lkml.org 
[lkml]   [2011]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] fbdev/cirrusfb: Rewrite Zorro graphics card probing
Date
As indicated by commit a7f4d00a82feb5b311f765bf9522bc55bee0684f ("zorro:
Defer device_register() until all devices have been identified"), cirrusfb
crashes if zorro_find_device() cannot find an expected device.

Rewrite the Zorro device probe code to make it more robust, easier to
understand, and more extensible.

Other logical changes:
- For cards that show up as 2 Zorro devices, autoprobe graphics memory
sizes based on the size of the Zorro device containing the graphics
memory.
Acording to the NetBSD sources, this is safe.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
--
Untested, due to lack of hardware
---
drivers/video/cirrusfb.c | 241 ++++++++++++++++++++++-----------------------
1 files changed, 118 insertions(+), 123 deletions(-)
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 6df7c54..357139a 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -280,52 +280,63 @@ MODULE_DEVICE_TABLE(pci, cirrusfb_pci_table);
#endif /* CONFIG_PCI */

#ifdef CONFIG_ZORRO
-static const struct zorro_device_id cirrusfb_zorro_table[] = {
+struct zorrocl {
+ enum cirrus_board type; /* Board type */
+ u32 regoffset; /* Offset of registers in first Zorro device */
+ u32 ramsize; /* Size of video RAM in first Zorro device */
+ /* If zero, use autoprobe on RAM device */
+ u32 ramoffset; /* Offset of video RAM in first Zorro device */
+ zorro_id ramid; /* Zorro ID of RAM device */
+};
+
+static const struct zorrocl zcl_sd64 __devinitconst = {
+ .type = BT_SD64,
+ .ramid = ZORRO_PROD_HELFRICH_SD64_RAM,
+};
+
+static const struct zorrocl zcl_piccolo __devinitconst = {
+ .type = BT_PICCOLO,
+ .ramid = ZORRO_PROD_HELFRICH_PICCOLO_RAM,
+};
+
+static const struct zorrocl zcl_picasso __devinitconst = {
+ .type = BT_PICASSO,
+ .ramid = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM,
+};
+
+static const struct zorrocl zcl_spectrum __devinitconst = {
+ .type = BT_SPECTRUM,
+ .ramid = ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_RAM,
+};
+
+static const struct zorrocl zcl_picasso4_z3 __devinitconst = {
+ .type = BT_PICASSO4,
+ .regoffset = 0x00600000,
+ .ramsize = 4 * MB_,
+ .ramoffset = 0x01000000,
+};
+
+
+static const struct zorro_device_id cirrusfb_zorro_table[] __devinitconst = {
{
- .id = ZORRO_PROD_HELFRICH_SD64_RAM,
- .driver_data = BT_SD64,
+ .id = ZORRO_PROD_HELFRICH_SD64_REG,
+ .driver_data = (unsigned long)&zcl_sd64,
}, {
- .id = ZORRO_PROD_HELFRICH_PICCOLO_RAM,
- .driver_data = BT_PICCOLO,
+ .id = ZORRO_PROD_HELFRICH_PICCOLO_REG,
+ .driver_data = (unsigned long)&zcl_piccolo,
}, {
- .id = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM,
- .driver_data = BT_PICASSO,
+ .id = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG,
+ .driver_data = (unsigned long)&zcl_picasso,
}, {
- .id = ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_RAM,
- .driver_data = BT_SPECTRUM,
+ .id = ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_REG,
+ .driver_data = (unsigned long)&zcl_spectrum,
}, {
.id = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z3,
- .driver_data = BT_PICASSO4,
+ .driver_data = (unsigned long)&zcl_picasso4_z3,
},
{ 0 }
};
MODULE_DEVICE_TABLE(zorro, cirrusfb_zorro_table);
-
-static const struct {
- zorro_id id2;
- unsigned long size;
-} cirrusfb_zorro_table2[] = {
- [BT_SD64] = {
- .id2 = ZORRO_PROD_HELFRICH_SD64_REG,
- .size = 0x400000
- },
- [BT_PICCOLO] = {
- .id2 = ZORRO_PROD_HELFRICH_PICCOLO_REG,
- .size = 0x200000
- },
- [BT_PICASSO] = {
- .id2 = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG,
- .size = 0x200000
- },
- [BT_SPECTRUM] = {
- .id2 = ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_REG,
- .size = 0x200000
- },
- [BT_PICASSO4] = {
- .id2 = 0,
- .size = 0x400000
- }
-};
#endif /* CONFIG_ZORRO */

#ifdef CIRRUSFB_DEBUG
@@ -1956,16 +1967,12 @@ static void cirrusfb_zorro_unmap(struct fb_info *info)
struct cirrusfb_info *cinfo = info->par;
struct zorro_dev *zdev = to_zorro_dev(info->device);

- zorro_release_device(zdev);
-
- if (cinfo->btype == BT_PICASSO4) {
- cinfo->regbase -= 0x600000;
- iounmap((void *)cinfo->regbase);
+ if (info->fix.smem_start > 16 * MB_)
iounmap(info->screen_base);
- } else {
- if (zorro_resource_start(zdev) > 0x01000000)
- iounmap(info->screen_base);
- }
+ if (info->fix.mmio_start > 16 * MB_)
+ iounmap(cinfo->regbase);
+
+ zorro_release_device(zdev);
}
#endif /* CONFIG_ZORRO */

@@ -2222,115 +2229,102 @@ static struct pci_driver cirrusfb_pci_driver = {
static int __devinit cirrusfb_zorro_register(struct zorro_dev *z,
const struct zorro_device_id *ent)
{
- struct cirrusfb_info *cinfo;
struct fb_info *info;
+ int error;
+ const struct zorrocl *zcl;
enum cirrus_board btype;
- struct zorro_dev *z2 = NULL;
- unsigned long board_addr, board_size, size;
- int ret;
-
- btype = ent->driver_data;
- if (cirrusfb_zorro_table2[btype].id2)
- z2 = zorro_find_device(cirrusfb_zorro_table2[btype].id2, NULL);
- size = cirrusfb_zorro_table2[btype].size;
+ unsigned long regbase, ramsize, rambase;
+ struct cirrusfb_info *cinfo;

info = framebuffer_alloc(sizeof(struct cirrusfb_info), &z->dev);
if (!info) {
printk(KERN_ERR "cirrusfb: could not allocate memory\n");
- ret = -ENOMEM;
- goto err_out;
+ return -ENOMEM;
}

- dev_info(info->device, "%s board detected\n",
- cirrusfb_board_info[btype].name);
-
- cinfo = info->par;
- cinfo->btype = btype;
-
- assert(z);
- assert(btype != BT_NONE);
+ zcl = (const struct zorrocl *)ent->driver_data;
+ btype = zcl->type;
+ regbase = zorro_resource_start(z) + zcl->regoffset;
+ ramsize = zcl->ramsize;
+ if (ramsize) {
+ rambase = zorro_resource_start(z) + zcl->ramoffset;
+ } else {
+ struct zorro_dev *ram = zorro_find_device(zcl->ramid, NULL);
+ if (!ram || !zorro_resource_len(ram)) {
+ dev_err(info->device, "No video RAM found\n");
+ error = -ENODEV;
+ goto err_release_fb;
+ }
+ rambase = zorro_resource_start(ram);
+ ramsize = zorro_resource_len(ram);
+ }

- board_addr = zorro_resource_start(z);
- board_size = zorro_resource_len(z);
- info->screen_size = size;
+ dev_info(info->device,
+ "%s board detected, REG at 0x%lx, %lu MiB RAM at 0x%lx\n",
+ cirrusfb_board_info[btype].name, regbase, ramsize / MB_,
+ rambase);

if (!zorro_request_device(z, "cirrusfb")) {
- dev_err(info->device, "cannot reserve region 0x%lx, abort\n",
- board_addr);
- ret = -EBUSY;
+ dev_err(info->device, "Cannot reserve %pR\n", &z->resource);
+ error = -EBUSY;
goto err_release_fb;
}

- ret = -EIO;
-
- if (btype == BT_PICASSO4) {
- dev_info(info->device, " REG at $%lx\n", board_addr + 0x600000);
-
- /* To be precise, for the P4 this is not the */
- /* begin of the board, but the begin of RAM. */
- /* for P4, map in its address space in 2 chunks (### TEST! ) */
- /* (note the ugly hardcoded 16M number) */
- cinfo->regbase = ioremap(board_addr, 16777216);
- if (!cinfo->regbase)
- goto err_release_region;
-
- dev_dbg(info->device, "Virtual address for board set to: $%p\n",
- cinfo->regbase);
- cinfo->regbase += 0x600000;
- info->fix.mmio_start = board_addr + 0x600000;
-
- info->fix.smem_start = board_addr + 16777216;
- info->screen_base = ioremap(info->fix.smem_start, 16777216);
- if (!info->screen_base)
- goto err_unmap_regbase;
- } else {
- dev_info(info->device, " REG at $%lx\n",
- (unsigned long) z2->resource.start);
-
- info->fix.smem_start = board_addr;
- if (board_addr > 0x01000000)
- info->screen_base = ioremap(board_addr, board_size);
- else
- info->screen_base = (caddr_t) ZTWO_VADDR(board_addr);
- if (!info->screen_base)
- goto err_release_region;
+ cinfo = info->par;
+ cinfo->btype = btype;

- /* set address for REG area of board */
- cinfo->regbase = (caddr_t) ZTWO_VADDR(z2->resource.start);
- info->fix.mmio_start = z2->resource.start;
+ info->fix.mmio_start = regbase;
+ cinfo->regbase = regbase > 16 * MB_ ? ioremap(regbase, 64 * 1024)
+ : (caddr_t)ZTWO_VADDR(regbase);
+ if (!cinfo->regbase) {
+ dev_err(info->device, "Cannot map registers\n");
+ error = -EIO;
+ goto err_release_dev;
+ }

- dev_dbg(info->device, "Virtual address for board set to: $%p\n",
- cinfo->regbase);
+ info->fix.smem_start = rambase;
+ info->screen_size = ramsize;
+ info->screen_base = rambase > 16 * MB_ ? ioremap(rambase, ramsize)
+ : (caddr_t)ZTWO_VADDR(rambase);
+ if (!info->screen_base) {
+ dev_err(info->device, "Cannot map video RAM\n");
+ error = -EIO;
+ goto err_unmap_reg;
}
+
cinfo->unmap = cirrusfb_zorro_unmap;

dev_info(info->device,
- "Cirrus Logic chipset on Zorro bus, RAM (%lu MB) at $%lx\n",
- board_size / MB_, board_addr);
-
- zorro_set_drvdata(z, info);
+ "Cirrus Logic chipset on Zorro bus, RAM (%lu MiB) at 0x%lx\n",
+ ramsize / MB_, rambase);

/* MCLK select etc. */
if (cirrusfb_board_info[btype].init_sr1f)
vga_wseq(cinfo->regbase, CL_SEQR1F,
cirrusfb_board_info[btype].sr1f);

- ret = cirrusfb_register(info);
- if (!ret)
- return 0;
+ error = cirrusfb_register(info);
+ if (error) {
+ dev_err(info->device, "Failed to register device, error %d\n",
+ error);
+ goto err_unmap_ram;
+ }

- if (btype == BT_PICASSO4 || board_addr > 0x01000000)
+ zorro_set_drvdata(z, info);
+ return 0;
+
+err_unmap_ram:
+ if (rambase > 16 * MB_)
iounmap(info->screen_base);

-err_unmap_regbase:
- if (btype == BT_PICASSO4)
- iounmap(cinfo->regbase - 0x600000);
-err_release_region:
- release_region(board_addr, board_size);
+err_unmap_reg:
+ if (regbase > 16 * MB_)
+ iounmap(cinfo->regbase);
+err_release_dev:
+ zorro_release_device(z);
err_release_fb:
framebuffer_release(info);
-err_out:
- return ret;
+ return error;
}

void __devexit cirrusfb_zorro_unregister(struct zorro_dev *z)
@@ -2338,6 +2332,7 @@ void __devexit cirrusfb_zorro_unregister(struct zorro_dev *z)
struct fb_info *info = zorro_get_drvdata(z);

cirrusfb_cleanup(info);
+ zorro_set_drvdata(z, NULL);
}

static struct zorro_driver cirrusfb_zorro_driver = {
--
1.7.0.4


\
 
 \ /
  Last update: 2011-10-20 13:45    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site