lkml.org 
[lkml]   [2011]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v8 0/3] Add support for tegra2 based ventana board
    Date
    This patch set adds support for the tegra2 based ventana development board.

    Boot tested on ventana.

    Uses a table based approach to select the correct init function.

    Provoke kernel warning when no suitable pinmux table can be found.

    Peter De Schrijver (3):
    arm/tegra: prepare Seaboard pinmux code for derived boards
    arm/tegra: add support for ventana pinmuxing
    arm/tegra: device tree support for ventana board

    arch/arm/boot/dts/tegra-ventana.dts | 32 ++++++++++++++
    arch/arm/mach-tegra/Kconfig | 6 +++
    arch/arm/mach-tegra/Makefile | 1 +
    arch/arm/mach-tegra/Makefile.boot | 1 +
    arch/arm/mach-tegra/board-dt.c | 5 ++-
    arch/arm/mach-tegra/board-seaboard-pinmux.c | 63 ++++++++++++++++++++++++---
    6 files changed, 101 insertions(+), 7 deletions(-)
    create mode 100644 arch/arm/boot/dts/tegra-ventana.dts



    \
     
     \ /
      Last update: 2011-10-11 12:47    [W:0.018 / U:30.524 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site