lkml.org 
[lkml]   [2011]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 4/5] x86, ioapic: Seperate print_IO_APIC() to only print one io apic
It is getting too big after interrupt remaping entries debug print out
was added.

Original print_IO_APIC become print_IO_APICs.
New print_IO_APIC will only print one ioapic registers

It will make checpatch.pl happy with removing indent warning..

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
arch/x86/kernel/apic/io_apic.c | 46 +++++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 22 deletions(-)

Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1512,30 +1512,14 @@ static void __init setup_timer_IRQ0_pin(
ioapic_write_entry(apic_id, pin, entry);
}

-
-__apicdebuginit(void) print_IO_APIC(void)
+__apicdebuginit(void) print_IO_APIC(int apic)
{
- int apic, i;
+ int i;
union IO_APIC_reg_00 reg_00;
union IO_APIC_reg_01 reg_01;
union IO_APIC_reg_02 reg_02;
union IO_APIC_reg_03 reg_03;
unsigned long flags;
- struct irq_cfg *cfg;
- unsigned int irq;
-
- printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
- for (i = 0; i < nr_ioapics; i++)
- printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
- mpc_ioapic_id(i), ioapics[i].nr_registers);
-
- /*
- * We are a bit conservative about what we expect. We have to
- * know about every hardware change ASAP.
- */
- printk(KERN_INFO "testing the IO APIC.......................\n");
-
- for (apic = 0; apic < nr_ioapics; apic++) {

raw_spin_lock_irqsave(&ioapic_lock, flags);
reg_00.raw = io_apic_read(apic, 0);
@@ -1636,7 +1620,27 @@ __apicdebuginit(void) print_IO_APIC(void
);
}
}
- }
+}
+
+__apicdebuginit(void) print_IO_APICs(void)
+{
+ int apic, i;
+ struct irq_cfg *cfg;
+ unsigned int irq;
+
+ printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
+ for (i = 0; i < nr_ioapics; i++)
+ printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
+ mpc_ioapic_id(i), ioapics[i].nr_registers);
+
+ /*
+ * We are a bit conservative about what we expect. We have to
+ * know about every hardware change ASAP.
+ */
+ printk(KERN_INFO "testing the IO APIC.......................\n");
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ print_IO_APIC(apic);

printk(KERN_DEBUG "IRQ to pin mappings:\n");
for_each_active_irq(irq) {
@@ -1655,8 +1659,6 @@ __apicdebuginit(void) print_IO_APIC(void
}

printk(KERN_INFO ".................................... done.\n");
-
- return;
}

__apicdebuginit(void) print_APIC_field(int base)
@@ -1850,7 +1852,7 @@ __apicdebuginit(int) print_ICs(void)
return 0;

print_local_APICs(show_lapic);
- print_IO_APIC();
+ print_IO_APICs();

return 0;
}

\
 
 \ /
  Last update: 2011-10-12 09:37    [W:0.106 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site