lkml.org 
[lkml]   [2011]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 07/10] staging: et131x: move et131x_defs.h contents into et131x.c
    Date
    Move et131x_defs.h contents into et131x.c and delete et131x_defs.h

    Signed-off-by: Mark Einon <mark.einon@gmail.com>
    ---
    drivers/staging/et131x/et131x.c | 66 +++++++++++++++++-
    drivers/staging/et131x/et131x_defs.h | 128 ----------------------------------
    2 files changed, 64 insertions(+), 130 deletions(-)
    delete mode 100644 drivers/staging/et131x/et131x_defs.h

    diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
    index e88c277..402ab7f 100644
    --- a/drivers/staging/et131x/et131x.c
    +++ b/drivers/staging/et131x/et131x.c
    @@ -53,8 +53,6 @@
    *
    */

    -#include "et131x_defs.h"
    -
    #include <linux/pci.h>
    #include <linux/init.h>
    #include <linux/module.h>
    @@ -124,6 +122,70 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver "
    #define INT_MASK_ENABLE 0xfffebf17
    #define INT_MASK_ENABLE_NO_FLOW 0xfffebfd7

    +/* General defines */
    +/* Packet and header sizes */
    +#define NIC_MIN_PACKET_SIZE 60
    +
    +/* Multicast list size */
    +#define NIC_MAX_MCAST_LIST 128
    +
    +/* Supported Filters */
    +#define ET131X_PACKET_TYPE_DIRECTED 0x0001
    +#define ET131X_PACKET_TYPE_MULTICAST 0x0002
    +#define ET131X_PACKET_TYPE_BROADCAST 0x0004
    +#define ET131X_PACKET_TYPE_PROMISCUOUS 0x0008
    +#define ET131X_PACKET_TYPE_ALL_MULTICAST 0x0010
    +
    +/* Tx Timeout */
    +#define ET131X_TX_TIMEOUT (1 * HZ)
    +#define NIC_SEND_HANG_THRESHOLD 0
    +
    +/* MP_TCB flags */
    +#define fMP_DEST_MULTI 0x00000001
    +#define fMP_DEST_BROAD 0x00000002
    +
    +/* MP_ADAPTER flags */
    +#define fMP_ADAPTER_RECV_LOOKASIDE 0x00000004
    +#define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008
    +#define fMP_ADAPTER_SECONDARY 0x00000010
    +
    +/* MP_SHARED flags */
    +#define fMP_ADAPTER_SHUTDOWN 0x00100000
    +#define fMP_ADAPTER_LOWER_POWER 0x00200000
    +
    +#define fMP_ADAPTER_NON_RECOVER_ERROR 0x00800000
    +#define fMP_ADAPTER_RESET_IN_PROGRESS 0x01000000
    +#define fMP_ADAPTER_NO_CABLE 0x02000000
    +#define fMP_ADAPTER_HARDWARE_ERROR 0x04000000
    +#define fMP_ADAPTER_REMOVE_IN_PROGRESS 0x08000000
    +#define fMP_ADAPTER_HALT_IN_PROGRESS 0x10000000
    +
    +#define fMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000
    +#define fMP_ADAPTER_NOT_READY_MASK 0x3ff00000
    +
    +/* Some offsets in PCI config space that are actually used. */
    +#define ET1310_PCI_MAX_PYLD 0x4C
    +#define ET1310_PCI_MAC_ADDRESS 0xA4
    +#define ET1310_PCI_EEPROM_STATUS 0xB2
    +#define ET1310_PCI_ACK_NACK 0xC0
    +#define ET1310_PCI_REPLAY 0xC2
    +#define ET1310_PCI_L0L1LATENCY 0xCF
    +
    +/* PCI Vendor/Product IDs */
    +#define ET131X_PCI_VENDOR_ID 0x11C1 /* Agere Systems */
    +#define ET131X_PCI_DEVICE_ID_GIG 0xED00 /* ET1310 1000 Base-T 8 */
    +#define ET131X_PCI_DEVICE_ID_FAST 0xED01 /* ET1310 100 Base-T */
    +
    +/* Define order of magnitude converter */
    +#define NANO_IN_A_MICRO 1000
    +
    +#define PARM_RX_NUM_BUFS_DEF 4
    +#define PARM_RX_TIME_INT_DEF 10
    +#define PARM_RX_MEM_END_DEF 0x2bc
    +#define PARM_TX_TIME_INT_DEF 40
    +#define PARM_TX_NUM_BUFS_DEF 4
    +#define PARM_DMA_CACHE_DEF 0
    +
    /* ADAPTER defines */
    /*
    * Do not change these values: if changed, then change also in respective
    diff --git a/drivers/staging/et131x/et131x_defs.h b/drivers/staging/et131x/et131x_defs.h
    deleted file mode 100644
    index 872a5af..0000000
    --
    1.7.6.4


    \
     
     \ /
      Last update: 2011-10-12 23:43    [W:0.047 / U:0.684 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site