lkml.org 
[lkml]   [2011]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] dmaengine i.MX sdma: set maximum segment size for our device
Date
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/dma/imx-sdma.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d5a5d4d..c503050 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -301,6 +301,7 @@ struct sdma_firmware_header {

struct sdma_engine {
struct device *dev;
+ struct device_dma_parameters dma_parms;
struct sdma_channel channel[MAX_DMA_CHANNELS];
struct sdma_channel_control *channel_control;
void __iomem *regs;
@@ -1317,6 +1318,8 @@ static int __init sdma_probe(struct platform_device *pdev)
sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
sdma->dma_device.device_control = sdma_control;
sdma->dma_device.device_issue_pending = sdma_issue_pending;
+ sdma->dma_device.dev->dma_parms = &sdma->dma_parms;
+ dma_set_max_seg_size(sdma->dma_device.dev, 65535);

ret = dma_async_device_register(&sdma->dma_device);
if (ret) {
--
1.7.2.3


\
 
 \ /
  Last update: 2011-01-31 13:03    [W:3.531 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site