lkml.org 
[lkml]   [2011]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 12/21] m68k: drop unused Kconfig symbols
    Hi Paul,

    On 14/10/11 22:29, Paul Bolle wrote:
    > Signed-off-by: Paul Bolle<pebolle@tiscali.nl>
    > ---
    > arch/m68k/Kconfig | 28 +---------------------------
    > arch/m68k/Kconfig.nommu | 44 --------------------------------------------
    > 2 files changed, 1 insertions(+), 71 deletions(-)

    I have no problem with the changes. But it will clash with the
    reworking of the Kconfig files currently sitting in linux-next
    for merging in the 3.2 merge window.

    Regards
    Greg



    > diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
    > index 9e8ee9d..58c6496 100644
    > --- a/arch/m68k/Kconfig
    > +++ b/arch/m68k/Kconfig
    > @@ -149,32 +149,6 @@ config MULTIFACE_III_TTY
    >
    > To compile this driver as a module, choose M here.
    >
    > -config GVPIOEXT
    > - tristate "GVP IO-Extender support"
    > - depends on PARPORT=n&& ZORRO
    > - help
    > - If you want to use a GVP IO-Extender serial card in Linux, say Y.
    > - Otherwise, say N.
    > -
    > -config GVPIOEXT_LP
    > - tristate "GVP IO-Extender parallel printer support"
    > - depends on GVPIOEXT
    > - help
    > - Say Y to enable driving a printer from the parallel port on your
    > - GVP IO-Extender card, N otherwise.
    > -
    > -config GVPIOEXT_PLIP
    > - tristate "GVP IO-Extender PLIP support"
    > - depends on GVPIOEXT
    > - help
    > - Say Y to enable doing IP over the parallel port on your GVP
    > - IO-Extender card, N otherwise.
    > -
    > -config MAC_HID
    > - bool
    > - depends on INPUT_ADBHID
    > - default y
    > -
    > config HPDCA
    > tristate "HP DCA serial support"
    > depends on DIO&& SERIAL_8250
    > @@ -217,7 +191,7 @@ config DN_SERIAL
    >
    > config SERIAL_CONSOLE
    > bool "Support for serial port console"
    > - depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO)&& (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
    > + depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO)&& (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
    > ---help---
    > If you say Y here, it will be possible to use a serial port as the
    > system console (the system console is the device which receives all
    > diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.nommu
    > index ff46383..2b7f1e9 100644
    > --- a/arch/m68k/Kconfig.nommu
    > +++ b/arch/m68k/Kconfig.nommu
    > @@ -542,13 +542,6 @@ config SAVANTrosie1
    > help
    > Support for the Savant Rosie1 board.
    >
    > -config ROMFS_FROM_ROM
    > - bool "ROMFS image not RAM resident"
    > - depends on (NETtel || SNAPGEAR)
    > - help
    > - The ROMfs filesystem will stay resident in the FLASH/ROM, not be
    > - moved into RAM.
    > -
    > config PILOT
    > bool
    > default y
    > @@ -564,21 +557,11 @@ config FREESCALE
    > default y
    > depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3)
    >
    > -config HW_FEITH
    > - bool
    > - default y
    > - depends on (CLEOPATRA || CANCam || SCALES)
    > -
    > config senTec
    > bool
    > default y
    > depends on (COBRA5272 || COBRA5282)
    >
    > -config EMAC_INC
    > - bool
    > - default y
    > - depends on (SOM5282EM)
    > -
    > config SNEHA
    > bool
    > default y
    > @@ -673,33 +656,6 @@ config KERNELBASE
    > a system with the RAM based at address 0, and leaving enough room
    > for the theoretical maximum number of 256 vectors.
    >
    > -choice
    > - prompt "RAM bus width"
    > - default RAMAUTOBIT
    > -
    > -config RAMAUTOBIT
    > - bool "AUTO"
    > - help
    > - Select the physical RAM data bus size. Not needed on most platforms,
    > - so you can generally choose AUTO.
    > -
    > -config RAM8BIT
    > - bool "8bit"
    > - help
    > - Configure RAM bus to be 8 bits wide.
    > -
    > -config RAM16BIT
    > - bool "16bit"
    > - help
    > - Configure RAM bus to be 16 bits wide.
    > -
    > -config RAM32BIT
    > - bool "32bit"
    > - help
    > - Configure RAM bus to be 32 bits wide.
    > -
    > -endchoice
    > -
    > comment "ROM configuration"
    >
    > config ROM


    --
    ------------------------------------------------------------------------
    Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear.com
    SnapGear Group, McAfee PHONE: +61 7 3435 2888
    8 Gardner Close FAX: +61 7 3217 5323
    Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com


    \
     
     \ /
      Last update: 2011-10-17 03:05    [W:0.031 / U:29.144 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site