lkml.org 
[lkml]   [2011]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PCIe can not rescan for new PCIe device ( FPGA board )

>>>> * But our software returns : 0xFFFFFFFF
> This is reading from your device's memory region. It looks like the
> device is configured correctly (BAR values are reasonable and memory
> decoding is enabled) and I assume the bridges leading to it are
> configured correctly (if you posted the complete dmesg log we could
> tell for sure). After that point, Linux is out of the way and it's
> just a question of whether your device responds correctly to the
> memory access.
> Are you sure the device is supposed to return something other than
> 0xFFFFFFFF?

Hi Bjorn,

Yes, the device should return something similar to :
resource file = /sys/bus/pci/devices/0000:02:00.0/resource
base address = 0xFDFFE000
0xFDFFE000 0x00000000 0x00000000 0x00000000
0xFDFFE008 0x00000008 0x00000000 0x00000000
0xFDFFE010 0x00000010 0x00000001 0x00020000
0xFDFFE018 0x00000018 0x00000000 0x00000000
0xFDFFE020 0x00000020 0x00000000 0x00000000
0xFDFFE028 0x00000028 0x00000000 0x00000000
0xFDFFE030 0x00000030 0x00000000 0x00000000
0xFDFFE038 0x00000038 0x00000000 0x00000000
0xFDFFE040 0x00000040 0x30012009 0x00101449
0xFDFFE048 0x00000048 0x00000000 0x00000781
0xFDFFE050 0x00000050 0x00000000 0x00000300
0xFDFFE058 0x00000058 0xCAFEBABE 0xDEADBEEF

> If it's memory, can you write to it and read the new
> value back? Can you use a PCIe analyzer and see if the device is
> responding correctly on the bus?
I have tried to write to the FPGA registers but I was always getting
0xFFFFFFFF
>
> Other than the possible pciehp rescan problem, this just looks like a
> problem with your FPGA.
Can it have a relation with the BIOS?
I attached to you the whole dmesg log.

Cheers,
Ghani

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.40.3-0.119.delos.i686 (root@ash) (gcc version 4.6.0 20110603 (Red Hat 4.6.0-10) (GCC) ) #1 PREEMPT Fri Sep 30 15:59:08 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fb93000 (usable)
[ 0.000000] BIOS-e820: 000000002fb93000 - 000000002fbda000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fbda000 - 000000002fbe3000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002fbe3000 - 000000002fbe6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fbe6000 - 000000002fc09000 (reserved)
[ 0.000000] BIOS-e820: 000000002fc09000 - 000000002fc0a000 (usable)
[ 0.000000] BIOS-e820: 000000002fc0a000 - 000000002fc1a000 (reserved)
[ 0.000000] BIOS-e820: 000000002fc1a000 - 000000002fc22000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fc22000 - 000000002fc47000 (reserved)
[ 0.000000] BIOS-e820: 000000002fc47000 - 000000002fc8a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fc8a000 - 000000002ff00000 (usable)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[ 0.000000] e820 remove range: 000000002d800000 - ffffffffffffffff (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] user-defined physical RAM map:
[ 0.000000] user: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] user: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] user: 0000000000100000 - 000000002d800000 (usable)
[ 0.000000] user: 000000002fb93000 - 000000002fbda000 (ACPI NVS)
[ 0.000000] user: 000000002fbda000 - 000000002fbe3000 (ACPI data)
[ 0.000000] user: 000000002fbe3000 - 000000002fbe6000 (ACPI NVS)
[ 0.000000] user: 000000002fbe6000 - 000000002fc09000 (reserved)
[ 0.000000] user: 000000002fc0a000 - 000000002fc1a000 (reserved)
[ 0.000000] user: 000000002fc1a000 - 000000002fc22000 (ACPI NVS)
[ 0.000000] user: 000000002fc22000 - 000000002fc47000 (reserved)
[ 0.000000] user: 000000002fc47000 - 000000002fc8a000 (ACPI NVS)
[ 0.000000] user: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] user: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] user: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] user: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] user: 00000000fed61000 - 00000000fed71000 (reserved)
[ 0.000000] user: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] user: 00000000fef00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: /conga-BAF, BIOS BBRAR07 05/27/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x2d800 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 02FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 030000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 767MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 768MB, range: 256MB, type UC
[ 0.000000] total RAM covered: 767M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 512MB, range: 256MB, type WB
[ 0.000000] reg 2, base: 767MB, range: 1MB, type UC
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-000000002d800000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002d800000 page 2M
[ 0.000000] kernel direct mapping tables up to 2d800000 @ ffc000-1000000
[ 0.000000] log_buf_len: 134217728
[ 0.000000] early log buf free: 125435(95%)
[ 0.000000] RAMDISK: 2cb89000 - 2d7f0000
[ 0.000000] ACPI: RSDP 000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 2fbda068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 2fbe06f0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
[ 0.000000] ACPI: DSDT 2fbda150 06599 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 2fc21f40 00040
[ 0.000000] ACPI: APIC 2fbe07e8 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 2fbe0850 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 2fbe0890 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 2fbe08c8 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 2fbe0bd8 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 728MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2d800000
[ 0.000000] low ram: 0 - 2d800000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002d800
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0002d800
[ 0.000000] On node 0 totalpages: 186254
[ 0.000000] free_area_init_node: node 0, pgdat c09ea460, node_mem_map e45d9200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1424 pages used for memmap
[ 0.000000] Normal zone: 180848 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 2fc8a000 (gap: 2fc8a000:b0376000)
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 184798
[ 0.000000] Kernel command line: ro root=UUID=5f8f0e62-d5dd-461e-b2be-75a5caa782d0 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_IE SYSFONT=latarcyrheb-sun16 KEYTABLE=uk selinux=0 rhgb acpi=force mem=728M init=/sbin/upstart early_login fastboot debug loglevel=8 log_buf_len=99999999
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2981632 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 584188k/745472k available (3865k kernel code, 160828k reserved, 2252k data, 520k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffcf000 - 0xfffff000 ( 192 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xee000000 - 0xff7fe000 ( 279 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xed800000 ( 728 MB)
[ 0.000000] .init : 0xc09fa000 - 0xc0a7c000 ( 520 kB)
[ 0.000000] .data : 0xc07c64f4 - 0xc09f9800 (2252 kB)
[ 0.000000] .text : 0xc0400000 - 0xc07c64f4 (3865 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16
[ 0.000000] CPU 0 irqstacks, hard=e3c06000 soft=e3c08000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 999.970 MHz processor.
[ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.94 BogoMIPS (lpj=999970)
[ 0.001281] pid_max: default: 32768 minimum: 301
[ 0.002012] Security Framework initialized
[ 0.002163] SELinux: Disabled at boot.
[ 0.002433] Mount-cache hash table entries: 512
[ 0.002799] Initializing cgroup subsys cpuacct
[ 0.002941] Initializing cgroup subsys memory
[ 0.003028] Initializing cgroup subsys devices
[ 0.003166] Initializing cgroup subsys freezer
[ 0.003301] Initializing cgroup subsys net_cls
[ 0.003436] Initializing cgroup subsys blkio
[ 0.003582] Initializing cgroup subsys perf_event
[ 0.003777] mce: CPU supports 6 MCE banks
[ 0.004031] CPU: AMD G-T40N Processor stepping 00
[ 0.004322] ACPI: Core revision 20110413
[ 0.016033] ACPI: setting ELCR to 0200 (from 0cc0)
[ 0.016277] ftrace: allocating 22181 entries in 44 pages
[ 0.017145] Performance Events: AMD PMU driver.
[ 0.017339] ... version: 0
[ 0.017471] ... bit width: 48
[ 0.018008] ... generic registers: 4
[ 0.018140] ... value mask: 0000ffffffffffff
[ 0.018275] ... max period: 00007fffffffffff
[ 0.018410] ... fixed-purpose events: 0
[ 0.018541] ... event mask: 000000000000000f
[ 0.019559] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.019929] devtmpfs: initialized
[ 0.020266] PM: Registering ACPI NVS region at 2fb93000 (290816 bytes)
[ 0.020425] PM: Registering ACPI NVS region at 2fbe3000 (12288 bytes)
[ 0.020564] PM: Registering ACPI NVS region at 2fc1a000 (32768 bytes)
[ 0.020704] PM: Registering ACPI NVS region at 2fc47000 (274432 bytes)
[ 0.023682] atomic64 test passed for i586+ platform with CX8 and with SSE
[ 0.023862] Time: 18:45:50 Date: 08/28/11
[ 0.024103] NET: Registered protocol family 16
[ 0.024562] Extended Config Space enabled on 0 nodes
[ 0.024889] ACPI: bus type pci registered
[ 0.025171] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.025400] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.025535] PCI: Using MMCONFIG for extended config space
[ 0.025668] PCI: Using configuration type 1 for base access
[ 0.029064] bio: create slab <bio-0> at 0
[ 0.031805] ACPI: EC: Look up EC in DSDT
[ 0.035646] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.089742] ACPI: Interpreter enabled
[ 0.089884] ACPI: (supports S0 S3 S4 S5)
[ 0.090225] ACPI: Using PIC for interrupt routing
[ 0.138167] ACPI: Power Resource [FN00] (off)
[ 0.139528] ACPI: No dock devices found.
[ 0.139662] HEST: Table not found.
[ 0.139793] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.140588] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.141674] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.141816] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.141954] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 0.142000] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.142138] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.142361] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.142582] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff]
[ 0.142833] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.143071] pci 0000:00:01.0: [1002:9804] type 0 class 0x000300
[ 0.143227] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.143375] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.143521] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.143717] pci 0000:00:01.0: supports D1 D2
[ 0.144007] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
[ 0.144216] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.144358] pci 0000:00:04.0: PME# disabled
[ 0.144525] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
[ 0.144732] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.144873] pci 0000:00:05.0: PME# disabled
[ 0.145054] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.145217] pci 0000:00:11.0: reg 10: [io 0xf190-0xf197]
[ 0.145366] pci 0000:00:11.0: reg 14: [io 0xf180-0xf183]
[ 0.145513] pci 0000:00:11.0: reg 18: [io 0xf170-0xf177]
[ 0.145662] pci 0000:00:11.0: reg 1c: [io 0xf160-0xf163]
[ 0.145810] pci 0000:00:11.0: reg 20: [io 0xf150-0xf15f]
[ 0.146002] pci 0000:00:11.0: reg 24: [mem 0xfeb48000-0xfeb483ff]
[ 0.146168] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.146356] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.146513] pci 0000:00:12.0: reg 10: [mem 0xfeb47000-0xfeb47fff]
[ 0.146757] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.146920] pci 0000:00:12.2: reg 10: [mem 0xfeb46000-0xfeb460ff]
[ 0.147094] pci 0000:00:12.2: supports D1 D2
[ 0.147228] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.147369] pci 0000:00:12.2: PME# disabled
[ 0.147535] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.147690] pci 0000:00:13.0: reg 10: [mem 0xfeb45000-0xfeb45fff]
[ 0.148027] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.148191] pci 0000:00:13.2: reg 10: [mem 0xfeb44000-0xfeb440ff]
[ 0.148425] pci 0000:00:13.2: supports D1 D2
[ 0.148558] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.148699] pci 0000:00:13.2: PME# disabled
[ 0.148864] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.149104] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.149260] pci 0000:00:14.1: reg 10: [io 0xf140-0xf147]
[ 0.149408] pci 0000:00:14.1: reg 14: [io 0xf130-0xf133]
[ 0.149555] pci 0000:00:14.1: reg 18: [io 0xf120-0xf127]
[ 0.149703] pci 0000:00:14.1: reg 1c: [io 0xf110-0xf113]
[ 0.149851] pci 0000:00:14.1: reg 20: [io 0xf100-0xf10f]
[ 0.150054] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.150221] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.150440] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.150580] pci 0000:00:14.2: PME# disabled
[ 0.150734] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.151027] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.151241] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.151437] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.151629] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.151823] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.152047] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.152238] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.152429] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.152619] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.152909] pci 0000:01:00.0: [1814:0781] type 0 class 0x000280
[ 0.153016] pci 0000:01:00.0: reg 10: [mem 0xfea00000-0xfea0ffff]
[ 0.153263] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.153403] pci 0000:01:00.0: PME# disabled
[ 0.155025] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.155172] pci 0000:00:04.0: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.155396] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.155539] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.155825] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.155962] pci 0000:00:05.0: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.155999] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.156225] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.156530] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.156670] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.157000] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.157226] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.157449] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.157671] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.157893] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.157996] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.158219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.158443] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.158667] pci 0000:00:14.4: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[ 0.159015] pci_bus 0000:00: on NUMA node 0
[ 0.159149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.159794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.160334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.160581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.160841] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
[ 0.176540] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.177179] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.177869] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.178637] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.179331] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0
[ 0.180024] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0
[ 0.180682] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0
[ 0.181329] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 15) *0
[ 0.182128] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.182381] vgaarb: loaded
[ 0.182510] vgaarb: bridge control possible 0000:00:01.0
[ 0.182884] SCSI subsystem initialized
[ 0.183127] libata version 3.00 loaded.
[ 0.183406] usbcore: registered new interface driver usbfs
[ 0.183586] usbcore: registered new interface driver hub
[ 0.183796] usbcore: registered new device driver usb
[ 0.184165] PCI: Using ACPI for IRQ routing
[ 0.195932] PCI: pci_cache_line_size set to 64 bytes
[ 0.196143] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.196199] reserve RAM buffer: 000000002d800000 - 000000002fffffff
[ 0.196618] NetLabel: Initializing
[ 0.196870] NetLabel: domain hash size = 128
[ 0.196991] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197153] NetLabel: unlabeled traffic allowed by default
[ 0.197301] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.197571] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.199018] Switching to clocksource hpet
[ 0.200930] Switched to NOHz mode on CPU #0
[ 0.218344] pnp: PnP ACPI init
[ 0.218528] ACPI: bus type pnp registered
[ 0.219231] pnp 00:00: [bus 00-ff]
[ 0.219366] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.219502] pnp 00:00: [io 0x0000-0x03af window]
[ 0.219638] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.219774] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.219909] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.220074] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.223311] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.223446] pnp 00:00: [mem 0x40000000-0xffffffff window]
[ 0.223581] pnp 00:00: [mem 0x00000000 window]
[ 0.223842] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.224201] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.224460] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.224604] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.225467] pnp 00:02: [io 0x040b]
[ 0.225599] pnp 00:02: [io 0x04d6]
[ 0.225728] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.225857] pnp 00:02: [io 0x0c14]
[ 0.225985] pnp 00:02: [io 0x0c50-0x0c51]
[ 0.226142] pnp 00:02: [io 0x0c52]
[ 0.226273] pnp 00:02: [io 0x0c6c]
[ 0.226404] pnp 00:02: [io 0x0c6f]
[ 0.226536] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.226670] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.226808] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 0.226941] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 0.227099] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 0.227231] pnp 00:02: [io 0x0800-0x089f]
[ 0.227365] pnp 00:02: [io 0x0000-0xffffffff disabled]
[ 0.227501] pnp 00:02: [io 0x0000-0x000f]
[ 0.227633] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.227767] pnp 00:02: [io 0x0900-0x090f]
[ 0.227900] pnp 00:02: [io 0x0910-0x091f]
[ 0.228056] pnp 00:02: [io 0xfe00-0xfefe]
[ 0.228190] pnp 00:02: [io 0x0060-0x005f disabled]
[ 0.228326] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 0.228461] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.228597] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.228734] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 0.228869] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 0.229028] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 0.229163] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.229298] pnp 00:02: [mem 0xffc00000-0xffffffff]
[ 0.229587] system 00:02: [io 0x040b] has been reserved
[ 0.229728] system 00:02: [io 0x04d6] has been reserved
[ 0.229866] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.230032] system 00:02: [io 0x0c14] has been reserved
[ 0.230170] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.230309] system 00:02: [io 0x0c52] has been reserved
[ 0.230447] system 00:02: [io 0x0c6c] has been reserved
[ 0.230584] system 00:02: [io 0x0c6f] has been reserved
[ 0.230721] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.230860] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.230999] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.231161] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.231300] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.231439] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.231578] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.231716] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.231856] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.231995] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.232160] system 00:02: [mem 0xfec00000-0xfec00fff] has been reserved
[ 0.232302] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.232444] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.232585] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.232726] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.232868] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.233032] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.233175] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233872] pnp 00:03: [io 0x0000-0xffffffff disabled]
[ 0.234038] pnp 00:03: [io 0x0a00-0x0a0f]
[ 0.234174] pnp 00:03: [io 0x0000-0xffffffff disabled]
[ 0.234310] pnp 00:03: [io 0xffff]
[ 0.234442] pnp 00:03: [io 0xffff]
[ 0.234686] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.234828] system 00:03: [io 0xffff] has been reserved
[ 0.234966] system 00:03: [io 0xffff] has been reserved
[ 0.235133] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.236060] pnp 00:04: [dma 4]
[ 0.236194] pnp 00:04: [io 0x0000-0x000f]
[ 0.236327] pnp 00:04: [io 0x0081-0x0083]
[ 0.236460] pnp 00:04: [io 0x0087]
[ 0.236592] pnp 00:04: [io 0x0089-0x008b]
[ 0.236725] pnp 00:04: [io 0x008f]
[ 0.236858] pnp 00:04: [io 0x00c0-0x00df]
[ 0.237089] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.237261] pnp 00:05: [io 0x0070-0x0071]
[ 0.237396] pnp 00:05: [irq 8]
[ 0.237593] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.237756] pnp 00:06: [io 0x0061]
[ 0.237961] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.238205] pnp 00:07: [io 0x0010-0x001f]
[ 0.238338] pnp 00:07: [io 0x0022-0x003f]
[ 0.238468] pnp 00:07: [io 0x0044-0x005f]
[ 0.238598] pnp 00:07: [io 0x0072-0x007f]
[ 0.238727] pnp 00:07: [io 0x0080]
[ 0.238857] pnp 00:07: [io 0x0084-0x0086]
[ 0.238986] pnp 00:07: [io 0x0088]
[ 0.239142] pnp 00:07: [io 0x008c-0x008e]
[ 0.239272] pnp 00:07: [io 0x0090-0x009f]
[ 0.239402] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.239531] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.239661] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.239911] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.240079] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.240239] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.240371] pnp 00:08: [irq 13]
[ 0.240571] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.240850] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.241452] pnp 00:0a: [mem 0x30000000-0x3fffffff]
[ 0.241704] system 00:0a: [mem 0x30000000-0x3fffffff] has been reserved
[ 0.241845] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256284] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.256525] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.256673] pnp: PnP ACPI: found 12 devices
[ 0.256802] ACPI: ACPI bus type pnp unregistered
[ 0.296842] PCI: max bus depth: 1 pci_try_num: 2
[ 0.297060] pci 0000:00:05.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.297208] pci 0000:00:05.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.297445] pci 0000:00:05.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.297590] pci 0000:00:04.0: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.297826] pci 0000:00:04.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.297967] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.298129] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.298273] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.298416] pci 0000:00:04.0: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.298650] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.298787] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
[ 0.298928] pci 0000:00:05.0: bridge window [mem 0x40000000-0x401fffff]
[ 0.299095] pci 0000:00:05.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.299329] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.299463] pci 0000:00:14.4: bridge window [io disabled]
[ 0.299604] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.299745] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.300193] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.300333] PCI: setting IRQ 11 as level-triggered
[ 0.300473] pci 0000:00:04.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.300708] pci 0000:00:04.0: setting latency timer to 64
[ 0.301097] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
[ 0.301236] PCI: setting IRQ 7 as level-triggered
[ 0.301374] pci 0000:00:05.0: PCI INT A -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 0.301606] pci 0000:00:05.0: setting latency timer to 64
[ 0.301755] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.301891] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.302056] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.302194] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.302332] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.302471] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.302609] pci_bus 0000:00: resource 10 [mem 0x40000000-0xffffffff]
[ 0.302750] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.302887] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.303050] pci_bus 0000:01: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.303280] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.303417] pci_bus 0000:02: resource 1 [mem 0x40000000-0x401fffff]
[ 0.303557] pci_bus 0000:02: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.303787] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.303923] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.304084] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.304222] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.304360] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.304500] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.304639] pci_bus 0000:03: resource 10 [mem 0x40000000-0xffffffff]
[ 0.304853] NET: Registered protocol family 2
[ 0.305094] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.305512] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.306773] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.307243] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.307383] TCP reno registered
[ 0.307516] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.307662] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.308057] NET: Registered protocol family 1
[ 0.308227] pci 0000:00:01.0: Boot video device
[ 0.876145] PCI: CLS 64 bytes, default 64
[ 0.876428] Trying to unpack rootfs image as initramfs...
[ 1.882691] Freeing initrd memory: 12700k freed
[ 1.894871] apm: BIOS not found.
[ 1.895288] Intel AES-NI instructions are not detected.
[ 1.899046] audit: initializing netlink socket (disabled)
[ 1.899208] type=2000 audit(1314557151.898:1): initialized
[ 1.948207] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.959214] VFS: Disk quotas dquot_6.5.2
[ 1.959492] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.961284] msgmni has been set to 1165
[ 1.962316] alg: No test for stdrng (krng)
[ 1.962468] NET: Registered protocol family 38
[ 1.962752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.963085] io scheduler noop registered
[ 1.963221] io scheduler deadline registered
[ 1.963399] io scheduler cfq registered (default)
[ 1.963952] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.971579] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.982035] ACPI: AC Adapter [ADP1] (on-line)
[ 1.982395] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.982634] ACPI: Power Button [PWRB]
[ 1.982931] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.983190] ACPI: Power Button [PWRF]
[ 1.987153] ACPI: Fan [FAN0] (off)
[ 1.987631] ACPI: acpi_idle registered with cpuidle
[ 2.030408] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.030552] ACPI: Thermal Zone [TZ00] (65 C)
[ 2.031171] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.031312] ACPI: Thermal Zone [TZ01] (65 C)
[ 2.031546] ERST: Table is not found!
[ 2.031715] isapnp: Scanning for PnP cards...
[ 2.046109] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.046362] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.061638] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.061886] ACPI: Battery Slot [BAT2] (battery absent)
[ 2.410402] isapnp: No Plug & Play device found
[ 2.410753] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.420076] Non-volatile memory driver v1.3
[ 2.420218] Linux agpgart interface v0.103
[ 2.424149] brd: module loaded
[ 2.425945] loop: module loaded
[ 2.426320] ahci 0000:00:11.0: version 3.0
[ 2.426736] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
[ 2.426875] PCI: setting IRQ 6 as level-triggered
[ 2.427047] ahci 0000:00:11.0: PCI INT A -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6
[ 2.427454] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.427690] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.429588] scsi0 : ahci
[ 2.430047] scsi1 : ahci
[ 2.430373] scsi2 : ahci
[ 2.430667] scsi3 : ahci
[ 2.431560] ata1: SATA max UDMA/133 abar m1024@0xfeb48000 port 0xfeb48100 irq 6
[ 2.431795] ata2: SATA max UDMA/133 abar m1024@0xfeb48000 port 0xfeb48180 irq 6
[ 2.432051] ata3: SATA max UDMA/133 abar m1024@0xfeb48000 port 0xfeb48200 irq 6
[ 2.432293] ata4: SATA max UDMA/133 abar m1024@0xfeb48000 port 0xfeb48280 irq 6
[ 2.432874] Fixed MDIO Bus: probed
[ 2.433235] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.433421] ehci_hcd 0000:00:12.2: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 2.433685] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.433941] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.434237] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.434512] QUIRK: Enable AMD PLL fix
[ 2.434661] ehci_hcd 0000:00:12.2: debug port 1
[ 2.434823] ehci_hcd 0000:00:12.2: irq 7, io mem 0xfeb46000
[ 2.440049] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.440272] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.440410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.440631] usb usb1: Product: EHCI Host Controller
[ 2.440762] usb usb1: Manufacturer: Linux 2.6.40.3-0.119.delos.i686 ehci_hcd
[ 2.440899] usb usb1: SerialNumber: 0000:00:12.2
[ 2.441360] hub 1-0:1.0: USB hub found
[ 2.441503] hub 1-0:1.0: 5 ports detected
[ 2.441824] ehci_hcd 0000:00:13.2: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 2.442104] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.442348] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.442585] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.442854] ehci_hcd 0000:00:13.2: debug port 1
[ 2.443040] ehci_hcd 0000:00:13.2: irq 7, io mem 0xfeb44000
[ 2.449053] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.449253] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.449396] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.449622] usb usb2: Product: EHCI Host Controller
[ 2.449756] usb usb2: Manufacturer: Linux 2.6.40.3-0.119.delos.i686 ehci_hcd
[ 2.449896] usb usb2: SerialNumber: 0000:00:13.2
[ 2.450319] hub 2-0:1.0: USB hub found
[ 2.450461] hub 2-0:1.0: 5 ports detected
[ 2.450780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.451272] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 2.451411] PCI: setting IRQ 10 as level-triggered
[ 2.451550] ohci_hcd 0000:00:12.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 2.451802] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.452088] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.452354] ohci_hcd 0000:00:12.0: irq 10, io mem 0xfeb47000
[ 2.507153] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.507296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.507524] usb usb3: Product: OHCI Host Controller
[ 2.507658] usb usb3: Manufacturer: Linux 2.6.40.3-0.119.delos.i686 ohci_hcd
[ 2.507798] usb usb3: SerialNumber: 0000:00:12.0
[ 2.508247] hub 3-0:1.0: USB hub found
[ 2.508392] hub 3-0:1.0: 5 ports detected
[ 2.508698] ohci_hcd 0000:00:13.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 2.508950] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.509231] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 2.509491] ohci_hcd 0000:00:13.0: irq 10, io mem 0xfeb45000
[ 2.564122] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.564265] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.564492] usb usb4: Product: OHCI Host Controller
[ 2.564627] usb usb4: Manufacturer: Linux 2.6.40.3-0.119.delos.i686 ohci_hcd
[ 2.564766] usb usb4: SerialNumber: 0000:00:13.0
[ 2.565209] hub 4-0:1.0: USB hub found
[ 2.565355] hub 4-0:1.0: 5 ports detected
[ 2.565664] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.565985] usbcore: registered new interface driver usbserial
[ 2.566184] USB Serial support registered for generic
[ 2.566353] usbcore: registered new interface driver usbserial_generic
[ 2.566494] usbserial: USB Serial Driver core
[ 2.566754] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.567897] mousedev: PS/2 mouse device common for all mice
[ 2.568449] rtc_cmos 00:05: RTC can wake from S4
[ 2.568781] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.568950] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.569396] device-mapper: uevent: version 1.0.3
[ 2.569781] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.570305] cpuidle: using governor ladder
[ 2.570546] cpuidle: using governor menu
[ 2.571041] EFI Variables Facility v0.08 2004-May-17
[ 2.571596] usbcore: registered new interface driver usbhid
[ 2.571730] usbhid: USB HID core driver
[ 2.572189] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.572354] TCP cubic registered
[ 2.572480] Initializing XFRM netlink socket
[ 2.572627] NET: Registered protocol family 17
[ 2.572799] Registering the dns_resolver key type
[ 2.573240] PM: Hibernation image not present or could not be loaded.
[ 2.573412] registered taskstats version 1
[ 2.576300] IMA: No TPM chip found, activating TPM-bypass!
[ 2.577096] Magic number: 7:263:798
[ 2.577375] rtc_cmos 00:05: setting system clock to 2011-08-28 18:45:53 UTC (1314557153)
[ 2.577840] Initializing network drop monitor service
[ 2.737065] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.740066] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.740255] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.740432] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.740661] Freeing unused kernel memory: 520k freed
[ 2.741467] Write protecting the kernel text: 3868k
[ 2.741685] Write protecting the kernel read-only data: 1860k
[ 2.743093] usb 1-2: new high speed USB device number 2 using ehci_hcd
[ 2.825134] dracut: dracut-009-12.fc15
[ 2.853059] dracut: rd.luks=0: removing cryptoluks activation
[ 2.861697] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 2.861850] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.861991] usb 1-2: Product: USB2.0 Hub
[ 2.863188] hub 1-2:1.0: USB hub found
[ 2.863685] hub 1-2:1.0: 4 ports detected
[ 2.871882] udev[90]: starting version 167
[ 2.896066] Refined TSC clocksource calibration: 999.999 MHz.
[ 2.896226] Switching to clocksource tsc
[ 3.018138] [drm] Initialized drm 1.1.0 20060810
[ 3.072457] [drm] radeon defaulting to kernel modesetting.
[ 3.072608] [drm] radeon kernel modesetting enabled.
[ 3.072857] radeon 0000:00:01.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 3.073120] radeon 0000:00:01.0: setting latency timer to 64
[ 3.073910] [drm] initializing kernel modesetting (PALM 0x1002:0x9804 0x1022:0x1511).
[ 3.074270] [drm] register mmio base: 0xFEB00000
[ 3.074405] [drm] register mmio size: 262144
[ 3.074862] ATOM BIOS: AMD
[ 3.075080] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 3.075315] radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 3.075651] [drm] Detected VRAM RAM=256M, BAR=256M
[ 3.075801] [drm] RAM width 32bits DDR
[ 3.076141] [TTM] Zone kernel: Available graphics memory: 298704 kiB.
[ 3.076283] [TTM] Initializing pool allocator.
[ 3.076476] [drm] radeon: 256M of VRAM memory ready
[ 3.076611] [drm] radeon: 512M of GTT memory ready.
[ 3.076786] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.076923] [drm] Driver supports precise vblank timestamp query.
[ 3.077121] [drm] radeon: irq initialized.
[ 3.077261] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.080221] [drm] Loading PALM Microcode
[ 3.103953] radeon 0000:00:01.0: WB enabled
[ 3.120979] [drm] ring test succeeded in 1 usecs
[ 3.121425] [drm] radeon: ib pool ready.
[ 3.121738] [drm] ib test succeeded in 0 usecs
[ 3.121884] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 3.128856] [drm] Radeon Display Connectors
[ 3.128999] [drm] Connector 0:
[ 3.129162] [drm] LVDS
[ 3.129292] [drm] HPD1
[ 3.129424] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 3.129650] [drm] Encoders:
[ 3.129780] [drm] LCD1: INTERNAL_UNIPHY
[ 3.129911] [drm] LCD1: TRAVIS
[ 3.130063] [drm] Connector 1:
[ 3.130192] [drm] DisplayPort
[ 3.130321] [drm] HPD2
[ 3.130452] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 3.130676] [drm] Encoders:
[ 3.130805] [drm] DFP1: INTERNAL_UNIPHY
[ 3.130936] [drm] Connector 2:
[ 3.131085] [drm] VGA
[ 3.131215] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 3.131441] [drm] Encoders:
[ 3.131570] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.253040] usb 4-2: new full speed USB device number 2 using ohci_hcd
[ 3.259054] [drm] Radeon display connector LVDS-1: No monitor connected or invalid EDID
[ 3.387052] [drm] Radeon display connector DP-1: No monitor connected or invalid EDID
[ 3.398125] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[ 3.411183] [drm] Internal thermal controller without fan control
[ 3.411647] [drm] radeon: power management initialized
[ 3.420100] usb 4-2: New USB device found, idVendor=0afa, idProduct=03e8
[ 3.420250] usb 4-2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 3.649064] usb 3-4: new low speed USB device number 2 using ohci_hcd
[ 3.804118] usb 3-4: New USB device found, idVendor=413c, idProduct=2003
[ 3.804264] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.804407] usb 3-4: Product: Dell USB Keyboard
[ 3.804540] usb 3-4: Manufacturer: Dell
[ 3.812813] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/input/input2
[ 3.813355] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:12.0-4/input0
[ 3.877448] usb 1-2.1: new high speed USB device number 4 using ehci_hcd
[ 3.943372] [drm] fb mappable at 0xD0141000
[ 3.943508] [drm] vram apper at 0xD0000000
[ 3.943641] [drm] size 3145728
[ 3.943770] [drm] fb depth is 24
[ 3.943900] [drm] pitch is 4096
[ 3.944367] fbcon: radeondrmfb (fb0) is primary device
[ 3.956917] usb 1-2.1: New USB device found, idVendor=9710, idProduct=7830
[ 3.956926] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.956933] usb 1-2.1: Product: UA0025C
[ 3.956939] usb 1-2.1: Manufacturer: Moschip Semiconductor
[ 3.956944] usb 1-2.1: SerialNumber: 6e003e8f
[ 4.038447] Console: switching to colour frame buffer device 128x48
[ 4.049593] fb0: radeondrmfb frame buffer device
[ 4.049694] drm: registered panic notifier
[ 4.049796] [drm] Initialized radeon 2.10.0 20080528 for 0000:00:01.0 on minor 0
[ 4.098364] dracut: Starting plymouth daemon
[ 4.609975] pata_atiixp 0000:00:14.1: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 4.625103] scsi4 : pata_atiixp
[ 4.627682] scsi5 : pata_atiixp
[ 4.627853] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 4.627862] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 4.812666] ata5.00: CFA: InnoDisk Corp. - EDC4000 H 8GB, 080414, max UDMA/66
[ 4.812679] ata5.00: 16128000 sectors, multi 2: LBA
[ 4.812692] ata5.00: limited to UDMA/33 due to 40-wire cable
[ 4.815370] ata5.00: configured for UDMA/33
[ 4.815672] scsi 4:0:0:0: Direct-Access ATA InnoDisk Corp. - 0804 PQ: 0 ANSI: 5
[ 4.816143] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 4.816379] sd 4:0:0:0: [sda] 16128000 512-byte logical blocks: (8.25 GB/7.69 GiB)
[ 4.816560] sd 4:0:0:0: [sda] Write Protect is off
[ 4.816570] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.816648] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.819976] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 4.821418] sd 4:0:0:0: [sda] Attached SCSI disk
[ 5.290607] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 5.294504] SGI XFS Quota Management subsystem
[ 5.295818] XFS (sda2): Mounting Filesystem
[ 6.184147] XFS (sda2): Ending clean mount
[ 6.210169] dracut: Remounting /dev/disk/by-uuid/5f8f0e62-d5dd-461e-b2be-75a5caa782d0 with -o ro,
[ 6.214510] XFS (sda2): Mounting Filesystem
[ 6.867419] XFS (sda2): Ending clean mount
[ 6.871984] dracut: Mounted root filesystem /dev/sda2
[ 6.979478] dracut: Switching root
[ 7.604918] udev[312]: starting version 167
[ 7.955100] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 7.969576] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 7.969738] SP5100 TCO timer: mmio address 0xbafe00 already in use
[ 8.059849] cfg80211: Calling CRDA to update world regulatory domain
[ 8.289449] input: USB Touchscreen 0afa:03e8 as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/input/input3
[ 8.289729] usbcore: registered new interface driver usbtouchscreen
[ 8.471440] mcs7830_async_cmd_callback() failed with -32
[ 8.472055] usb 1-2.1: applying rev.C fixup
[ 8.476048] usb 1-2.1: applying rev.C fixup
[ 8.483971] MOSCHIP usb-ethernet driver 1-2.1:1.0: eth0: register 'MOSCHIP usb-ethernet driver' at usb-0000:00:12.2-2.1, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:60:6e:00:01:99
[ 8.484071] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 8.972791] HDA Intel 0000:00:14.2: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 8.972808] ALSA sound/pci/hda/hda_intel.c:2413 Using LPIB position fix
[ 8.976441] rt2800pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 8.976465] rt2800pci 0000:01:00.0: setting latency timer to 64
[ 8.982177] ALSA sound/pci/hda/hda_intel.c:1490 Enable sync_write for stable communication
[ 8.984822] ALSA sound/pci/hda/hda_intel.c:2772 Applying patch firmware 'delos-hda-settings'
[ 9.030394] ALSA sound/pci/hda/hda_codec.c:4707 autoconfig: line_outs=4 (0x1f/0x22/0x1c/0x23/0x0) type:line
[ 9.030409] ALSA sound/pci/hda/hda_codec.c:4711 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.030419] ALSA sound/pci/hda/hda_codec.c:4715 hp_outs=1 (0x20/0x0/0x0/0x0/0x0)
[ 9.030427] ALSA sound/pci/hda/hda_codec.c:4716 mono: mono_out=0x0
[ 9.030434] ALSA sound/pci/hda/hda_codec.c:4719 dig-out=0x25/0x0
[ 9.030440] ALSA sound/pci/hda/hda_codec.c:4720 inputs:
[ 9.030448] ALSA sound/pci/hda/hda_codec.c:4724 Mic=0x1d
[ 9.030455] ALSA sound/pci/hda/hda_codec.c:4724 Front Mic=0x21
[ 9.030462] ALSA sound/pci/hda/hda_codec.c:4724 Line=0x1e
[ 9.030469] ALSA sound/pci/hda/hda_codec.c:4724 CD=0x24
[ 9.030475] ALSA sound/pci/hda/hda_codec.c:4726
[ 9.030481] ALSA sound/pci/hda/hda_codec.c:4728 dig-in=0x26
[ 9.052058] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.052485] Registered led device: rt2800pci-phy0::radio
[ 9.052542] Registered led device: rt2800pci-phy0::assoc
[ 9.052598] Registered led device: rt2800pci-phy0::quality
[ 9.277094] cgosdrv: module license 'Free as is' taints kernel.
[ 9.277105] Disabling lock debugging due to kernel taint
[ 9.896301] pciehp: pcie_port_service_register = 0
[ 9.896311] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 10.452327] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.460644] XFS (sda8): Mounting Filesystem
[ 10.668840] XFS (sda8): Ending clean mount
[ 10.676622] XFS (sda7): Mounting Filesystem
[ 10.947419] XFS (sda7): Ending clean mount
[ 10.981267] XFS (sda5): Mounting Filesystem
[ 11.221351] XFS (sda5): Ending clean mount
[ 11.328180] Adding 262140k swap on /dev/sda6. Priority:-1 extents:1 across:262140k
[ 11.484929] upstart: system-setup-keyboard main process (635) terminated with status 1
[ 11.720593] XFS (sda9): Mounting Filesystem
[ 12.244254] XFS (sda9): Ending clean mount
[ 12.976895] upstart: Unable to connect to the system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
[ 13.181856] upstart: haldaemon main process (757) terminated with status 1
[ 13.181963] upstart: haldaemon main process ended, respawning
[ 14.045096] NET: Registered protocol family 10
[ 15.029399] XFS (sda9): Mounting Filesystem
[ 15.664568] XFS (sda9): Ending clean mount
[ 17.430656] upstart: ezono-cyclades-second_phase_upgrade pre-start process (1254) terminated with status 74
[ 17.439606] upstart: ezono-cyclades-calibration pre-start process (1257) terminated with status 73
[ 25.762026] eth0: no IPv6 routers present
[ 106.606890] pci 0000:02:00.0: [1234:0002] type 0 class 0x001180
[ 106.606939] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00000fff 64bit pref]
[ 106.606970] pci 0000:02:00.0: reg 18: [mem 0x00000000-0x0003ffff 64bit pref]
[ 106.607001] pci 0000:02:00.0: reg 20: [mem 0x00000000-0x00000fff 64bit pref]
[ 106.609195] radeon 0000:00:01.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 106.609221] pci 0000:02:00.0: BAR 2: assigned [mem 0x40200000-0x4023ffff 64bit pref]
[ 106.609241] pci 0000:02:00.0: BAR 2: set to [mem 0x40200000-0x4023ffff 64bit pref] (PCI address [0x40200000-0x4023ffff])
[ 106.609253] pci 0000:02:00.0: BAR 0: assigned [mem 0x40240000-0x40240fff 64bit pref]
[ 106.609271] pci 0000:02:00.0: BAR 0: set to [mem 0x40240000-0x40240fff 64bit pref] (PCI address [0x40240000-0x40240fff])
[ 106.609282] pci 0000:02:00.0: BAR 4: assigned [mem 0x40241000-0x40241fff 64bit pref]
[ 106.609300] pci 0000:02:00.0: BAR 4: set to [mem 0x40241000-0x40241fff 64bit pref] (PCI address [0x40241000-0x40241fff])
\
 
 \ /
  Last update: 2011-10-11 10:13    [W:0.144 / U:5.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site