lkml.org 
[lkml]   [2011]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] KSZ8851-SNL: Add support for EEPROM MAC address
Date
From: Ben Dooks <ben@simtec.co.uk>

Add support for reading the MAC address from the system registers if there
is an EEPROM present. This involves caching the KS_CCR register for later
use (will also be useful for ETHTOOL support) and adding a print to say
that there is an EEPROM present.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/net/ethernet/micrel/ks8851.c | 41 ++++++++++++++++++++++++++++-----
1 files changed, 34 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index f56743a..d1669bc 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -367,21 +367,47 @@ static int ks8851_write_mac_addr(struct net_device *dev)
}

/**
+ * ks8851_read_mac_addr - read mac address from device registers
+ * @dev: The network device
+ *
+ * Update our copy of the KS8851 MAC address from the registers of @dev.
+*/
+static void ks8851_read_mac_addr(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ int i;
+
+ mutex_lock(&ks->lock);
+
+ for (i = 0; i < ETH_ALEN; i++)
+ dev->dev_addr[i] = ks8851_rdreg8(ks, KS_MAR(i));
+
+ mutex_unlock(&ks->lock);
+}
+
+/**
* ks8851_init_mac - initialise the mac address
* @ks: The device structure
*
* Get or create the initial mac address for the device and then set that
- * into the station address register. Currently we assume that the device
- * does not have a valid mac address in it, and so we use random_ether_addr()
+ * into the station address register. If there is an EEPROM present, then
+ * we try that. If no valid mac address is found we use random_ether_addr()
* to create a new one.
- *
- * In future, the driver should check to see if the device has an EEPROM
- * attached and whether that has a valid ethernet address in it.
*/
static void ks8851_init_mac(struct ks8851_net *ks)
{
struct net_device *dev = ks->netdev;

+ /* first, try reading what we've got already */
+ if (ks->rc_ccr & CCR_EEPROM) {
+ ks8851_read_mac_addr(dev);
+ if (is_valid_ether_addr(dev->dev_addr))
+ return;
+
+ netdev_err(ks->netdev, "invalid mac address read %pM\n",
+ dev->dev_addr);
+ }
+
random_ether_addr(dev->dev_addr);
ks8851_write_mac_addr(dev);
}
@@ -1674,9 +1700,10 @@ static int __devinit ks8851_probe(struct spi_device *spi)
goto err_netdev;
}

- netdev_info(ndev, "revision %d, MAC %pM, IRQ %d\n",
+ netdev_info(ndev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n",
CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
- ndev->dev_addr, ndev->irq);
+ ndev->dev_addr, ndev->irq,
+ ks->rc_ccr & CCR_EEPROM ? "has" : "no");

return 0;

--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.


\
 
 \ /
  Last update: 2011-10-27 04:21    [W:0.060 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site