lkml.org 
[lkml]   [2011]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.36/2.6.37: broken compatibility with userspace input-utils ?
On Thu, Jan 27, 2011 at 04:58:57PM -0200, Mauro Carvalho Chehab wrote:
> Em 27-01-2011 15:21, Dmitry Torokhov escreveu:
> > On Thu, Jan 27, 2011 at 08:30:00AM -0200, Mauro Carvalho Chehab wrote:
> >>
> >> On my tests here, this is working fine, with Fedora and RHEL 6, on my
> >> usual test devices, so I don't believe that the tool itself is broken,
> >> nor I think that the issue is due to the fix patch.
> >>
> >> I remember that when Kay added a persistence utility tool that opens a V4L
> >> device in order to read some capabilities, this caused a race condition
> >> into a number of drivers that use to register the video device too early.
> >> The result is that udev were opening the device before the end of the
> >> register process, causing OOPS and other problems.
> >
> > Well, this is quite possible. The usev ruls in the v4l-utils reads:
> >
> > ACTION=="add", SUBSYSTEM=="rc", RUN+="/usr/bin/ir-keytable -a /etc/rc_maps.cfg -s $name"
> >
> > So we act when we add RC device to the system. The corresponding input
> > device has not been registered yet (and will not be for some time
> > because before creating input ddevice we invoke request_module() to load
> > initial rc map module) so the tool runs simultaneously with kernel
> > registering input device and it could very well be it can't find
> > something it really wants.
> >
> > This would explain why Mark sees the segfault only when invoked via
> > udev but not when ran manually.
> >
> > However I still do not understand why Mark does not see the same issue
> > without the patch. Like I said, maybe if Mark could recompile with
> > debug data and us a core we'd see what is going on.
>
> Race conditions are hard to track... probably the new code added some delay,
> and this allowed the request_module() to finish his job.
>
> > BTW, that means that we need to redo udev rules.
>
> If there's a race condition, then the proper fix is to lock the driver
> until it is ready to receive a fops. Maybe we'll need a mutex to preventing
> opening the device until it is completely initialized.

No, not at all. The devices are ready to handle everything when they are
created, it's just some devices are not there yet. What you do with
current udev rule is similar to trying to mount filesystem as soon as
you discover a PCI SCSI card. The controller is there but disks have not
been discovered, block devices have not been created, and so on.

>
> It is hard to tell, as Mark didn't provide us yet the dmesg info (at least
> on the emails I was c/c), so I don't even know what device he has, and what
> drivers are used.

I belie you have been copied on the mail that had the following snippet:

> kernel: Registered IR keymap rc-rc5-tv
> udevd-event[6438]: run_program: '/usr/bin/ir-keytable' abnormal exit
> kernel: input: i2c IR (Hauppauge) as /devices/virtual/rc/rc0/input7
> kernel: ir-keytable[6439]: segfault at 8 ip 00000000004012d2 sp 00007fff6d43ca60 error 4 in ir-keytable[400000+7000]
> kernel: rc0: i2c IR (Hauppauge) as /devices/virtual/rc/rc0
> kernel: ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-0018/ir0 [ivtv i2c driver #0]

>
> > Maybe we should split
> > the utility into 2 parts - one dealing with rcX device and for keymap
> > setting reuse udev's existing utility that adjusts maps on ann input
> > devices, not for RCs only.
>
> It could be done, but then we'll need to pollute the existing input tools
> with RC-specific stuff. For IR, there are some additional steps, like
> the need to select the IR protocol, otherwise the keytable is useless.

That should be done by the separate utility that fires up when udev gets
event for /sys/class/rc/rcX device.

> Also, the keytable and persistent info is provided via /sys/class/rc/rc?/uevent.
> So, the tool need to first read the RC class, check what keytable should be
> associated with that device (based on a custom file), and load the proper
> table.

And this could be easily added to the udev's keymap utility that is
fired up when we discover evdevX devices.

>
> Also, I'm currently working on a way to map media keys for remote controllers
> into X11 (basically, mapping them into the keyspace between 8-255, passing
> through Xorg evdev.c, and then mapping back into some X11 symbols). This way,
> we don't need to violate the X11 protocol. (Yeah, I know this is hacky, but
> while X11 cannot pass the full evdev keycode, at least the Remote Controllers
> will work). This probably means that we may need to add some DBus logic
> inside ir-keytable, when called via udev, to allow it to announce to X11.

The same issue is present with other types of input devices (multimedia
keyboards emitting codes that X can't consume) and so it again would
make sense to enhance udev's utility instead of confining it all to
ir-keytable.

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2011-01-28 10:41    [W:0.136 / U:5.252 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site