lkml.org 
[lkml]   [2011]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] ECI: adding platform data for ECI driver
Date
From: Tapio Vihuri <tapio.vihuri@nokia.com>

Gives platform data for ECI accessory input driver and
ECI bus controller driver.

Signed-off-by: Tapio Vihuri <tapio.vihuri@nokia.com>
---
arch/x86/platform/mrst/mrst.c | 59 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 59 insertions(+), 0 deletions(-)

diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 79ae681..60dca78 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -14,6 +14,7 @@
#include <linux/sfi.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/platform_device.h>

#include <asm/setup.h>
#include <asm/mpspec_def.h>
@@ -309,3 +310,61 @@ static inline int __init setup_x86_mrst_timer(char *arg)
return 0;
}
__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+
+#if defined(CONFIG_ECI) || defined(CONFIG_ECI_MODULE)
+#include <linux/input/eci.h>
+
+#define GPIO_ECI_RSTn 126 /* GP_CORE_030 + 96 */
+#define GPIO_ECI_SW_CTRL 178 /* GP_CORE_082 + 96 */
+#define GPIO_ECI_INT 16 /* GP_AON_016 */
+
+static struct ecibus_platform_data medfield_ecibus_control = {
+ .ecibus_rst_gpio = GPIO_ECI_RSTn,
+ .ecibus_sw_ctrl_gpio = GPIO_ECI_SW_CTRL,
+ .ecibus_int_gpio = GPIO_ECI_INT,
+};
+
+/*
+ * This is just example, should be used in platform audio driver
+ * hsmic_event->event(hsmic_event->private, true)
+ */
+static void medfield_register_hsmic_event_cb(struct audio_hsmic_event *event)
+{
+ struct audio_hsmic_event *hsmic_event;
+
+ hsmic_event = event;
+}
+
+static struct eci_platform_data medfield_eci_platform_data = {
+ .register_hsmic_event_cb = medfield_register_hsmic_event_cb,
+};
+
+static struct platform_device medfield_ecibus_device = {
+ .name = "ecibus",
+ .id = 1,
+ .dev = {
+ .platform_data = &medfield_ecibus_control,
+ },
+};
+
+static struct platform_device medfield_eci_device = {
+ .name = "ECI_accessory",
+ .dev = {
+ .platform_data = &medfield_eci_platform_data,
+ },
+};
+
+static int __init medfield_ecibus_init(void)
+{
+ int retval;
+
+ retval = platform_device_register(&medfield_ecibus_device);
+ if (retval < 0)
+ return retval;
+
+ retval = platform_device_register(&medfield_eci_device);
+
+ return retval;
+}
+device_initcall(medfield_ecibus_init);
+#endif
--
1.6.5


\
 
 \ /
  Last update: 2011-01-04 15:05    [W:1.347 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site