lkml.org 
[lkml]   [2011]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] Coding style in unioxx5.c KERN_ facility level and coding style warnings as reported by checkpatch.pl Signed-off-by: Michael Ahern <>
Date
From: mah <ahern.michael.t@gmail.com>

---
drivers/staging/comedi/drivers/unioxx5.c | 65 +++++++++++++++++++----------
1 files changed, 42 insertions(+), 23 deletions(-)

diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 598884e..334f036 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -72,13 +72,17 @@ Devices: [Fastwel] UNIOxx-5 (unioxx5),
#define ALL_2_INPUT 0 /* config all digital channels to input */
#define ALL_2_OUTPUT 1 /* config all digital channels to output */

-/* 'private' structure for each subdevice */
+/* 'private' unioxx5 structure for each subdevice
+ usp_module_type - 12 modules. each can be 70L or 73L
+ usp_extra_data - for saving previous written value for analog modules
+ usp_prev_wr_val - previous written value
+ usp_prev_cn_val - previous channel value */
struct unioxx5_subd_priv {
int usp_iobase;
- unsigned char usp_module_type[12]; /* 12 modules. each can be 70L or 73L */
- unsigned char usp_extra_data[12][4]; /* for saving previous written value for analog modules */
- unsigned char usp_prev_wr_val[3]; /* previous written value */
- unsigned char usp_prev_cn_val[3]; /* previous channel value */
+ unsigned char usp_module_type[12]; /* see comment above */
+ unsigned char usp_extra_data[12][4]; /* see comment above */
+ unsigned char usp_prev_wr_val[3]; /* see comment above */
+ unsigned char usp_prev_cn_val[3]; /* see comment above */
};

static int unioxx5_attach(struct comedi_device *dev,
@@ -99,7 +103,8 @@ static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
unsigned int *data, int channel, int minor);
static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
unsigned int *data, int channel, int minor);
-/* static void __unioxx5_digital_config(struct unioxx5_subd_priv* usp, int mode); */
+/* static void __unioxx5_digital_config(struct unioxx5_subd_priv* usp,
+ int mode); */
static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
unsigned int *data, int channel, int minor);
static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
@@ -139,8 +144,10 @@ static int unioxx5_attach(struct comedi_device *dev,
dev->iobase = iobase;
iobase += UNIOXX5_SUBDEV_BASE;

- /* defining number of subdevices and getting they types (it must be 'g01') */
- for (i = n_subd = 0, ba = iobase; i < 4; i++, ba += UNIOXX5_SUBDEV_ODDS) {
+ /* defining number of subdevices and getting types (it must be 'g01') */
+ for (i = n_subd = 0, ba = iobase; i < 4;
+ i++, ba += UNIOXX5_SUBDEV_ODDS) {
+
id = inb(ba + 0xE);
num = inb(ba + 0xF);

@@ -169,7 +176,7 @@ static int unioxx5_attach(struct comedi_device *dev,
return -1;
}

- printk("attached\n");
+ printk(KERN_INFO "attached\n");
return 0;
}

@@ -181,7 +188,8 @@ static int unioxx5_subdev_read(struct comedi_device *dev,
int channel, type;

channel = CR_CHAN(insn->chanspec);
- type = usp->usp_module_type[channel / 2]; /* defining module type(analog or digital) */
+ /* defining module type(analog or digital) */
+ type = usp->usp_module_type[channel / 2];

if (type == MODULE_DIGITAL) {
if (!__unioxx5_digital_read(usp, data, channel, dev->minor))
@@ -202,7 +210,8 @@ static int unioxx5_subdev_write(struct comedi_device *dev,
int channel, type;

channel = CR_CHAN(insn->chanspec);
- type = usp->usp_module_type[channel / 2]; /* defining module type(analog or digital) */
+ /* defining module type(analog or digital) */
+ type = usp->usp_module_type[channel / 2];

if (type == MODULE_DIGITAL) {
if (!__unioxx5_digital_write(usp, data, channel, dev->minor))
@@ -259,11 +268,16 @@ static int unioxx5_insn_config(struct comedi_device *dev,
/* *\
* sets channels buffer to 1(after this we are allowed to *
* change channel type on input or output) *
+ *
+ outb(flags, ...) - changes type of _one_ channel
+ outb(0, ...) - sets channels bank to 0(allows directly input/output)
+ usp-> ... flags - saves written value
+ *
\* */
outb(1, usp->usp_iobase + 0);
- outb(flags, usp->usp_iobase + channel_offset); /* changes type of _one_ channel */
- outb(0, usp->usp_iobase + 0); /* sets channels bank to 0(allows directly input/output) */
- usp->usp_prev_cn_val[channel_offset - 1] = flags; /* saves written value */
+ outb(flags, usp->usp_iobase + channel_offset); /* see comment above */
+ outb(0, usp->usp_iobase + 0); /* see above */
+ usp->usp_prev_cn_val[channel_offset - 1] = flags; /* see above */

return 0;
}
@@ -304,14 +318,14 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
}

usp->usp_iobase = subdev_iobase;
- printk("comedi%d: |", minor);
+ printk(KERN_ERR "comedi%d: |", minor);

/* defining modules types */
for (i = 0; i < 12; i++) {
to = 10000;

__unioxx5_analog_config(usp, i * 2);
- outb(i + 1, subdev_iobase + 5); /* sends channel number to card */
+ outb(i + 1, subdev_iobase + 5); /* sends channel num to card */
outb('H', subdev_iobase + 6); /* requests EEPROM world */
while (!(inb(subdev_iobase + 0) & TxBE))
; /* waits while writting will be allowed */
@@ -346,9 +360,9 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
subdev->range_table = &range_digital;
subdev->insn_read = unioxx5_subdev_read;
subdev->insn_write = unioxx5_subdev_write;
- subdev->insn_config = unioxx5_insn_config; /* for digital modules only!!! */
+ subdev->insn_config = unioxx5_insn_config; /* 4 digital modules only */

- printk("subdevice configured\n");
+ printk(KERN_INFO "subdevice configured\n");

return 0;
}
@@ -367,7 +381,8 @@ static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
return 0;
}

- val = usp->usp_prev_wr_val[channel_offset - 1]; /* getting previous written value */
+ /* getting previous written value */
+ val = usp->usp_prev_wr_val[channel_offset - 1];

if (*data)
val |= mask;
@@ -375,7 +390,7 @@ static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
val &= ~mask;

outb(val, usp->usp_iobase + channel_offset);
- usp->usp_prev_wr_val[channel_offset - 1] = val; /* saving new written value */
+ usp->usp_prev_wr_val[channel_offset - 1] = val; /* save new value */

return 1;
}
@@ -397,8 +412,9 @@ static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
*data = inb(usp->usp_iobase + channel_offset);
*data &= mask;

+ /* this operation is created for correct readed value to 0 or 1 */
if (channel_offset > 1)
- channel -= 2 << channel_offset; /* this operation is created for correct readed value to 0 or 1 */
+ channel -= 2 << channel_offset;

*data >>= channel;
return 1;
@@ -444,7 +460,9 @@ static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
usp->usp_extra_data[module][i] = (unsigned char)((*data & 0xFF00) >> 8);

/* while(!((inb(usp->usp_iobase + 0)) & TxBE)); */
- outb(module + 1, usp->usp_iobase + 5); /* sending module number to card(1 .. 12) */
+
+ /* sends module number to card(1 .. 12) */
+ outb(module + 1, usp->usp_iobase + 5);
outb('W', usp->usp_iobase + 6); /* sends (W)rite command to module */

/* sending for bytes to module(one byte per cycle iteration) */
@@ -475,7 +493,8 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
}

__unioxx5_analog_config(usp, channel);
- outb(module_no + 1, usp->usp_iobase + 5); /* sends module number to card(1 .. 12) */
+ /* sends module number to card(1 .. 12) */
+ outb(module_no + 1, usp->usp_iobase + 5);
outb('V', usp->usp_iobase + 6); /* sends to module (V)erify command */
control = inb(usp->usp_iobase); /* get control register byte */

--
1.7.0.4


\
 
 \ /
  Last update: 2011-01-10 00:09    [W:0.065 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site