Messages in this thread Patch in this message | | | From | Thomas Weber <> | Subject | [PATCHv4 2/4] OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration | Date | Wed, 19 Jan 2011 09:19:24 +0100 |
| |
From: Daniel Morsing <daniel.morsing@gmail.com>
gpio7 on the tps65930 is used as an output on the devkit8000 and gpio1 is not connected. Remove gpio7 and change gpio1 to pulldown
Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com> --- arch/arm/mach-omap2/board-devkit8000.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 719f4e5..9fb416b 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -262,8 +262,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), .setup = devkit8000_twl_gpio_setup, }; -- 1.7.4.rc2
| |