lkml.org 
[lkml]   [2011]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 3/5] input/cma3000_d0x: Keep configuration on poweroff
    Date
    When the device goes to poweroff keep the spi/i2c configuration.
    Otherwhise the device could not wake up if it was in spi mode.

    Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
    ---
    drivers/input/misc/cma3000_d0x.c | 6 +++++-
    1 files changed, 5 insertions(+), 1 deletions(-)

    diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
    index 9899742..15577b7 100644
    --- a/drivers/input/misc/cma3000_d0x.c
    +++ b/drivers/input/misc/cma3000_d0x.c
    @@ -44,6 +44,7 @@
    #define CMA3000_RANGE2G (1 << 7)
    #define CMA3000_RANGE8G (0 << 7)
    #define CMA3000_BUSI2C (0 << 4)
    +#define CMA3000_BUSSPI (1 << 4)
    #define CMA3000_MODEMASK (7 << 1)
    #define CMA3000_GRANGEMASK (1 << 7)

    @@ -230,8 +231,11 @@ static int cma3000_poweron(struct cma3000_accl_data *data)
    static int cma3000_poweroff(struct cma3000_accl_data *data)
    {
    int ret;
    + u8 ctrl = CMAMODE_POFF;

    - ret = CMA3000_SET(data, CMA3000_CTRL, CMAMODE_POFF, "Mode setting");
    + ctrl |= data->bus_ops->ctrl_mod;
    +
    + ret = CMA3000_SET(data, CMA3000_CTRL , ctrl, "Mode setting");
    msleep(CMA3000_SETDELAY);

    return ret;
    --
    1.7.7


    \
     
     \ /
      Last update: 2011-10-18 10:31    [W:0.028 / U:1.624 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site