lkml.org 
[lkml]   [2011]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] serio: allow registered drivers to get status flag
Am 18.01.2011 20:57, schrieb Dmitry Torokhov:
> On Tue, Jan 18, 2011 at 01:57:21PM +0100, David Engraf wrote:
>> Parse the status byte information to the registered serio drivers as
>> well as the character bytes.
>>
>> Signed-off-by: David Engraf<david.engraf@sysgo.com>
>>
>
>> --- linux-2.6.37/drivers/input/serio/serport.c.orig 2011-01-18 12:33:41.421709232 +0100
>> +++ linux-2.6.37/drivers/input/serio/serport.c 2011-01-18 13:33:24.521711214 +0100
>> @@ -116,8 +116,8 @@ static void serport_ldisc_close(struct t
>>
>> /*
>> * serport_ldisc_receive() is called by the low level tty driver when characters
>> - * are ready for us. We forward the characters, one by one to the 'interrupt'
>> - * routine.
>> + * are ready for us. We forward the characters and flags, one by one to the
>> + * 'interrupt' routine.
>> */
>>
>> static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
>> @@ -132,7 +132,7 @@ static void serport_ldisc_receive(struct
>> goto out;
>>
>> for (i = 0; i< count; i++)
>> - serio_interrupt(serport->serio, cp[i], 0);
>> + serio_interrupt(serport->serio, cp[i], fp[i]);
>>
>
> Hi David,
>
> The flags argument that serio_interrupt() accepts not the raw protocol
> data, but sanitized, protocol-independent SERIO_TIMEOUT, SERIO_PARITY
> and SERIO_FRAME bits.
>
> Thanks.
>

Hi Dmitry,

I've updated the patch so that the raw protocol is converted to the
SERIO_ bits. The raw protocol can parse only one flag, so I don't need
to store multiple SERIO_ bits in the character flag variable.

Thanks
- David


Signed-off-by: David Engraf<david.engraf@sysgo.com>

--- linux-2.6.37/drivers/input/serio/serport.c.orig 2011-01-18 12:33:41.421709232 +0100
+++ linux-2.6.37/drivers/input/serio/serport.c 2011-01-20 09:55:53.849550065 +0100
@@ -116,14 +116,15 @@ static void serport_ldisc_close(struct t

/*
* serport_ldisc_receive() is called by the low level tty driver when characters
- * are ready for us. We forward the characters, one by one to the 'interrupt'
- * routine.
+ * are ready for us. We forward the characters and flags, one by one to the
+ * 'interrupt' routine.
*/

static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
{
struct serport *serport = (struct serport*) tty->disc_data;
unsigned long flags;
+ unsigned int ch_flags;
int i;

spin_lock_irqsave(&serport->lock, flags);
@@ -131,8 +132,15 @@ static void serport_ldisc_receive(struct
if (!test_bit(SERPORT_ACTIVE, &serport->flags))
goto out;

- for (i = 0; i < count; i++)
- serio_interrupt(serport->serio, cp[i], 0);
+ for (i = 0; i < count; i++) {
+ ch_flags = 0;
+ if (fp[i] == TTY_FRAME)
+ ch_flags = SERIO_FRAME;
+ else if (fp[i] == TTY_PARITY)
+ ch_flags = SERIO_PARITY;
+
+ serio_interrupt(serport->serio, cp[i], ch_flags);
+ }

out:
spin_unlock_irqrestore(&serport->lock, flags);
\
 
 \ /
  Last update: 2011-01-20 10:09    [W:0.066 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site