lkml.org 
[lkml]   [2011]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: 2.6.36/2.6.37: broken compatibility with userspace input-utils ?
On Tue, Jan 25, 2011 at 03:29:14PM -0800, Dmitry Torokhov wrote:
> On Tue, Jan 25, 2011 at 05:22:09PM -0500, Mark Lord wrote:
> > On 11-01-25 05:00 PM, Mauro Carvalho Chehab wrote:
> > > Em 25-01-2011 18:54, Dmitry Torokhov escreveu:
> > >> On Wed, Jan 26, 2011 at 06:09:45AM +1000, Linus Torvalds wrote:
> > >>> On Wed, Jan 26, 2011 at 2:48 AM, Dmitry Torokhov
> > >>> <dmitry.torokhov@gmail.com> wrote:
> > >>>>
> > >>>> We should be able to handle the case where scancode is valid even though
> > >>>> it might be unmapped yet. This is regardless of what version of
> > >>>> EVIOCGKEYCODE we use, 1 or 2, and whether it is sparse keymap or not.
> > >>>>
> > >>>> Is it possible to validate the scancode by driver?
> > >>>
> > >>> More appropriately, why not just revert the thing? The version change
> > >
> > > Reverting the version increment is a bad thing. I agree with Dmitry that
> > > an application that fails just because the API version were incremented
> > > is buggy.
> > >
> > >> Well, then we'll break Ubuntu again as they recompiled their input-utils
> > >> package (without fixing the check). And the rest of distros do not seem
> > >> to be using that package...
> > >
> > > Reverting it will also break the ir-keytable userspace program that it is
> > > meant to be used by the Remote Controller devices, and uses it to adjust
> > > its behaviour to support RC's with more than 16 bits of scancodes.
> > >
> > > I agree that it is bad that the ABI broke, but reverting it will cause even
> > > more damage.
> >
> > There we disagree. Sure it's a very poorly thought out interface,
> > but the way to fix it is to put a new one along side the old,
> > and put the old back the way it was before it got broken.
> >
> > I'm not making a fuss here for myself -- I'm more than capable of working
> > around new kernel bugs like these, but for every person like me there are
> > likely hundreds of others who simply get frustrated and give up.
> >
> > If you're worried about Ubuntu's adaptation to the buggy regression,
> > then email their developers (kernel and input-utils packagers) explaining
> > the revert, and they can coordination their kernel and input-utils updates
> > to do the Right Thing.
> >
> > But for all of the rest of us, our systems are broken by this change.
> >
> > ...
> >
> >
> > >>> As Mark said, breaking user space simply isn't acceptable. And since
> > >>> breaking user space isn't acceptable, then incrementing the version is
> > >>> stupid too.
> > >>
> > >> It might not have been the best idea to increment, however I maintain
> > >> that if there exists version is can be changed. Otherwise there is no
> > >> point in having version at all.
> > >
> > > Not arguing in favor of the version numbering, but it is easy to read
> > > the version increment at the beginning of the application, and adjust
> > > if the code will use EVIOCGKEYCODE or EVIOCGKEYCODE_V2 of the ioctl's,
> > > depending on what kernel provides.
> > >
> > > Ok, we might be just calling the new ioctl and check for -ENOSYS at
> > > the beginning, using some fake arguments.
> > >
> > >> As I said, reverting the version bump will cause yet another wave of
> > >> breakages so I propose leaving version as is.
> > >>
> > >>>
> > >>> The way we add new ioctl's is not by incrementing some "ABI version"
> > >>> crap. It's by adding new ioctl's or system calls or whatever that
> > >>> simply used to return -ENOSYS or other error before, while preserving
> > >>> the old ABI. That way old binaries don't break (for _ANY_ reason), and
> > >>> new binaries can see "oh, this doesn't support the new thing".
> > >>
> > >> That has been done as well; we have 2 new ioctls and kept 2 old ioctls.
> >
> > That's the problem: you did NOT keep the two old ioctls().
> > Those got changed too.. so now we have four NEW ioctls(),
> > none of which backward compatible with userspace.
> >
>
> Please calm down. This, in fact, is not new vs old ioctl problem but
> rather particular driver (or rather set of drivers) implementation
> issue. Even if we drop the new ioctls and convert the RC code to use the
> old ones you'd be observing the same breakage as RC code responds with
> -EINVAL to not-yet-established mappings.
>
> I'll see what can be done for these drivers; I guess we could supply a
> fake KEY_RESERVED entry for not mapped scancodes if there are mapped
> scancodes "above" current one. That should result in the same behavior
> for RCs as before.
>

I wonder if the patch below is all that is needed...

Thanks!

--
Dmitry


Input: ir-keymap - return KEY_RESERVED for unknown mappings

Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped scancodes,
but rather return KEY_RESERVED.

This fixes breakage with Ubuntu's input-kbd utility that stopped returning
full keymaps for remote controls.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

drivers/media/IR/ir-keytable.c | 28 +++++++++++++++++-----------
1 files changed, 17 insertions(+), 11 deletions(-)


diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index f60107c..c4645d7 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -374,21 +374,27 @@ static int ir_getkeycode(struct input_dev *dev,
index = ir_lookup_by_scancode(rc_tab, scancode);
}

- if (index >= rc_tab->len) {
- if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
- IR_dprintk(1, "unknown key for scancode 0x%04x\n",
- scancode);
+ if (index < rc_tab->len) {
+ entry = &rc_tab->scan[index];
+
+ ke->index = index;
+ ke->keycode = entry->keycode;
+ ke->len = sizeof(entry->scancode);
+ memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
+
+ } else if (!(ke->flags & INPUT_KEYMAP_BY_INDEX)) {
+ /*
+ * We do not really know the valid range of scancodes
+ * so let's respond with KEY_RESERVED to anything we
+ * do not have mapping for [yet].
+ */
+ ke->index = index;
+ ke->keycode = KEY_RESERVED;
+ } else {
retval = -EINVAL;
goto out;
}

- entry = &rc_tab->scan[index];
-
- ke->index = index;
- ke->keycode = entry->keycode;
- ke->len = sizeof(entry->scancode);
- memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
-
retval = 0;

out:

\
 
 \ /
  Last update: 2011-01-26 03:03    [W:0.124 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site