lkml.org 
[lkml]   [2011]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/3] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board
On Tue, 11 Oct 2011, Josh Wu wrote:

> This patch add:
> - ov2640 sensor in sam9m10/sam9g45 board.
> - support to use PCK as ISI_MCK. PCK's parent is managed in SoC level, e.g. at91sam9g45_devices.c
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
> ---
> arch/arm/mach-at91/at91sam9g45_devices.c | 98 +++++++++++++++++++++++++++++-
> arch/arm/mach-at91/board-sam9m10g45ek.c | 85 +++++++++++++++++++++++++-
> 2 files changed, 180 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
> index 600bffb..00e6a7f 100644
> --- a/arch/arm/mach-at91/at91sam9g45_devices.c
> +++ b/arch/arm/mach-at91/at91sam9g45_devices.c
> @@ -16,7 +16,7 @@
> #include <linux/platform_device.h>
> #include <linux/i2c-gpio.h>
> #include <linux/atmel-mci.h>
> -
> +#include <linux/clk.h>
> #include <linux/fb.h>
> #include <video/atmel_lcdc.h>
>
> @@ -28,7 +28,10 @@
> #include <mach/at_hdmac.h>
> #include <mach/atmel-mci.h>
>
> +#include <media/atmel-isi.h>
> +
> #include "generic.h"
> +#include "clock.h"
>
>
> /* --------------------------------------------------------------------
> @@ -863,6 +866,99 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
> void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
> #endif
>
> +/* --------------------------------------------------------------------
> + * Image Sensor Interface
> + * -------------------------------------------------------------------- */
> +#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
> +static u64 isi_dmamask = DMA_BIT_MASK(32);
> +static struct isi_platform_data isi_data;
> +
> +struct resource isi_resources[] = {
> + [0] = {
> + .start = AT91SAM9G45_BASE_ISI,
> + .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = AT91SAM9G45_ID_ISI,
> + .end = AT91SAM9G45_ID_ISI,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct platform_device at91sam9g45_isi_device = {
> + .name = "atmel_isi",
> + .id = 0,
> + .dev = {
> + .dma_mask = &isi_dmamask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + .platform_data = &isi_data,
> + },
> + .resource = isi_resources,
> + .num_resources = ARRAY_SIZE(isi_resources),
> +};
> +
> +static struct clk_lookup isi_mck_lookups[] = {
> + CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
> +};
> +
> +void __init at91_add_device_isi(struct isi_platform_data * data,
> + bool use_pck_as_mck)

Extra space.

> +{
> + struct clk *pck;
> + struct clk *parent;
> +
> + if (!data)
> + return;
> + isi_data = *data;
> +
> + at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */
> + at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */
> + at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */
> + at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */
> + at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */
> + at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */
> + at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */
> + at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */
> + at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */
> + at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */
> + at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */
> + at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */
> + at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */
> + at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */
> + at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */
> +
> + platform_device_register(&at91sam9g45_isi_device);
> +
> + if (use_pck_as_mck) {
> + at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */
> +
> + pck = clk_get(NULL, "pck1");
> + parent = clk_get(NULL, "plla");
> +
> + if (IS_ERR(pck) || IS_ERR(parent))
> + BUG();

Use BUG_ON().

> +
> + if (clk_set_parent(pck, parent))
> + printk(KERN_ERR "Failed to set PCK's parent\n");

pr_err()

> + else {

Missing braces before "else."

> + /* Register PCK as ISI_MCK */
> + isi_mck_lookups->clk = pck;

If you're certain, it'll always be a single-element array, you might
remove the array completely. If you want to have the array, better do

+ isi_mck_lookups[0].clk = pck;

Or even:

+ #define CLK_IDX_ISI_MCK 0

...

+ [CLK_IDX_ISI_MCK] = CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),

...

+ isi_mck_lookups[CLK_IDX_ISI_MCK].clk = pck;

But in any case I wouldn't use "isi_mck_lookups->clk" with an array.

> + clkdev_add_table(isi_mck_lookups,
> + ARRAY_SIZE(isi_mck_lookups));
> + }
> +
> + clk_put(pck);
> + clk_put(parent);
> + }
> +
> + return;

No need for "return."

> +}
> +#else
> +void __init at91_add_device_isi(struct isi_platform_data * data,
> + int use_pck_as_mck) {}

Please use the same prototype - bool. Looks like you haven't tried to
compile this with CONFIG_VIDEO_ATMEL_ISI(_MODULE) unset. Extra space.

> +#endif
> +
>
> /* --------------------------------------------------------------------
> * LCD Controller
> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
> index ad234cc..068464c 100644
> --- a/arch/arm/mach-at91/board-sam9m10g45ek.c
> +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
> @@ -23,11 +23,13 @@
> #include <linux/gpio_keys.h>
> #include <linux/input.h>
> #include <linux/leds.h>
> -#include <linux/clk.h>
> #include <linux/atmel-mci.h>
> +#include <linux/delay.h>
>
> #include <mach/hardware.h>
> #include <video/atmel_lcdc.h>
> +#include <media/soc_camera.h>
> +#include <media/atmel-isi.h>
>
> #include <asm/setup.h>
> #include <asm/mach-types.h>
> @@ -187,6 +189,76 @@ static void __init ek_add_device_nand(void)
>
>
> /*
> + * ISI
> + */
> +static struct isi_platform_data __initdata isi_data = {
> + .frate = ISI_CFG1_FRATE_CAPTURE_ALL,
> + .has_emb_sync = 0,
> + .emb_crc_sync = 0,
> + .hsync_act_low = 0,
> + .vsync_act_low = 0,
> + .pclk_act_falling = 0,

I would drop all "= 0"

> + /* to use codec and preview path simultaneously */
> + .full_mode = 1,
> + .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
> + /* ISI_MCK is provided by programmable clock or external clock */

Superfluous space before '*/'

> + .mck_hz = 25000000,
> +};
> +
> +
> +/*
> + * soc-camera OV2640
> + */
> +#if defined(CONFIG_SOC_CAMERA_OV2640) || \
> + defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
> +static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
> +{
> + /* ISI board for ek using default 8-bits connection */
> + return SOCAM_DATAWIDTH_8;
> +}
> +
> +static int i2c_camera_power(struct device *dev, int on)
> +{
> + /* enable or disable the camera */
> + pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
> + at91_set_gpio_output(AT91_PIN_PD13, !on);
> +
> + if (!on)
> + goto out;
> +
> + /* If enabled, give a reset impulse */
> + at91_set_gpio_output(AT91_PIN_PD12, 0);
> + msleep(20);
> + at91_set_gpio_output(AT91_PIN_PD12, 1);
> + msleep(100);
> +
> +out:
> + return 0;
> +}
> +
> +static struct i2c_board_info i2c_camera = {
> + I2C_BOARD_INFO("ov2640", 0x30),
> +};
> +
> +static struct soc_camera_link iclink_ov2640 = {
> + .bus_id = 0,
> + .board_info = &i2c_camera,
> + .i2c_adapter_id = 0,
> + .power = i2c_camera_power,
> + .query_bus_param = isi_camera_query_bus_param,
> +};
> +
> +static struct platform_device isi_ov2640 = {
> + .name = "soc-camera-pdrv",
> + .id = 0,
> + .dev = {
> + .platform_data = &iclink_ov2640,
> + },
> +};
> +#endif
> +
> +
> +/*
> * LCD Controller
> */
> #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
> @@ -378,7 +450,12 @@ static struct gpio_led ek_pwm_led[] = {
> #endif
> };
>
> -
> +static struct platform_device *devices[] __initdata = {
> +#if defined(CONFIG_SOC_CAMERA_OV2640) || \
> + defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
> + &isi_ov2640,
> +#endif
> +};
>
> static void __init ek_board_init(void)
> {
> @@ -400,6 +477,8 @@ static void __init ek_board_init(void)
> ek_add_device_nand();
> /* I2C */
> at91_add_device_i2c(0, NULL, 0);
> + /* ISI, using programmable clock as ISI_MCK */
> + at91_add_device_isi(&isi_data, 1);

s/1/true/

> /* LCD Controller */
> at91_add_device_lcdc(&ek_lcdc_data);
> /* Touch Screen */
> @@ -411,6 +490,8 @@ static void __init ek_board_init(void)
> /* LEDs */
> at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
> at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
> + /* Other platform devices */
> + platform_add_devices(devices, ARRAY_SIZE(devices));
> }
>
> MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
> --
> 1.6.3.3
>

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/


\
 
 \ /
  Last update: 2011-10-17 17:05    [W:0.098 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site