lkml.org 
[lkml]   [2011]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 8/8] PCI, sys: only create rescan under /sys/.../pci/devices/... for pci bridges
On 10/16/2011 08:55 AM, Greg KH wrote:

> On Sat, Oct 15, 2011 at 10:34:03PM -0700, Yinghai Lu wrote:
>> On 10/15/2011 07:39 PM, Greg KH wrote:
>>
>>>
>>> No, we already have a way to do this, this is not acceptable, sorry.
>>>
>>
>>
>> hope this one is ok...
>
> Nope, not at all, don't use #ifdef in .c files.
>
> Again, we have a way to do this, built into sysfs, that can dynamically
> know to add or not add, attributes when they are registered with the
> system.

thank you for the comments.

i got it. now introduce device type for pci dev.

please check if this one is what you want.

[PATCH -v3 8/8] PCI, sys: only create rescan under /sys/.../pci/devices/... for pci bridges

Current code will create rescan for every pci device,
that is not right. the device is already there, there is no reason to rescan it.

So only have rescan for pci bridges. less confusing

Also the rescan will rescan bridge's secondary bus instead of primary bus.

-v3: Use device_type for pci dev.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
drivers/pci/pci-sysfs.c | 39 +++++++++++++++++++++++++++++++++++++--
drivers/pci/pci.h | 1 +
drivers/pci/probe.c | 1 +
3 files changed, 39 insertions(+), 2 deletions(-)
Index: linux-2.6/drivers/pci/pci-sysfs.c
===================================================================
--- linux-2.6.orig/drivers/pci/pci-sysfs.c
+++ linux-2.6/drivers/pci/pci-sysfs.c
@@ -303,12 +303,15 @@ dev_rescan_store(struct device *dev, str

if (val) {
mutex_lock(&pci_remove_rescan_mutex);
- pci_rescan_bus(pdev->bus);
+ pci_rescan_bus(pdev->subordinate);
mutex_unlock(&pci_remove_rescan_mutex);
}
return count;
}

+static struct device_attribute pci_dev_bridge_rescan_attr =
+ __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_rescan_store);
+
static void remove_callback(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
@@ -358,8 +361,41 @@ dev_bus_rescan_store(struct device *dev,
}
return count;
}
+#endif
+

+static struct attribute *pci_dev_bridge_attrs[] = {
+#ifdef CONFIG_HOTPLUG
+ &pci_dev_bridge_rescan_attr.attr,
#endif
+ NULL,
+};
+
+static mode_t pci_dev_bridge_attrs_are_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ if (!pdev->subordinate)
+ return 0;
+
+ return a->mode;
+}
+
+static struct attribute_group pci_dev_bridge_attr_group = {
+ .attrs = pci_dev_bridge_attrs,
+ .is_visible = pci_dev_bridge_attrs_are_visible,
+};
+
+static const struct attribute_group *pci_dev_attr_groups[] = {
+ &pci_dev_bridge_attr_group,
+ NULL,
+};
+
+struct device_type pci_dev_type = {
+ .groups = pci_dev_attr_groups,
+};

struct device_attribute pci_dev_attrs[] = {
__ATTR_RO(resource),
@@ -383,7 +419,6 @@ struct device_attribute pci_dev_attrs[]
__ATTR(msi_bus, 0644, msi_bus_show, msi_bus_store),
#ifdef CONFIG_HOTPLUG
__ATTR(remove, (S_IWUSR|S_IWGRP), NULL, remove_store),
- __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_rescan_store),
#endif
__ATTR_NULL,
};
Index: linux-2.6/drivers/pci/pci.h
===================================================================
--- linux-2.6.orig/drivers/pci/pci.h
+++ linux-2.6/drivers/pci/pci.h
@@ -159,6 +159,7 @@ static inline int pci_no_d1d2(struct pci
}
extern struct device_attribute pci_dev_attrs[];
extern struct device_attribute pcibus_dev_attrs[];
+extern struct device_type pci_dev_type;
#ifdef CONFIG_HOTPLUG
extern struct bus_attribute pci_bus_attrs[];
#else
Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c
+++ linux-2.6/drivers/pci/probe.c
@@ -902,6 +902,7 @@ int pci_setup_device(struct pci_dev *dev
dev->sysdata = dev->bus->sysdata;
dev->dev.parent = dev->bus->bridge;
dev->dev.bus = &pci_bus_type;
+ dev->dev.type = &pci_dev_type;
dev->hdr_type = hdr_type & 0x7f;
dev->multifunction = !!(hdr_type & 0x80);
dev->error_state = pci_channel_io_normal;

\
 
 \ /
  Last update: 2011-10-17 01:37    [from the cache]
©2003-2011 Jasper Spaans