123] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
>> [ 1.522166] pci 0000:00:1d.2: reg 20: [io 0xecc0-0xecdf]
>> [ 1.522210] pci 0000:00:1d.3: [8086:3a39] type 0 class 0x000c03
>> [ 1.522253] pci 0000:00:1d.3: reg 20: [io 0xece0-0xecff]
>> [ 1.522305] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
>> [ 1.522327] pci 0000:00:1d.7: reg 10: [mem 0xdf0df000-0xdf0df3ff]
>> [ 1.522400] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>> [ 1.522404] pci 0000:00:1d.7: PME# disabled
>> [ 1.522423] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
>> [ 1.522481] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
>> [ 1.522563] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00
>> (mask 007f)
>> [ 1.522659] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0
>> (mask 000f)
>> [ 1.522755] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0
>> (mask 000f)
>> [ 1.522882] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
>> [ 1.522898] pci 0000:00:1f.2: reg 10: [io 0xe8e0-0xe8e7]
>> [ 1.522906] pci 0000:00:1f.2: reg 14: [io 0xe8d0-0xe8d3]
>> [ 1.522914] pci 0000:00:1f.2: reg 18: [io 0xe8e8-0xe8ef]
>> [ 1.522922] pci 0000:00:1f.2: reg 1c: [io 0xe8d4-0xe8d7]
>> [ 1.522930] pci 0000:00:1f.2: reg 20: [io 0xec00-0xec0f]
>> [ 1.522938] pci 0000:00:1f.2: reg 24: [io 0xec10-0xec1f]
>> [ 1.522981] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
>> [ 1.522997] pci 0000:00:1f.5: reg 10: [io 0xe8f0-0xe8f7]
>> [ 1.523005] pci 0000:00:1f.5: reg 14: [io 0xe8d8-0xe8db]
>> [ 1.523013] pci 0000:00:1f.5: reg 18: [io 0xe8f8-0xe8ff]
>> [ 1.523021] pci 0000:00:1f.5: reg 1c: [io 0xe8dc-0xe8df]
>> [ 1.523029] pci 0000:00:1f.5: reg 20: [io 0xec20-0xec2f]
>> [ 1.523037] pci 0000:00:1f.5: reg 24: [io 0xec30-0xec3f]
>> [ 1.523123] pci 0000:01:00.0: [14e4:163b] type 0 class 0x000200
>> [ 1.523139] pci 0000:01:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit]
>> [ 1.523206] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>> [ 1.523210] pci 0000:01:00.0: PME# disabled
>> [ 1.523238] pci 0000:01:00.1: [14e4:163b] type 0 class 0x000200
>> [ 1.523254] pci 0000:01:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit]
>> [ 1.523321] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
>> [ 1.523325] pci 0000:01:00.1: PME# disabled
>> [ 1.523347] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>> [ 1.523423] pci 0000:00:01.0: bridge window [mem 0xda000000-0xddffffff]
>> [ 1.523474] pci 0000:02:00.0: [1000:0058] type 0 class 0x000100
>> [ 1.523486] pci 0000:02:00.0: reg 10: [io 0xfc00-0xfcff]
>> [ 1.523498] pci 0000:02:00.0: reg 14: [mem 0xdf2ec000-0xdf2effff 64bit]
>> [ 1.523511] pci 0000:02:00.0: reg 1c: [mem 0xdf2f0000-0xdf2fffff 64bit]
>> [ 1.523526] pci 0000:02:00.0: reg 30: [mem 0xdf100000-0xdf1fffff pref]
>> [ 1.523548] pci 0000:02:00.0: supports D1 D2
>> [ 1.523566] pci 0000:00:03.0: PCI bridge to [bus 02-02]
>> [ 1.523640] pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
>> [ 1.523644] pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf2fffff]
>> [ 1.523684] pci 0000:00:07.0: PCI bridge to [bus 03-03]
>> [ 1.523796] pci 0000:04:03.0: [102b:0532] type 0 class 0x000300
>> [ 1.523813] pci 0000:04:03.0: reg 10: [mem 0xd9800000-0xd9ffffff pref]
>> [ 1.523823] pci 0000:04:03.0: reg 14: [mem 0xde7fc000-0xde7fffff]
>> [ 1.523833] pci 0000:04:03.0: reg 18: [mem 0xde800000-0xdeffffff]
>> [ 1.523867] pci 0000:04:03.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>> [ 1.523925] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive
>> decode)
>> [ 1.524006] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
>> [ 1.524012] pci 0000:00:1e.0: bridge window [mem 0xd9800000-0xd9ffffff
>> 64bit pref]
>> [ 1.524016] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
>> (subtractive decode)
>> [ 1.524019] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
>> (subtractive decode)
>> [ 1.524021] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
>> (subtractive decode)
>> [ 1.524023] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff]
>> (subtractive decode)
>> [ 1.524026] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff]
>> (subtractive decode)
>> [ 1.524042] pci_bus 0000:00: on NUMA node 0
>> [ 1.524046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> [ 1.524319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>> [ 1.524369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>> [ 1.524417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
>> [ 1.524470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
>> [ 1.524588] pci0000:00: Requesting ACPI _OSC control (0x15)
>> [ 1.524822] pci0000:00: ACPI _OSC control (0x15) granted
>> [ 1.527136] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
>> [ 1.527746] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
>> [ 1.528362] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
>> [ 1.528970] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
>> [ 1.529577] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
>> [ 1.530185] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
>> [ 1.530792] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
>> [ 1.531398] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
>> [ 1.532025] vgaarb: device added:
>> PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
>> [ 1.532121] vgaarb: loaded
>> [ 1.532187] vgaarb: bridge control possible 0000:04:03.0
>> [ 1.532313] SCSI subsystem initialized
>> [ 1.532400] usbcore: registered new interface driver usbfs
>> [ 1.532481] usbcore: registered new interface driver hub
>> [ 1.532577] usbcore: registered new device driver usb
>> [ 1.532674] PCI: Using ACPI for IRQ routing
>> [ 1.539202] PCI: Discovered peer bus fe
>> [ 1.539295] pci 0000:fe:00.0: [8086:2c70] type 0 class 0x000600
>> [ 1.539315] pci 0000:fe:00.1: [8086:2d81] type 0 class 0x000600
>> [ 1.539337] pci 0000:fe:02.0: [8086:2d90] type 0 class 0x000600
>> [ 1.539355] pci 0000:fe:02.1: [8086:2d91] type 0 class 0x000600
>> [ 1.539373] pci 0000:fe:02.2: [8086:2d92] type 0 class 0x000600
>> [ 1.539391] pci 0000:fe:02.3: [8086:2d93] type 0 class 0x000600
>> [ 1.539409] pci 0000:fe:02.4: [8086:2d94] type 0 class 0x000600
>> [ 1.539429] pci 0000:fe:02.5: [8086:2d95] type 0 class 0x000600
>> [ 1.539448] pci 0000:fe:03.0: [8086:2d98] type 0 class 0x000600
>> [ 1.539466] pci 0000:fe:03.1: [8086:2d99] type 0 class 0x000600
>> [ 1.539484] pci 0000:fe:03.2: [8086:2d9a] type 0 class 0x000600
>> [ 1.539503] pci 0000:fe:03.4: [8086:2d9c] type 0 class 0x000600
>> [ 1.539522] pci 0000:fe:04.0: [8086:2da0] type 0 class 0x000600
>> [ 1.539540] pci 0000:fe:04.1: [8086:2da1] type 0 class 0x000600
>> [ 1.539558] pci 0000:fe:04.2: [8086:2da2] type 0 class 0x000600
>> [ 1.539576] pci 0000:fe:04.3: [8086:2da3] type 0 class 0x000600
>> [ 1.539596] pci 0000:fe:05.0: [8086:2da8] type 0 class 0x000600
>> [ 1.539614] pci 0000:fe:05.1: [8086:2da9] type 0 class 0x000600
>> [ 1.539632] pci 0000:fe:05.2: [8086:2daa] type 0 class 0x000600
>> [ 1.539650] pci 0000:fe:05.3: [8086:2dab] type 0 class 0x000600
>> [ 1.539670] pci 0000:fe:06.0: [8086:2db0] type 0 class 0x000600
>> [ 1.539688] pci 0000:fe:06.1: [8086:2db1] type 0 class 0x000600
>> [ 1.539706] pci 0000:fe:06.2: [8086:2db2] type 0 class 0x000600
>> [ 1.539727] pci 0000:fe:06.3: [8086:2db3] type 0 class 0x000600
>> [ 1.540125] PCI: Discovered peer bus ff
>> [ 1.540210] pci 0000:ff:00.0: [8086:2c70] type 0 class 0x000600
>> [ 1.540232] pci 0000:ff:00.1: [8086:2d81] type 0 class 0x000600
>> [ 1.540256] pci 0000:ff:02.0: [8086:2d90] type 0 class 0x000600
>> [ 1.540277] pci 0000:ff:02.1: [8086:2d91] type 0 class 0x000600
>> [ 1.540298] pci 0000:ff:02.2: [8086:2d92] type 0 class 0x000600
>> [ 1.540319] pci 0000:ff:02.3: [8086:2d93] type 0 class 0x000600
>> [ 1.540341] pci 0000:ff:02.4: [8086:2d94] type 0 class 0x000600
>> [ 1.540362] pci 0000:ff:02.5: [8086:2d95] type 0 class 0x000600
>> [ 1.540384] pci 0000:ff:03.0: [8086:2d98] type 0 class 0x000600
>> [ 1.540405] pci 0000:ff:03.1: [8086:2d99] type 0 class 0x000600
>> [ 1.540426] pci 0000:ff:03.2: [8086:2d9a] type 0 class 0x000600
>> [ 1.540447] pci 0000:ff:03.4: [8086:2d9c] type 0 class 0x000600
>> [ 1.540470] pci 0000:ff:04.0: [8086:2da0] type 0 class 0x000600
>> [ 1.540491] pci 0000:ff:04.1: [8086:2da1] type 0 class 0x000600
>> [ 1.540512] pci 0000:ff:04.2: [8086:2da2] type 0 class 0x000600
>> [ 1.540535] pci 0000:ff:04.3: [8086:2da3] type 0 class 0x000600
>> [ 1.540559] pci 0000:ff:05.0: [8086:2da8] type 0 class 0x000600
>> [ 1.540580] pci 0000:ff:05.1: [8086:2da9] type 0 class 0x000600
>> [ 1.540601] pci 0000:ff:05.2: [8086:2daa] type 0 class 0x000600
>> [ 1.540622] pci 0000:ff:05.3: [8086:2dab] type 0 class 0x000600
>> [ 1.540646] pci 0000:ff:06.0: [8086:2db0] type 0 class 0x000600
>> [ 1.540667] pci 0000:ff:06.1: [8086:2db1] type 0 class 0x000600
>> [ 1.540688] pci 0000:ff:06.2: [8086:2db2] type 0 class 0x000600
>> [ 1.540710] pci 0000:ff:06.3: [8086:2db3] type 0 class 0x000600
>> [ 1.541119] PCI: pci_cache_line_size set to 64 bytes
>> [ 1.541273] reserve RAM buffer: 00000000cf379000 - 00000000cfffffff
>> [ 1.541359] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>> [ 1.541655] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>> [ 1.543760] Switching to clocksource hpet
>> [ 1.543984] pnp: PnP ACPI init
>> [ 1.544064] ACPI: bus type pnp registered
>> [ 1.544269] pnp 00:00: [bus 00-ff]
>> [ 1.544272] pnp 00:00: [io 0x0cf8-0x0cff]
>> [ 1.544274] pnp 00:00: [io 0x0000-0x0cf7 window]
>> [ 1.544276] pnp 00:00: [io 0x0d00-0xffff window]
>> [ 1.544278] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>> [ 1.544280] pnp 00:00: [mem 0xd0000000-0xfdffffff window]
>> [ 1.544282] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>> [ 1.544345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
>> (active)
>> [ 1.544376] pnp 00:01: [io 0x0080-0x009f]
>> [ 1.544378] pnp 00:01: [io 0x0000-0x001f]
>> [ 1.544379] pnp 00:01: [io 0x00c0-0x00df]
>> [ 1.544381] pnp 00:01: [dma 4]
>> [ 1.544404] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>> [ 1.544421] pnp 00:02: [io 0x00f0-0x00ff]
>> [ 1.544431] pnp 00:02: [irq 13]
>> [ 1.544453] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
>> [ 1.544471] pnp 00:03: [io 0x0061]
>> [ 1.544555] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
>> [ 1.544575] pnp 00:04: [io 0x0070-0x007f]
>> [ 1.544581] pnp 00:04: [irq 8]
>> [ 1.544603] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>> [ 1.544745] pnp 00:05: [io 0x03f8-0x03ff]
>> [ 1.544751] pnp 00:05: [irq 4]
>> [ 1.544833] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
>> [ 1.544964] pnp 00:06: [io 0x02f8-0x02ff]
>> [ 1.544970] pnp 00:06: [irq 3]
>> [ 1.545052] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>> [ 1.545747] pnp 00:07: [io 0x0800-0x087f]
>> [ 1.545749] pnp 00:07: [io 0x00e0-0x00e7]
>> [ 1.545751] pnp 00:07: [io 0x0880-0x08ff]
>> [ 1.545753] pnp 00:07: [io 0x0900-0x091f]
>> [ 1.545754] pnp 00:07: [io 0x0920-0x0923]
>> [ 1.545756] pnp 00:07: [io 0x0924]
>> [ 1.545757] pnp 00:07: [io 0x0c00-0x0c7f]
>> [ 1.545759] pnp 00:07: [io 0x0ca0-0x0ca7]
>> [ 1.545761] pnp 00:07: [io 0x0ca9-0x0cab]
>> [ 1.545762] pnp 00:07: [io 0x0cad-0x0caf]
>> [ 1.545764] pnp 00:07: [io 0x0060]
>> [ 1.545765] pnp 00:07: [io 0x0064]
>> [ 1.545831] system 00:07: [io 0x0800-0x087f] has been reserved
>> [ 1.545907] system 00:07: [io 0x0880-0x08ff] has been reserved
>> [ 1.545981] system 00:07: [io 0x0900-0x091f] has been reserved
>> [ 1.546055] system 00:07: [io 0x0920-0x0923] has been reserved
>> [ 1.546130] system 00:07: [io 0x0924] has been reserved
>> [ 1.546203] system 00:07: [io 0x0c00-0x0c7f] has been reserved
>> [ 1.546277] system 00:07: [io 0x0ca0-0x0ca7] has been reserved
>> [ 1.546352] system 00:07: [io 0x0ca9-0x0cab] has been reserved
>> [ 1.546426] system 00:07: [io 0x0cad-0x0caf] has been reserved
>> [ 1.546501] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
>> [ 1.546540] pnp 00:08: [io 0x0ca8]
>> [ 1.546542] pnp 00:08: [io 0x0cac]
>> [ 1.546544] pnp 00:08: [irq 0 disabled]
>> [ 1.546602] system 00:08: [io 0x0ca8] has been reserved
>> [ 1.546676] system 00:08: [io 0x0cac] has been reserved
>> [ 1.546750] system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01
>> (active)
>> [ 1.547299] pnp 00:09: [mem 0xe0000000-0xefffffff]
>> [ 1.547360] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
>> [ 1.547437] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 1.547477] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
>> [ 1.547503] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
>> [ 1.547516] pnp 00:0b: [mem 0xfed90000-0xfed91fff]
>> [ 1.547574] system 00:0b: [mem 0xfed90000-0xfed91fff] has been reserved
>> [ 1.547651] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 1.547787] pnp: PnP ACPI: found 12 devices
>> [ 1.547858] ACPI: ACPI bus type pnp unregistered
>> [ 1.553195] PCI: max bus depth: 1 pci_try_num: 2
>> [ 1.553228] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>> [ 1.553303] pci 0000:00:01.0: bridge window [mem 0xda000000-0xddffffff]
>> [ 1.553384] pci 0000:00:03.0: PCI bridge to [bus 02-02]
>> [ 1.553458] pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
>> [ 1.553535] pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf2fffff]
>> [ 1.553615] pci 0000:00:07.0: PCI bridge to [bus 03-03]
>> [ 1.553698] pci 0000:04:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff
>> pref]
>> [ 1.553792] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>> [ 1.553878] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
>> [ 1.553956] pci 0000:00:1e.0: bridge window [mem 0xd9800000-0xd9ffffff
>> 64bit pref]
>> [ 1.554069] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
>> [ 1.554147] pci 0000:00:01.0: setting latency timer to 64
>> [ 1.554153] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
>> [ 1.554230] pci 0000:00:03.0: setting latency timer to 64
>> [ 1.554235] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
>> [ 1.554313] pci 0000:00:07.0: setting latency timer to 64
>> [ 1.554319] pci 0000:00:1e.0: setting latency timer to 64
>> [ 1.554323] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>> [ 1.554325] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>> [ 1.554327] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>> [ 1.554329] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff]
>> [ 1.554331] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>> [ 1.554333] pci_bus 0000:01: resource 1 [mem 0xda000000-0xddffffff]
>> [ 1.554335] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
>> [ 1.554337] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf2fffff]
>> [ 1.554339] pci_bus 0000:04: resource 1 [mem 0xde000000-0xdeffffff]
>> [ 1.554341] pci_bus 0000:04: resource 2 [mem 0xd9800000-0xd9ffffff 64bit
>> pref]
>> [ 1.554343] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
>> [ 1.554345] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
>> [ 1.554347] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>> [ 1.554349] pci_bus 0000:04: resource 7 [mem 0xd0000000-0xfdffffff]
>> [ 1.554351] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
>> [ 1.554353] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff]
>> [ 1.554355] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff]
>> [ 1.554358] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
>> [ 1.554360] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff]
>> [ 1.554392] NET: Registered protocol family 2
>> [ 1.554510] IP route cache hash table entries: 524288 (order: 10,
>> 4194304 bytes)
>> [ 1.555371] TCP established hash table entries: 524288 (order: 11,
>> 8388608 bytes)
>> [ 1.557559] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>> [ 1.558481] TCP: Hash tables configured (established 524288 bind 65536)
>> [ 1.558557] TCP reno registered
>> [ 1.558647] UDP hash table entries: 16384 (order: 8, 1572864 bytes)
>> [ 1.559348] UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes)
>> [ 1.560128] NET: Registered protocol family 1
>> [ 1.573967] pci 0000:04:03.0: Boot video device
>> [ 1.574041] PCI: CLS 64 bytes, default 64
>> [ 1.574088] Trying to unpack rootfs image as initramfs...
>> [ 1.655163] Freeing initrd memory: 4076k freed
>> [ 1.656041] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>> [ 1.656117] Placing 64MB software IO TLB between ffff8800cb377000 -
>> ffff8800cf377000
>> [ 1.656211] software IO TLB at phys 0xcb377000 - 0xcf377000
>> [ 1.735511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> [ 1.893658] SGI XFS with security attributes, large block/inode numbers,
>> no debug enabled
>> [ 1.894138] msgmni has been set to 32768
>> [ 1.894310] Block layer SCSI generic (bsg) driver version 0.4 loaded
>> (major 253)
>> [ 1.894404] io scheduler noop registered
>> [ 1.894473] io scheduler deadline registered (default)
>> [ 1.894725] pcieport 0000:00:01.0: setting latency timer to 64
>> [ 1.894772] pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
>> [ 1.894824] pcieport 0000:00:03.0: setting latency timer to 64
>> [ 1.894859] pcieport 0000:00:03.0: irq 73 for MSI/MSI-X
>> [ 1.894907] pcieport 0000:00:07.0: setting latency timer to 64
>> [ 1.894941] pcieport 0000:00:07.0: irq 74 for MSI/MSI-X
>> [ 1.895070] input: Power Button as
>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>> [ 1.895167] ACPI: Power Button [PWRF]
>> [ 1.895258] ACPI: acpi_idle registered with cpuidle
>> [ 1.895435] Monitor-Mwait will be used to enter C-1 state
>> [ 1.895471] Monitor-Mwait will be used to enter C-3 state
>> [ 1.897165] ERST: Error Record Serialization Table (ERST) support is
>> initialized.
>> [ 1.897399] GHES: APEI firmware first mode is enabled by APEI bit and
>> WHEA _OSC.
>> [ 1.897493] ioatdma: Intel(R) QuickData Technology Driver 4.00
>> [ 1.897602] ioatdma 0000:00:16.0: PCI INT A -> GSI 51 (level, low) ->
>> IRQ 51
>> [ 1.897690] ioatdma 0000:00:16.0: setting latency timer to 64
>> [ 1.897725] ioatdma 0000:00:16.0: irq 75 for MSI/MSI-X
>> [ 1.897986] ioatdma 0000:00:16.1: PCI INT B -> GSI 52 (level, low) ->
>> IRQ 52
>> [ 1.898084] ioatdma 0000:00:16.1: setting latency timer to 64
>> [ 1.898121] ioatdma 0000:00:16.1: irq 76 for MSI/MSI-X
>> [ 1.898359] ioatdma 0000:00:16.2: PCI INT C -> GSI 53 (level, low) ->
>> IRQ 53
>> [ 1.898453] ioatdma 0000:00:16.2: setting latency timer to 64
>> [ 1.898488] ioatdma 0000:00:16.2: irq 77 for MSI/MSI-X
>> [ 1.898682] ioatdma 0000:00:16.3: PCI INT D -> GSI 54 (level, low) ->
>> IRQ 54
>> [ 1.898773] ioatdma 0000:00:16.3: setting latency timer to 64
>> [ 1.898807] ioatdma 0000:00:16.3: irq 78 for MSI/MSI-X
>> [ 1.898960] ioatdma 0000:00:16.4: PCI INT A -> GSI 51 (level, low) ->
>> IRQ 51
>> [ 1.899048] ioatdma 0000:00:16.4: setting latency timer to 64
>> [ 1.899081] ioatdma 0000:00:16.4: irq 79 for MSI/MSI-X
>> [ 1.899224] ioatdma 0000:00:16.5: PCI INT B -> GSI 52 (level, low) ->
>> IRQ 52
>> [ 1.899314] ioatdma 0000:00:16.5: setting latency timer to 64
>> [ 1.899349] ioatdma 0000:00:16.5: irq 80 for MSI/MSI-X
>> [ 1.899495] ioatdma 0000:00:16.6: PCI INT C -> GSI 53 (level, low) ->
>> IRQ 53
>> [ 1.899584] ioatdma 0000:00:16.6: setting latency timer to 64
>> [ 1.899615] ioatdma 0000:00:16.6: irq 81 for MSI/MSI-X
>> [ 1.899752] ioatdma 0000:00:16.7: PCI INT D -> GSI 54 (level, low) ->
>> IRQ 54
>> [ 1.899841] ioatdma 0000:00:16.7: setting latency timer to 64
>> [ 1.899874] ioatdma 0000:00:16.7: irq 82 for MSI/MSI-X
>> [ 1.900911] brd: module loaded
>> [ 1.901039] Fusion MPT base driver 3.04.19
>> [ 1.901108] Copyright (c) 1999-2008 LSI Corporation
>> [ 1.901183] Fusion MPT SAS Host driver 3.04.19
>> [ 1.901281] mptsas 0000:02:00.0: PCI INT A -> GSI 32 (level, low) ->
>> IRQ 32
>> [ 1.901432] mptbase: ioc0: Initiating bringup
>> [ 2.653394] Refined TSC clocksource calibration: 2128.000 MHz.
>> [ 2.653479] Switching to clocksource tsc
>> [ 3.453048] ioc0: LSISAS1068E B3: Capabilities={Initiator}
>> [ 3.453321] mptsas 0000:02:00.0: setting latency timer to 64
>> [ 33.404391] scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1,
>> MaxQ=266, IRQ=32
>> [ 33.439076] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 9,
>> phy 0, sas_addr 0x5000cca0182f5c05
>> [ 33.440105] scsi 0:0:0:0: Direct-Access HITACHI HUS156045VLS600 E516
>> PQ: 0 ANSI: 6
>> [ 33.443725] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1,
>> phy 1, sas_addr 0x5000cca0181b0a6d
>> [ 33.444679] scsi 0:0:1:0: Direct-Access HITACHI HUS156045VLS600 E516
>> PQ: 0 ANSI: 6
>> [ 33.448284] mptsas: ioc0: attaching raid volume, channel 1, id 0
>> [ 33.449160] scsi 0:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0
>> ANSI: 5
>> [ 33.456035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 33.456135] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) ->
>> IRQ 19
>> [ 33.456225] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>> [ 33.456229] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>> [ 33.456255] sd 0:1:0:0: [sda] 877920256 512-byte logical blocks: (449
>> GB/418 GiB)
>> [ 33.456397] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
>> number 1
>> [ 33.456517] ehci_hcd 0000:00:1a.7: debug port 1
>> [ 33.456919] sd 0:1:0:0: [sda] Write Protect is off
>> [ 33.457007] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
>> [ 33.457211] sd 0:1:0:0: [sda] Got wrong page
>> [ 33.457289] sd 0:1:0:0: [sda] Assuming drive cache: write through
>> [ 33.458522] sd 0:1:0:0: [sda] Got wrong page
>> [ 33.458599] sd 0:1:0:0: [sda] Assuming drive cache: write through
>> [ 33.460460] ehci_hcd 0000:00:1a.7: cache line size of 64 is not
>> supported
>> [ 33.460474] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0de000
>> [ 33.466969] sda: sda1 sda2 sda3
>> [ 33.468240] sd 0:1:0:0: [sda] Got wrong page
>> [ 33.468320] sd 0:1:0:0: [sda] Assuming drive cache: write through
>> [ 33.468399] sd 0:1:0:0: [sda] Attached SCSI disk
>> [ 33.480374] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>> [ 33.480474] usb usb1: New USB device found, idVendor=1d6b,
>> idProduct=0002
>> [ 33.480550] usb usb1: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 33.480643] usb usb1: Product: EHCI Host Controller
>> [ 33.480714] usb usb1: Manufacturer: Linux 3.1.0 ehci_hcd
>> [ 33.480787] usb usb1: SerialNumber: 0000:00:1a.7
>> [ 33.480914] hub 1-0:1.0: USB hub found
>> [ 33.480988] hub 1-0:1.0: 4 ports detected
>> [ 33.481102] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) ->
>> IRQ 21
>> [ 33.481190] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>> [ 33.481193] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>> [ 33.481269] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
>> number 2
>> [ 33.482536] ehci_hcd 0000:00:1d.7: debug port 1
>> [ 33.486480] ehci_hcd 0000:00:1d.7: cache line size of 64 is not
>> supported
>> [ 33.486493] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0df000
>> [ 33.510362] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>> [ 33.510456] usb usb2: New USB device found, idVendor=1d6b,
>> idProduct=0002
>> [ 33.510532] usb usb2: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 33.510624] usb usb2: Product: EHCI Host Controller
>> [ 33.510696] usb usb2: Manufacturer: Linux 3.1.0 ehci_hcd
>> [ 33.510768] usb usb2: SerialNumber: 0000:00:1d.7
>> [ 33.510886] hub 2-0:1.0: USB hub found
>> [ 33.510957] hub 2-0:1.0: 4 ports detected
>> [ 33.511071] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ 33.511161] uhci_hcd: USB Universal Host Controller Interface driver
>> [ 33.511260] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) ->
>> IRQ 17
>> [ 33.511342] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 33.511345] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>> [ 33.511420] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
>> number 3
>> [ 33.511543] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
>> [ 33.511643] usb usb3: New USB device found, idVendor=1d6b,
>> idProduct=0001
>> [ 33.511719] usb usb3: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 33.511811] usb usb3: Product: UHCI Host Controller
>> [ 33.511883] usb usb3: Manufacturer: Linux 3.1.0 uhci_hcd
>> [ 33.511955] usb usb3: SerialNumber: 0000:00:1a.0
>> [ 33.512075] hub 3-0:1.0: USB hub found
>> [ 33.512146] hub 3-0:1.0: 2 ports detected
>> [ 33.512250] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) ->
>> IRQ 18
>> [ 33.512330] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>> [ 33.512333] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>> [ 33.512410] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
>> number 4
>> [ 33.512536] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
>> [ 33.512636] usb usb4: New USB device found, idVendor=1d6b,
>> idProduct=0001
>> [ 33.512712] usb usb4: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 33.512805] usb usb4: Product: UHCI Host Controller
>> [ 33.512876] usb usb4: Manufacturer: Linux 3.1.0 uhci_hcd
>> [ 33.512949] usb usb4: SerialNumber: 0000:00:1a.1
>> [ 33.513063] hub 4-0:1.0: USB hub found
>> [ 33.513134] hub 4-0:1.0: 2 ports detected
>> [ 33.513234] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) ->
>> IRQ 21
>> [ 33.513314] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>> [ 33.513317] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> [ 33.513391] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
>> number 5
>> [ 33.513508] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
>> [ 33.513607] usb usb5: New USB device found, idVendor=1d6b,
>> idProduct=0001
>> [ 33.513683] usb usb5: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 33.513776] usb usb5: Product: UHCI Host Controller
>> [ 33.513847] usb usb5: Manufacturer: Linux 3.1.0 uhci_hcd
>> [ 33.513919] usb usb5: SerialNumber: 0000:00:1d.0
>> [ 33.514035] hub 5-0:1.0: USB hub found
>> [ 33.514105] hub 5-0:1.0: 2 ports detected
>> [ 33.514209] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) ->
>> IRQ 20
>> [ 33.514289] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>> [ 33.514292] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> [ 33.514368] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
>> number 6
>> [ 33.514490] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
>> [ 33.514591] usb usb6: New USB device found, idVendor=1d6b,
>> idProduct=0001
>> [ 33.514667] usb usb6: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 33.514760] usb usb6: Product: UHCI Host Controller
>> [ 33.514831] usb usb6: Manufacturer: Linux 3.1.0 uhci_hcd
>> [ 33.514904] usb usb6: SerialNumber: 0000:00:1d.1
>> [ 33.515019] hub 6-0:1.0: USB hub found
>> [ 33.515089] hub 6-0:1.0: 2 ports detected
>> [ 33.515190] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) ->
>> IRQ 21
>> [ 33.515270] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>> [ 33.515273] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> [ 33.515349] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
>> number 7
>> [ 33.515462] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ecc0
>> [ 33.515560] usb usb7: New USB device found, idVendor=1d6b,
>> idProduct=0001
>> [ 33.515636] usb usb7: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 33.515729] usb usb7: Product: UHCI Host Controller
>> [ 33.515800] usb usb7: Manufacturer: Linux 3.1.0 uhci_hcd
>> [ 33.515872] usb usb7: SerialNumber: 0000:00:1d.2
>> [ 33.515987] hub 7-0:1.0: USB hub found
>> [ 33.516058] hub 7-0:1.0: 2 ports detected
>> [ 33.516155] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) ->
>> IRQ 20
>> [ 33.516235] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>> [ 33.516238] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>> [ 33.516312] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
>> number 8
>> [ 33.516429] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ece0
>> [ 33.516528] usb usb8: New USB device found, idVendor=1d6b,
>> idProduct=0001
>> [ 33.516604] usb usb8: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 33.516697] usb usb8: Product: UHCI Host Controller
>> [ 33.516768] usb usb8: Manufacturer: Linux 3.1.0 uhci_hcd
>> [ 33.516840] usb usb8: SerialNumber: 0000:00:1d.3
>> [ 33.516955] hub 8-0:1.0: USB hub found
>> [ 33.517026] hub 8-0:1.0: 2 ports detected
>> [ 33.517180] i8042: PNP: No PS/2 controller found. Probing ports
>> directly.
>> [ 33.519997] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 33.520073] serio: i8042 AUX port at 0x60,0x64 irq 12
>> [ 33.520167] mousedev: PS/2 mouse device common for all mice
>> [ 33.520266] rtc_cmos 00:04: RTC can wake from S4
>> [ 33.520411] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>> [ 33.520512] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
>> [ 33.520693] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06)
>> initialised: dm-devel@redhat.com
>> [ 33.520966] cpuidle: using governor ladder
>> [ 33.521127] usbcore: registered new interface driver usbhid
>> [ 33.521200] usbhid: USB HID core driver
>> [ 33.521307] TCP cubic registered
>> [ 33.521375] TCP htcp registered
>> [ 33.521443] NET: Registered protocol family 17
>> [ 33.601291] Freeing unused kernel memory: 484k freed
>> [ 33.601478] Write protecting the kernel read-only data: 6144k
>> [ 33.602838] Freeing unused kernel memory: 372k freed
>> [ 33.606151] Freeing unused kernel memory: 964k freed
>> [ 33.647464] dracut: dracut-009-12.fc15
>> [ 33.659026] udev[137]: starting version 167
>> [ 33.728842] dracut: Starting plymouth daemon
>> [ 33.800330] usb 1-3: new high speed USB device number 2 using ehci_hcd
>> [ 33.960579] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
>> [ 33.960665] usb 1-3: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=0
>> [ 33.961096] hub 1-3:1.0: USB hub found
>> [ 33.961327] hub 1-3:1.0: 4 ports detected
>> [ 34.002218] EXT4-fs (sda1): INFO: recovery required on readonly
>> filesystem
>> [ 34.002303] EXT4-fs (sda1): write access will be enabled during recovery
>> [ 35.052726] EXT4-fs (sda1): orphan cleanup on readonly fs
>> [ 35.052807] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced
>> inode 422458
>> [ 35.052833] EXT4-fs (sda1): 1 orphan inode deleted
>> [ 35.052904] EXT4-fs (sda1): recovery complete
>> [ 35.063544] EXT4-fs (sda1): mounted filesystem with ordered data mode.
>> Opts: (null)
>> [ 35.201718] dracut: Checking filesystems
>> [ 35.201808] dracut: fsck -T -t noopts=_netdev -A -a
>> [ 35.217779] dracut: /dev/sda1: clean, 268110/663552 files,
>> 1449695/2622603 blocks
>> [ 35.217991] dracut: Remounting
>> /dev/disk/by-uuid/3b925ad3-1530-4efa-85ea-2b497a73f9fa with -o ro,
>> [ 35.233537] EXT4-fs (sda1): mounted filesystem with ordered data mode.
>> Opts: (null)
>> [ 35.245782] dracut: Mounted root filesystem /dev/sda1
>> [ 35.677728] dracut: Switching root
>> [ 36.291322] systemd[1]: systemd 26 running in system mode. (+PAM
>> +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
>> [ 36.318184] systemd[1]: /sbin/modprobe failed with error code 1.
>> [ 36.326870] systemd[1]: Set hostname to <db3>.
>> [ 36.410718] systemd[1]: Failed to connect to audit log: Protocol not
>> supported
>> [ 37.199411] systemd-readahead-replay[492]: Bumped block_nr parameter of
>> /dev/sda to 16384. This is a temporary hack and should be removed one
>> day.
>> [ 37.289247] systemd[1]: Failed to open /dev/autofs: No such file or
>> directory
>> [ 37.289252] systemd[1]: Failed to initialize automounter: No such file
>> or directory
>> [ 37.289260] systemd[1]: Unit dev-hugepages.automount entered failed
>> state.
>> [ 37.289274] systemd[1]: Failed to open /dev/autofs: No such file or
>> directory
>> [ 37.289277] systemd[1]: Failed to initialize automounter: No such file
>> or directory
>> [ 37.289284] systemd[1]: Unit sys-kernel-debug.automount entered failed
>> state.
>> [ 37.289314] systemd[1]: Failed to open /dev/autofs: No such file or
>> directory
>> [ 37.289317] systemd[1]: Failed to initialize automounter: No such file
>> or directory
>> [ 37.289324] systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered
>> failed state.
>> [ 37.289395] systemd[1]: Failed to open /dev/autofs: No such file or
>> directory
>> [ 37.289399] systemd[1]: Failed to initialize automounter: No such file
>> or directory
>> [ 37.289406] systemd[1]: Unit sys-kernel-security.automount entered
>> failed state.
>> [ 37.289427] systemd[1]: Failed to open /dev/autofs: No such file or
>> directory
>> [ 37.289430] systemd[1]: Failed to initialize automounter: No such file
>> or directory
>> [ 37.289436] systemd[1]: Unit dev-mqueue.automount entered failed state.
>> [ 37.839956] EXT4-fs (sda1): re-mounted. Opts: (null)
>> [ 39.308315] udev[521]: starting version 167
>> [ 39.609550] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
>> v2.1.11 (July 20, 2011)
>> [ 39.609688] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) ->
>> IRQ 36
>> [ 39.609771] bnx2 0000:01:00.0: setting latency timer to 64
>> [ 39.614312] ACPI Error: No handler for Region [IPMI] (ffff88080b839240)
>> [IPMI] (20110623/evregion-373)
>> [ 39.614503] ACPI Error: Region IPMI (ID=7) has no handler
>> (20110623/exfldio-292)
>> [ 39.614688] ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL]
>> (Node ffff88080b838b18), AE_NOT_EXIST (20110623/psparse-536)
>> [ 39.614980] ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC]
>> (Node ffff88080b838a78), AE_NOT_EXIST (20110623/psparse-536)
>> [ 39.615272] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC
>> (20110623/power_meter-773)
>> [ 39.621807] scsi 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 39.621908] scsi 0:0:1:0: Attached scsi generic sg1 type 0
>> [ 39.622007] sd 0:1:0:0: Attached scsi generic sg2 type 0
>> [ 39.622357] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>> [ 39.623598] EDAC MC: Ver: 2.1.0
>> [ 39.624358] EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core
>> #1': DEV 0000:fe:03.0
>> [ 39.624496] EDAC PCI0: Giving out device to module 'i7core_edac'
>> controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
>> [ 39.624869] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core
>> #0': DEV 0000:ff:03.0
>> [ 39.625036] EDAC PCI1: Giving out device to module 'i7core_edac'
>> controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
>> [ 39.625138] EDAC i7core: Driver loaded.
>> [ 39.643127] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> [ 39.663786] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> [ 39.665137] dcdbas dcdbas: Dell Systems Management Base Driver (version
>> 5.6.0-3.2)
>> [ 39.683700] bnx2 0000:01:00.0: eth0: Broadcom NetXtreme II BCM5716
>> 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr
>> 78:2b:cb:38:bc:78
>> [ 39.683847] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) ->
>> IRQ 48
>> [ 39.683929] bnx2 0000:01:00.1: setting latency timer to 64
>> [ 39.685736] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> [ 39.689737] bnx2 0000:01:00.1: eth1: Broadcom NetXtreme II BCM5716
>> 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr
>> 78:2b:cb:38:bc:79
>> [ 39.706415] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> [ 39.827906] udev[524]: renamed network interface eth1 to em2
>> [ 39.877857] udev[525]: renamed network interface eth0 to em1
>> [ 40.585757] Adding 4200992k swap on /dev/sda2. Priority:0 extents:1
>> across:4200992k
>> [ 41.087958] systemd-fsck[734]: /dev/mapper/DATA-db: recovering journal
>> [ 42.162838] systemd-fsck[734]: /dev/mapper/DATA-db: clean,
>> 14213/13410304 files, 34832070/53635072 blocks
>> [ 42.459770] EXT4-fs (dm-0): mounted filesystem with ordered data mode.
>> Opts: (null)
>> [ 52.777061] systemd-fsck[751]: /sbin/fsck.xfs: XFS file system.
>> [ 53.161524] XFS (dm-2): Mounting Filesystem
>> [ 53.232847] XFS (dm-2): Starting recovery (logdev: internal)
>> [ 53.305479] XFS (dm-2): Ending recovery (logdev: internal)
>> [ 55.293575] dmeventd (809): /proc/809/oom_adj is deprecated, please use
>> /proc/809/oom_score_adj instead.
>> [ 55.294001] dmeventd[809]: dmeventd ready for processing.
>> [ 55.379419] lvm[809]: Monitoring snapshot DATA-dbdata_backup_4
>> [ 55.483318] acpid[820]: starting up with proc fs
>> [ 55.483547] acpid[820]: skipping incomplete file
>> /etc/acpi/events/videoconf
>> [ 55.483642] acpid[820]: 1 rule loaded
>> [ 55.483720] acpid[820]: waiting for events: event logging is off
>> [ 55.603221] smartd[819]: smartd 5.41 2011-06-09 r3365
>> [x86_64-linux-3.1.0] (local build)
>> [ 55.603326] smartd[819]: Copyright (C) 2002-11 by Bruce Allen,
>> http://smartmontools.sourceforge.net
>> [ 55.603427] smartd[819]: Opened configuration file /etc/smartd.conf
>> [ 55.603507] smartd[819]: Configuration file /etc/smartd.conf was
>> parsed, found DEVICESCAN, scanning devices
>> [ 55.604545] smartd[819]: Device: /dev/sda, opened
>> [ 55.605203] smartd[819]: Device: /dev/sda, IE (SMART) not enabled, skip
>> device
>> [ 55.605315] smartd[819]: Try 'smartctl -s on /dev/sda' to turn on SMART
>> features
>> [ 55.605427] smartd[819]: Monitoring 0 ATA and 0 SCSI devices
>> [ 55.716392] /usr/sbin/crond[821]: (CRON) INFO (running with inotify
>> support)
>> [ 55.845737] ERST: NVRAM ERST Log Address Range is not implemented yet
>> [ 55.846056] mcelog.setup[822]: read: Function not implemented
>> [ 56.571810] mcelog[829]: mcelog: Unsupported new Family 6 Model 2c CPU:
>> only decoding architectural errors
>> [ 57.013870] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27,
>> 2011)
>> [ 57.013967] bonding: In ALB mode you might experience client
>> disconnections upon reconnection of a link if the bonding module updelay
>> parameter (0 msec) is incompatible with the forwarding delay time of the
>> switch
>> [ 57.014102] bonding: MII link monitoring set to 100 ms
>> [ 57.058247] bonding: bond0: Adding slave em1.
>> [ 57.059911] bnx2 0000:01:00.0: irq 83 for MSI/MSI-X
>> [ 57.059920] bnx2 0000:01:00.0: irq 84 for MSI/MSI-X
>> [ 57.059927] bnx2 0000:01:00.0: irq 85 for MSI/MSI-X
>> [ 57.059935] bnx2 0000:01:00.0: irq 86 for MSI/MSI-X
>> [ 57.059944] bnx2 0000:01:00.0: irq 87 for MSI/MSI-X
>> [ 57.059951] bnx2 0000:01:00.0: irq 88 for MSI/MSI-X
>> [ 57.059958] bnx2 0000:01:00.0: irq 89 for MSI/MSI-X
>> [ 57.059966] bnx2 0000:01:00.0: irq 90 for MSI/MSI-X
>> [ 57.059973] bnx2 0000:01:00.0: irq 91 for MSI/MSI-X
>> [ 57.152341] bnx2 0000:01:00.0: em1: using MSIX
>> [ 57.155161] bonding: bond0: enslaving em1 as an active interface with a
>> down link.
>> [ 57.194490] bonding: bond0: Adding slave em2.
>> [ 57.195991] bnx2 0000:01:00.1: irq 92 for MSI/MSI-X
>> [ 57.196000] bnx2 0000:01:00.1: irq 93 for MSI/MSI-X
>> [ 57.196008] bnx2 0000:01:00.1: irq 94 for MSI/MSI-X
>> [ 57.196015] bnx2 0000:01:00.1: irq 95 for MSI/MSI-X
>> [ 57.196024] bnx2 0000:01:00.1: irq 96 for MSI/MSI-X
>> [ 57.196032] bnx2 0000:01:00.1: irq 97 for MSI/MSI-X
>> [ 57.196038] bnx2 0000:01:00.1: irq 98 for MSI/MSI-X
>> [ 57.196045] bnx2 0000:01:00.1: irq 99 for MSI/MSI-X
>> [ 57.196052] bnx2 0000:01:00.1: irq 100 for MSI/MSI-X
>> [ 57.282031] bnx2 0000:01:00.1: em2: using MSIX
>> [ 57.284808] bonding: bond0: enslaving em2 as an active interface with a
>> down link.
>> [ 59.858529] bnx2 0000:01:00.0: em1: NIC Copper Link is Up, 1000 Mbps
>> full duplex
>> [ 59.959300] bonding: bond0: link status definitely up for interface
>> em1, 1000 Mbps full duplex.
>> [ 59.959412] bonding: bond0: making interface em1 the new active one.
>> [ 59.962146] bonding: bond0: first active interface up!
>> [ 60.041871] bnx2 0000:01:00.1: em2: NIC Copper Link is Up, 1000 Mbps
>> full duplex
>> [ 60.069254] bonding: bond0: link status definitely up for interface
>> em2, 1000 Mbps full duplex.
>> [ 60.223389] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July
>> 20, 2011)
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>



\
 
 \ /
  Last update: 2011-10-27 11:51    [from the cache]
©2003-2011 Jasper Spaans