lkml.org 
[lkml]   [2011]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pata_atiixp: add proper ->prereset method
Date
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_atiixp: add proper ->prereset method

Fixes PCI access before PCI resources are allocated.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
earlier references:
https://lkml.org/lkml/2009/11/25/320

drivers/ata/pata_atiixp.c | 35 ++++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 9 deletions(-)

Index: b/drivers/ata/pata_atiixp.c
===================================================================
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -49,6 +49,31 @@ static int atiixp_cable_detect(struct at
static DEFINE_SPINLOCK(atiixp_lock);

/**
+ * atiixp_prereset - perform reset handling
+ * @link: ATA link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Reset sequence checking enable bits to see which ports are
+ * active.
+ */
+
+static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
+{
+ static const struct pci_bits atiixp_enable_bits[] = {
+ { 0x48, 1, 0x01, 0x00 },
+ { 0x48, 1, 0x08, 0x00 }
+ };
+
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+ return -ENOENT;
+
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
* atiixp_set_pio_timing - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
@@ -221,6 +246,7 @@ static struct ata_port_operations atiixp
.bmdma_start = atiixp_bmdma_start,
.bmdma_stop = atiixp_bmdma_stop,

+ .prereset = atiixp_prereset,
.cable_detect = atiixp_cable_detect,
.set_piomode = atiixp_set_piomode,
.set_dmamode = atiixp_set_dmamode,
@@ -235,16 +261,7 @@ static int atiixp_init_one(struct pci_de
.udma_mask = ATA_UDMA5,
.port_ops = &atiixp_port_ops
};
- static const struct pci_bits atiixp_enable_bits[] = {
- { 0x48, 1, 0x01, 0x00 },
- { 0x48, 1, 0x08, 0x00 }
- };
const struct ata_port_info *ppi[] = { &info, &info };
- int i;
-
- for (i = 0; i < 2; i++)
- if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
- ppi[i] = &ata_dummy_port_info;

return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
ATA_HOST_PARALLEL_SCAN);

\
 
 \ /
  Last update: 2011-10-11 20:31    [W:0.073 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site