lkml.org 
[lkml]   [2011]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/30] ARM/omap: omap specific randconfig fixes
Date
Hi Tony,

I've mentioned these patches before, and now I've managed to
go through them again and clean them enough for submission.

If nobody has any objections, I would like to send them to
Linus in the coming merge window, otherwise it would be nice
if you could pick the ones that look good to you and send
me a pull request. If any of these look like they should be
backported to stable kernels, please tell me and I'll add
a cc:stable@k.o tag.

The entire set is also available from
git pull git://git.linaro.org/people/arnd/arm-soc.git randconfig/omap

but I have not yet pulled them into the for-next branch.

Arnd

Arnd Bergmann (30):
sound/omap: omap_mcpdm_remove cannot be __devexit
video/omap: fix dependencies
video/omap: fix build dependencies
ARM: omap: add missing __devexit_p() annotations
ARM: omap: enable building omap2 without omap2420/2430
ARM: omap: fix build with CONFIG_I2C_OMAP disabled
ARM: omap: fix visibility of omap2_mbox_iva_priv
ARM: omap2+: fix building without i2c
ARM: omap2: export functions used by nand driver
ARM: omap/iommu: always provide iommu debug code
ARM: omap2/n8x0: work around modular omap mmc
ARM: omap4: always build omap_phy_internal
ARM: omap2+: fix omap_hdq_init compilation
ARM: omap2: irq.c is always needed
usb/musb: use a Kconfig choice to pick the right DMA method
usb/musb: HDRC depends on TWL4030_CORE for OMAP3/4
usb/musb: allow building USB_MUSB_TUSB6010 as a module
omap-usb: automatically select MFD_OMAP_USB_HOST
tty/serial/omap: console can only be built-in
media/omap_vout: disable driver for now
sound/soc/omap: limit to omap2plus
mfd: build twl6030 only on omap2
ARM: omap2: select twl4030 support on boards that need it
ARM: omap2+: ensure that one of omap2/3/4 is selected
ARM: OMAP depends on MMU
ARM: omap: add board autoselection
ARM: omap: select L2X0 cache on omap4
ARM: omap: select CPU_FREQ_TABLE where needed
ARM: omap: select USB_ARCH_HAS_EHCI only when USB is enabled
ARM: omap2: select ARM_AMBA for OMAP3_EMU

arch/arm/Kconfig | 1 +
arch/arm/mach-omap2/Kconfig | 61 +++++++++++++++++++++++++-
arch/arm/mach-omap2/Makefile | 12 ++---
arch/arm/mach-omap2/board-n8x0.c | 7 ++-
arch/arm/mach-omap2/devices.c | 10 +++--
arch/arm/mach-omap2/gpmc.c | 2 +
arch/arm/mach-omap2/mailbox.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +-
arch/arm/mach-omap2/smartreflex.c | 2 +-
arch/arm/plat-omap/Kconfig | 5 ++
arch/arm/plat-omap/dma.c | 2 +-
arch/arm/plat-omap/include/plat/i2c.h | 6 +-
arch/arm/plat-omap/include/plat/multi.h | 5 ++
arch/arm/plat-omap/iommu.c | 2 +-
drivers/media/video/omap/Kconfig | 1 +
drivers/mfd/Kconfig | 6 +-
drivers/tty/serial/Kconfig | 2 +-
drivers/usb/musb/Kconfig | 58 +++++++++++++++----------
drivers/usb/musb/Makefile | 26 ++----------
drivers/usb/musb/musb_core.c | 3 +-
drivers/usb/musb/musb_io.h | 2 +-
drivers/usb/musb/tusb6010.c | 1 +
drivers/video/omap/Kconfig | 41 ++++++++++++++++--
drivers/video/omap/Makefile | 64 +++++++++++++---------------
drivers/video/omap2/displays/Kconfig | 7 ++-
sound/soc/omap/Kconfig | 2 +-
sound/soc/omap/mcpdm.c | 2 +-
sound/soc/omap/mcpdm.h | 2 +-
31 files changed, 221 insertions(+), 121 deletions(-)

--
1.7.5.4



\
 
 \ /
  Last update: 2011-10-02 16:51    [W:0.500 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site